SNA Server Sample VTAM/CICS Parameters for Independent LU6.2
ID: Q120036
|
The information in this article applies to:
-
Microsoft SNA Server, versions 2.0, 2.1, 2.11, 2.11 SP1, 3.0, 3.0 SP1, 3.0 SP2, 3.0 SP3, 4.0, 4.0 SP1
SUMMARY
This article includes the following sections:
- Sample VTAM and CICS Parameters for Independent LU 6.2
- Sample VTAM Parameters for Use with LU 6.2
NOTE: This information was added to the SNA Server 2.1 Admin Guide, pg 111-
116. It is also in SNA Server 3.0 Admin Guide pg 198-209.
MORE INFORMATION
Sample VTAM and CICS Parameters for Independent LU 6.2.
The following sections show some sample VTAM and CICS configurations
for independent LU 6.2. For more information, see the appropriate IBM
manuals, or access the IBM APPC forum on CompuServe; to do this, at
any ! prompt, type go appc. One document available through the IBM
APPC forum is MPCONT.ZIP, a multi-platform LU 6.2 configuration guide
containing information about CICS and VTAM.
Sample VTAM Parameters for Use with LU 6.2.
The lists in this section show sample VTAM parameters that might be
used for communication using independent LU 6.2. The underlined values
correspond to values specified in SNA Server Admin.
SERVER1 PU ADDR=09, X
IDBLK=05D, X
_________
IDNUM=11111, X
___________
CPNAME=SNASERV, X
______________
ISTATUS=ACTIVE X
DLOGMOD=D4C32782, X
MODETAB=ISTINCLM, X
MAXDATA=521, X
___________
MAXPATH=1, X
PUTYPE=2, X
SSCPFN=USSSCS, X
MAXOUT=7, X
PASSLIM=4, X
PACING=0, X
DISCNT=NO, X
USSTAB=USSTAB
TRPATH PATH DIALNO=2223331234567890, X
GRPNM=AAA01, X
GID=2
LOCLU1 LU LOCADDR=0, X
ISTATUS=ACTIVE,DLOGMOD=APPCMODE, X
________________
RESSCB=25,USSTAB=USSTAB,PACING=0, X
VPACING=0
Note that in the preceding example, the LOCADDR= value for the LOCLU1
is 0. This is the correct value to use with independent LU 6.2 LUs.
The following table shows the SNA Server parameters and values that
correspond to the preceding sample VTAM parameters:
SNA Server Parameter Sample value VTAM parameter
---------------------------------------------------------------------------
Connection: Local Node ID, 05D IDBLK in PU definition
first three digits (block number)
Connection: Local Node ID, 11111 IDNUM in PU definition
last five digits (block number)
Server: Control Point Name SNASERV CPNAME in PU definition
Connection: Max BTU Length 521 MAXDATA in the PU
definition
Local APPC LU: LU Name LOCLU1 Name in LU definition
LU 6.2 Partner LUs: Mode APPCMODE DLOGMOD parameter in
the LU definition
The following list shows mode table entries for use with independent
LU 6.2 LUs.
*********************************************************
* LOGMODE TABLE ENTRY FOR RESOURCES *
* CAPABLE OF ACTING AS LU 6.2 DEVICES *
*********************************************************
SNASVCMG MODEENT LOGMODE=SNASVCMG,FMPROF=X'13', X
TSPROF=X'07',PRIPROT=X'B0', X
SECPROT=X'B0',COMPROT=X'D0B1', X
RUSIZES=X'8585',ENCR=B'0000', X
PSERVIC=X'060200000000000000000300'
APPCMODE MODEENT LOGMODE=APPCMODE, X
________
TYPE=0, X
FMPROF=X'13', X
TSPROF=X'07', X
PRIPROT=X'B0', X
SECPROT=X'B0', X
COMPROT=X'50B1', X
PSNDPAC=X'03', X
SRCVPAC=X'03', X
RUSIZES=X'8585', X
PSERVIC=X'060200000000000000002F00'
In the preceding list, the mode named APPCMODE is an example of a
mode configured for use with LU 6.2. (Note that the mode named
SNASVCMG is included in SNA Server, since it is required for parallel
session support; it does not need to be configured in SNA Server
Admin.)
Sample CICS Configuration Screens for Use with LU 6.2
The following series of screens show how CICS could be configured for
independent LU 6.2 through VTAM. In the first screen, the underlined
values correspond to values specified in SNA Server Admin.
