SMS: "Insert Disk in Drive A:" Message During Hardware Inventory

ID: Q239915

The information in this article applies to:

Microsoft Systems Management Server versions 2.0, 2.0 SP1

SYMPTOMS

During a hardware inventory cycle of Microsoft Windows NT, Microsoft Windows 95, or Microsoft Windows 98 clients, you may receive the following prompt:

Insert disk in drive A:

If you examine the client's Hinv32.log file, hardware inventory was enumerating the Windows Management Instrumentation (WMI) class Win32_LogicalDisk when the prompt was generated.

CAUSE

The WMI class Win32_LogicalDisk is enumerated during the hardware inventory cycle, which queries for volume information on drives attached to the client. WMI normally suppresses the "Insert disk in drive" prompt, but on occasion may be overridden.

RESOLUTION

A supported fix that corrects this problem is now available from Microsoft, but it has not been fully regression tested and should be applied only to systems experiencing this specific problem. If you are not severely affected by this specific problem, Microsoft recommends that you wait for the next Systems Management Server service pack that contains this fix.

To resolve this problem immediately, contact Microsoft Product Support Services to obtain the fix. For a complete list of Microsoft Product Support Services phone numbers and information on support costs, please go to the following address on the World Wide Web:

http://www.microsoft.com/support/supportnet/overview/overview.asp

The English-language version of this fix should have the following file attributes or later:


   Date        Version          Size    File name   Platform
   -----------------------------------------------------------
   08/04/99   2.00.1380.1013  3,806,179 Wbemsdk.exe   x86
   08/10/99   2.00.1380.1013         67 Compver.ini   x86
   08/04/99   2.00.1380.1013  7,163,252 Wbemsdk.exe   Alpha
   08/10/99   2.00.1380.1013         67 Compver.ini   Alpha

WORKAROUND

To temporarily work around the problem, you can disable the WMI class Win32_LogicalDisk enumeration. To disable hardware inventory of the Win32_Logical disk class, you can edit the Sms_def.mof file.

WARNING: Exercise caution when editing .mof files. You should create a backup copy of the .mof file before editing it.

Modify the master Sms_def.mof file on each site server in turn, or modify it on one server and then copy it to all others. The Sms_def.mof file is located in the X:\SMS\Inboxes\Clifiles.src\Hinv folder. You can open the file with WordPad or Notepad. To disable win32_LogicalDisk enumeration, locate the following entry:


   [SMS_Report (TRUE), SMS_Group_Name ("Logical Disk"),
   ResID(2100),ResDLL("SMS_RXPL.dll"),
   SMS_Class_ID("MICROSOFT|LOGICAL_DISK|1.0")]
   class Win32_LogicalDisk : SMS_Class_Template

Change the first line "[SMS_Report (TRUE)" to "(FALSE)" to disable the entire class.

STATUS

Microsoft has confirmed this to be a problem in Systems Management Server versions 2.0 and 2.0 Service Pack 1.

MORE INFORMATION

To install the hotfix, follow these steps on each Systems Management Server 2.0 and 2.0 Service Pack 1 site server :

Stop the SMS_SITE_COMPONENT_MANAGER and SMS_EXECUTIVE site services.

Copy the updated Wbemsdk.exe file to the site server's SMS\bin\Platform folder.

Copy the updated Wbemsdk.exe file to the site server's SMS\Inboxes\Clicomp.src\Wbem\Platform folder.

Copy the updated Compver.ini file to the site server's SMS\Inboxes\Clicomp.src\WBEM folder.

Start the SMS_SITE_COMPONENT_MAANGER and SMS_EXECUTIVE services.

NOTE: After the SMS Inbox Manager component updates the Client Access Points (CAP), the clients can gain access to the updated files. The default Client Configuration Installation Manager (CCIM) polling interval is 23 hours. Therefore, it may take up to 23 hours for the hotfix files to be propagated to the clients. To speed up this process, you can stop and restart the SMS Client service on each client. You can also create a software distribution for one of the Resource Kit tools (Setevnt.exe or Cliutils.exe), along with the appropriate parameter(s) to start a CCIM work cycle. For information about the proper syntax to use with these tools, see the Resource Kit documentation.

Additional query words: prodsms

Keywords : kbHinv
Version : winnt:2.0,2.0 SP1
Platform : winnt
Issue type : kbprb