SMS: Troubleshooting Novell NetWare Client32 Clients
ID: Q158993
|
The information in this article applies to:
-
Microsoft Systems Management Server versions 1.1, 1.2
SUMMARY
Systems Management Server supports clients with the Novell NetWare Client32
Redirector for Windows 95. The Redirector can work quite successfully,
though there are many caveats.
The Client32 client logs on to a NetWare 3.12 or 4.0 Systems Management
Server logon server. It is not possible to use the Client32 Redirector to
log on to a Windows NT Server domain. There are also potential problems
with Windows 95 dual Redirector clients that log on both to a Windows NT
Server domain and a Novell server, but have Systems Management Server
installed and inventoried by the Windows NT Server logon server. Troubleshoot these clients with the steps below.
MORE INFORMATION
Manually running Invdos.exe /V from the SYS:SMS\LOGON.SRV\x86.bin directory may result in the following error if Runsms.bat has never been run:
Error Writing to File 00000000.tmp.
If the Runsms.bat has been run once, INVDOS runs correctly.
NOTE: This problem occurs with both the Client32 and the Microsoft Client for NetWare Networks.
Changing between Remote Troubleshooting utilities can be unreliable. You
may have to click the icon for the utility twice to establish a chat, or a
second attempt may result in an "unable to locate" message , forcing you to
quit the Remote utilities, or restart the client to reestablish the
connection.
Client32 will be more reliable if you perform the following steps:
- Use a fresh installation of Windows 95 with both of the following:
- Microsoft Client for NetWare Networks
- IPX Compatible Transport
- Run the Setup.exe program of the Novell Client32 with the updated Client32.nlm file (dated 9/23/96 or later) in the source.
- Configure the Client Logon screen to log on to a preferred server, and click to place a check in the Bindery box.
- Restart the computer.
- Map to the Sms\Logon.srv directory and run the Runsms.bat batch file, or run the Smsls.scr logon script.
This procedure may fail all or most of the time if any of the following
conditions are true:
NOTE: The TID numbers referenced below are Novell Technical Information Documents. You can find them at http://www.netware.com/.
- You have ever attempted to remove the Client32 by either running the (Novell) supported Client32 deinstall program or by manually removing it from the Network Control Panel (REF: TID2910349).
- The Microsoft Client for NetWare Networks was not installed before the Client32 installation (REF: TID2905984).
- An IPX compatible transport was not installed before the Client32 installation (REF: TID2905984).
- You ran the Smsls.scr without adding extensions to the entries for netspeed, dosver and clrlevel (REF: TID2907800).
NOTE: The Systems Management Server 1.2 Release Notes mention that you need to make an entry in the Net.cfg file, but Client32 does not use the Net.cfg. file
The product discussed here, the Novell NetWare Client32 for Windows 95, is
manufactured by Novell Inc., a manufacturer independent of Microsoft. We
make no warranty, implied or otherwise, regarding this product's performance or reliability.
Additional query words:
prodsms Win95 NW novel redirecter client 32
Keywords : kb3rdparty kbnetwork smsinv smshowto smsconfig
Version : winnt:1.1,1.2
Platform : winnt
Issue type : kbinfo
|