_________________________________________________________________
OVERTYPE TO MODIFY CICS RELEASE = 0330
CEDA ALter
Sessions : LOCLU1
_______________________
Group : VER3AAAA
DEscription ==> VERSION 3 LU 6.2 SESSION ENTRY
SESSION IDENTIFIERS
Connection ==> CON1
SESSName ==>
NETnameq ==>
MOdename ==> APPCMODE
_________________________
SESSION PROPERTIES
Protocol ==> Appc Appc | Lu61
MAximum ==> 250 , 125 0-999
__________________________
RECEIVEPfx ==>
RECEIVECount ==> 1-999
SENDPfx ==>
SENDCount ==> 1-999
SENDSize ==> 00521 1-30720
______________________
RECEIVESize ==> 00521 1-30720
APPLID=CICSLU
PF 1 HELP 2 COM 3 END 6 CRSR 7 SBH 8 SFH 9 MSG 10 SB 11 SF 12 CNCL
_________________________________________________________________
The following table shows the SNA Server parameters and values that
correspond to the preceding sample CICS parameters:
SNA Server Parameter Sample value CICS parameter
-------------------------------------------------------------------
LU Name for Local APPC LU LOCLU1 Sessions
Mode name APPCMODE MOdename
Parallel Session Limit 250 MAximum
Partner Min Contention 125 MAximum
Max Receive RU Size 00521 SENDSize
in the mode
Max Send RU 00521 RECEIVESize
in the mode
LU Name for Remote APPC LU CICSLU APPLID
In the sample CICS screen, the parameter called MAximum has two
values, 250 and 125, separated by commas. The first value (250) is
the parallel session limit. The second value (125) is the host
minimum contention winner limit. On the SNA server, this corresponds
to Partner Min Contention Winner Limit in the mode. In addition,
since the host is the contention winner on 125 sessions (out of a
total of 250), then SNA Server should be configured as the contention
winner on the remaining 125 sessions. In this case, the SNA Server
mode would have the following values:
* Parallel Session Limit 250
* Minimum Contention Winner Limit 125
* Partner Min Contention Winner Limit 125
* Automatic Activation Limit 0
The remaining screens in this section show more information about how
CICS could be configured for independent LU 6.2 through VTAM.
_________________________________________________________________
OVERTYPE TO MODIFY CICS RELEASE = 0330
CEDA ALter
SESSION PROPERTIES
SESSPriority ==> 000 0-255
Transaction :
OPERATOR DEFAULTS
OPERId :
OPERPriority : 000 0-255
OPERRsl : 0 0-24,...
OPERSecurity : 1 1-64,...
PRESET SECURITY
USERId ==>
OPERATIONAL PROPERTIES
Autoconnect ==> Yes No | Yes | All
INservice : No | Yes
Buildchain ==> Yes Yes | No
USERArealen ==> 000 0-255
IOarealen ==> 00000 , 00000 0-32767
RELreq ==> No No | Yes
DIscreq ==> No No | Yes
NEPclass ==> 000 0-255
RECOVERY
RECOVOption ==> Sysdefault Sysdefault | Clearconv
| Releasesess | Uncondrel
| None
RECOVNotify ==> None None | Message | Transaction
APPLID=CICSLU
PF 1 HELP 2 COM 3 END 6 CRSR 7 SBH 8 SFH 9 MSG 10 SB 11 SF 12 CNCL
_________________________________________________________________
In the following screen, the underlined value corresponds to the LU
Name of the local APPC LU in SNA Server.
_________________________________________________________________
OVERTYPE TO MODIFY CICS RELEASE = 0330
CEDA ALter
Connection : CON1
Group : VER3AAAA
DEscription ==> VERSION 3 LU 6.2 DEFINITION
CONNECTION IDENTIFIERS
Netname ==> LOCLU1
INDsys ==>
REMOTE ATTRIBUTES
REMOTESystem ==>
REMOTEName ==>
CONNECTION PROPERTIES
ACcessmethod ==> Vtam Vtam | IRc
|INdirect | Xm
Protocol ==> Appc Appc | Lu61
SInglesess ==> No No | Yes
DAtastream ==> User User | 3270 | SCs
|STrfield | Lms
RECordformat ==> U U | Vb
OPERATIONAL PROPERTIES
AUtoconnect ==> Yes No | Yes | All
INService ==> Yes Yes | No
SECURITY
SEcurityname ==>
ATtachsec ==> Verify Local | Identify
|Verify | Persistent
|Mixidpe
BINDPassword ==> PASSWORD SPECIFIED
BINDSecurity ==> No No | Yes
APPLID=CICSLU
PF 1 HELP 2 COM 3 END 6 CRSR 7 SBH 8 SFH 9 MSG 10 SB 11 SF 12 CNCL
_________________________________________________________________
Additional query words:
prodsna
Keywords : kbnetwork ntnetserv sna211 sna211sp1 sna3 sna3sp1 sna3sp2 sna3sp3 sna4 sna4sp1 sna2 sna21
Version : WINDOWS:2.0,2.1,2.11,2.11 SP1,3.0,3.0 SP1,3.0 SP2,3.0 SP3,4.0,4.0 SP1
Platform : WINDOWS
Issue type :