SMS: ScanDisk Runs After a Remote Reboot of a Windows 95 OSR2 Client

ID: Q181081

The information in this article applies to:

Microsoft Systems Management Server versions 1.1, 1.2

SYMPTOMS

When you use the Remote Reboot feature of Systems Management Server on a client computer running Windows 95 OEM Service Release 2 (OSR2), the following message is displayed during the restart:

Windows was not properly shut down. One or more of your disk drives may have errors on it. Press any key to run ScanDisk on these drives.

CAUSE

Remote Reboot issues a CPU reset instruction, not a graceful shutdown.

STATUS

Microsoft has confirmed this to be a problem in Systems Management Server versions 1.1 and 1.2. This problem has been corrected in the latest U.S. service pack for Systems Management Server version 1.2. For information on obtaining the service pack, query on the following word in the Microsoft Knowledge Base (without the spaces):


   S E R V P A C K

WORKAROUND

To work around this problem, do any one of the following:

Open the Msdos.sys file and add the following line to the [Options] section:
```
      Autoscan=0 
```
NOTE: This method completely disables the OSR2 Autoscan feature. The kernel does not check the Clean Shutdown and Hard Disk Error bits, and ScanDisk is not started.

Obtain the hotfix mentioned in STATUS section below. This fix should have the following timestamp:


      2/9/98   10:05am         144,896    Idisp16.dll

Wait for the next Systems Management Server service pack.

MORE INFORMATION

Windows 95 OSR2 includes versions of the Io.sys and Win.com files that check the Clean Shutdown and Hard Disk Error bits in the Virtual File Allocation Table (VFAT) during startup. If either of these bits is enabled (that is, cleared to 0) on any drive present in real mode, you are prompted to run ScanDisk. If you do not press a key within 60 seconds, ScanDisk runs anyway.

Additional query words: prodsms osr windows95 win95 win original equipment manufacturer

Keywords : smsremtshoot kbfix1.20.sp4 kbbug1.10 kbbug1.20
Version : winnt:1.1,1.2
Platform : winnt
Issue type : kbbug