SMS: Slownet Determines Network Speed at Logon

ID: Q224388

The information in this article applies to:

Microsoft Systems Management Server version 2.0

SUMMARY

Slownet.exe is called at logon in SMSLS to determine the network connection speed between the client and the logon point. Depending on the client platform, the file to which Slownet maps can be any of the following files:

Slwnt32.exe for Windows NT (Intel) and Windows 95/98 clients
Slwnt32a.exe for Windows NT (Alpha)
Slwnt16.exe for 16-bit Windows clients

Slownet's calculation of connection speed is a snapshot that varies substantially depending on a number of factors including, but not limited to, maximum connection speed, line quality, and current network load. The Windows 32 Slownet.exe uses the Win32 MultinetGetConnectionPerformance API call. This API calls asks the transport layer (for example, IP) to tell it how fast the connection is. SMS does not have any control over the return value from this API call. It could report a significantly slower speed than the actual connection, which can frequently be attributed to a slow network (not just a slow RAS connection).

If Slownet detects that a connection speed is less than 40 KB, the client installation routine is bypassed and the client is not installed.

Slownet can be used for the following tasks:

Determining the connection speed between a client and its server

Prompting the user to continue with the client installation despite a slow network connection being detected

Detecting whether the client is logging on to the network over RAS and bypassing the client installation if RAS is detected at all (similar to the Checkras utility's functionality)

In some circumstances, you may want to change the default threshold that Slownet uses to determine whether or not a client will be installed. If the threshold is lowered, keep in mind that the client installation may take a long time and may cause the user to wait at logon for components to be installed or upgraded.

If it is necessary to force clients to install over a slow link, consider the following options:

Changing the threshold speed specified in the logon script

Customizing the logon script to prompt the user whether or not to run the SMS client installation (after determining it is a slow link)

Removing all references to the Slownet.exe and Snboot.exe calls from the logon script

Adding a custom determination in the logon script (for example, "Is this user a member of the 'remote salespeople' group and therefore should always run SMS")

Using the Systems Management Installation wizard (Smsman.exe)

Using alternate discovery and installation methods such as Network Discovery or Windows NT Remote Client Installation

To determine exactly what Slownet is doing, you can run Slownet with the /v parameter to print verbose output to the screen.

MORE INFORMATION

Manually Determining the Connection with Slownet

You can use Slownet as a command-line utility on the client computer. If the Slownet.exe file is not already on the client, copy the appropriate Slwntxx.exe file to the client computer. Run the following command at a command prompt:

exename \\computername\sharenewspeed /verbose

For example:

slownet \\siteserver1\share 10000 /v

This command reports your calculated speed and tells you if your link is faster or slower than 10 Kbps.

To determine if the calculated speed is faster or slower than 40 Kbps (by default, Slownet detects for at least 40 Kbps), run the following command from a command prompt:

slwnt32 \\siteserver1\share /v

Note that if the server or share is not available, Slownet assumes a fast link and returns the following message:

Remote Name is \\siteserver1\c$
MultinetGetConnectionPerformance returned error: 2250. Defaulting to RAS Check
No RAS connections are present, assuming fast link

Modifing Slownet in the SMSLS Logon Script

If you want to modify the Slownet threshold, back up the Ssmsls.bat file in the Sms\Data\Nt_logon folder to Smsls.org. Then, modify the following lines in the Sms\Data\Nt_logon directory\Smsls.bat file:

:OK_TO_PROCEED
Replace: %SMS_LOCAL_DIR%\MS\SMS\CORE\BIN\Slownet.exe %0
With: %SMS_LOCAL_DIR%\MS\SMS\CORE\BIN\Slownet.exe %0 1000

:SLOWNETUSER
Replace: %SMS_LOCAL_DIR_USER%\MS\SMS\CORE\BIN\Slownet.exe %0
With: %SMS_LOCAL_DIR_USER%\MS\SMS\CORE\BIN\Slownet.exe %0 1000

:SLOWNETTEMP
Replace: %TEMP%\Slownet.exe %0
With: %TEMP%\Slownet.exe %0 1000

:SLOWNETSERVER
Replace: %0\..\SNBOOT.exe
With: %0\..\SNBOOT.exe 1000

NOTE: The server and share names must be in all lowercase letters. This example presumes a minimal connection speed of 1000 bps, but this value can be any value less than 40,000.

If the Smsls.bat file is changed after the creation of the logon point, copy the updated Smsls.bat file to the %Windir%\System32\Repl\Export\Scripts and %Windir%\System32\Repl\Import\Scripts folders on the logon server.

Slownet with RAS

When you dial in over RAS, the speed Slownet detects may be lower than the dial-up status indicator, as indicated in the following table.


   Client modem  RAS server modem  Dial-up reports  Slownet reports
   ----------------------------------------------------------------
   USR 33.6      USR 33.6          28.8 to 33.6     3500 
   IBM 56k       USR 33.6          28.8 to 57.6     3500 to 3800 
   IBM 56k       USR 56K           57.6 to 115k     11500 to 11600

When a RAS client runs the SMSLS batch file at logon, Slownet.exe is copied to the client and run. If it detects that the connection speed is slower than 40 KB, the client is not installed.

It is possible to use Slownet to only determine whether a client is using a RAS connection. To do so, substitute the connection speed with 0. For example:

slownet \\siteserver1\share 0 /v

If RAS is detected, the return code is 0.

If you want to prevent the client from having any files (including Slownet) installed at logon, you can use the Checkras utility included in the BackOffice Resource Kit. Checkras.exe checks for RAS connections on the client instead of trying to determine the link speed. You can use the Checkras.exe utility in your logon script to determine whether or not a user is connected by a RAS connection, and then include commands in your logon script based on the results returned by Checkras.exe.

The following sample Windows NT domain logon script uses Checkras.exe:


@echo off

echo Checking for existence of RAS files


if exist %windir%\system32\RASAPI32.DLL goto ras_status

if exist %windir%\system\RASAPI32.DLL goto ras_status

goto notras


:ras_status

echo Checking for existence of Checkras.exe

if exist %windir%\checkras.exe goto yes_checkras

copy \\server\netlogon\checkras.exe %windir%


:yes_checkras

echo Checking for RAS connection

%windir%\checkras

if errorlevel 1 goto ras

echo This is not a RAS connection

goto end


:notras

echo RAS is not installed on this system

goto end


:ras

echo RAS connection detected

REM Enter RAS-specific command here.


:end

NOTE: Windows NT 3.51 clients are not supported with Systems Management Server 2.0 over RAS. If Windows NT 3.51 clients will be logging in over RAS, Checkras must be used to prevent them from installing the SMS client.

For additional information about client installation, click the article number below to view the article in the Microsoft Knowledge Base:

Q202338 SMS: Pre-stage Clients To Avoid Bandwidth Contention In Install

Additional query words: prodsms relnote SMS2 netspeed

Keywords : kbtool dun kbSMS200
Version : winnt:2.0
Platform : winnt
Issue type : kbinfo