SNA Err Msg: Configuration Error. Allocation Error....

ID: Q121592


The information in this article applies to:
  • Microsoft SNA Server, versions 2.0, 2.1, 2.11, 2.11 SP1, 2.11 SP2, 3.0, 3.0 SP1, 3.0 SP2, 3.0 SP3, 4.0, 4.0 SP1


SYMPTOMS

When you attempt to connect to an AS/400 through the SNA Server's Win5250 applet, the following error message may appear after the user name and password are entered in the session level sign-on screen:

Configuration Problem
Allocation Error. Security Not Valid. RC 0003 080F6051.


CAUSE

This error condition occurs when the AS/400 device security has been set incorrectly.

NOTE: The following similar error message appears when the incorrect user name and password are entered at the session level sign-on screen, but should not be confused with the aforementioned error condition:

The userid or password is not valid. Try again or contact your system administrator. Primary return code: 0003 Secondary return code: 080F6051


WORKAROUND

To correctly sign on, the Limit Device Access value on the AS/400 needs to be set to "0=Explicit device access not needed." In the failing condition, this value will be set to "1= Explicit device access needed."

To check this value, do the following:

  1. At the AS/400 Main menu, type WRKSYSVAL and then press ENTER. ("WRKSYSVAL" means Work with System Values.)


  2. Scroll down the list to QLMTSECOFR and place a 5 on the adjacent line and then press ENTER.


  3. At the Display System Value screen, change the Limit Device Access value to 0.


Additional query words: prodsna 2.10 2.00

Keywords : sna211 sna211sp1 sna211sp2 sna3 sna3sp1 sna3sp2 sna3sp3 sna4 sna4sp1 sna2 sna21
Version : WINDOWS:2.0,2.1,2.11,2.11 SP1,2.11 SP2,3.0,3.0 SP1,3.0 SP2,3.0 SP3,4.0,4.0 SP1
Platform : WINDOWS
Issue type :


Last Reviewed: September 29, 1999
© 2000 Microsoft Corporation. All rights reserved. Terms of Use.