SNA Server Err Msg: Event 23, Outage Code "2D" (Abnormal Resp.)

• Microsoft SNA Server, versions 2.0, 2.1, 2.11, 2.11 SP1, 2.11 SP2, 3.0, 3.0 SP1, 3.0 SP2, 3.0 SP3, 4.0, 4.0 SP1

SYMPTOMS

If the Microsoft SNA Server Synchronous Data Link Control (SDLC) connection is configured with the Maximum BTU Size set to a value less than the maximum frame size of the remote system (set using the PU macro MAXDATA parameter in VTAM), the following SNA Server connection failure may be logged in the Windows NT application event log:

Event 23, Outage code "2D" (abnormal response)

CAUSE

The abnormal response error occurs if the host banner screen (that is, the USSTAB message 10 screen) exceeds the Maximum BTU size set in SNA Server. Because the maximum frame size is not negotiated until a BIND takes place, the SNA Server's maximum frame size can be exceeded.

RESOLUTION

To correct this problem, change the SNA Server Maximum BTU size to match the value used on the remote system.

NOTE: If an IBM SDLC adapter or MicroGate SDLC adapter is being used with SNA Server, the maximum frame size supported by Microsoft SNA Server is 521. Other SDLC adapters do not have this restriction.

Additional query words: ntprotocol prodsna configured

Keywords : kbnetwork ntnetserv sna211 sna211sp1 sna211sp2 sna3 sna3sp1 sna3sp2 sna3sp3 sna4 sna4sp1 sna2 sna21
Version : WINDOWS:2.0,2.1,2.11,2.11 SP1,2.11 SP2,3.0,3.0 SP1,3.0 SP2,3.0 SP3,4.0,4.0 SP1
Platform : WINDOWS
Issue type :