Event ID 49: Node ID from Remote Computer was Rejected
ID: Q126399
|
The information in this article applies to:
-
Microsoft SNA Server, versions 2.0, 2.1, 2.11, 2.11 SP1, 3.0, 3.0 SP1, 3.0 SP2, 3.0 SP3
SYMPTOMS
On your SNA Server, an attempted connection is not able to activate and
holds in a pending state. The following events appear in the Application
Event log:
Event ID: 49
Description: Node ID from remote computer was rejected.
Event ID: 55
Description: No incoming connection matched info on XID from remote
MAC address <MAC address>.
From the SNA Server client, when you attempt to connect using a 5250
emulator the following error message appears:
There is a problem with the configuration of the connection to the
AS/400
Primary return code = 0003
Secondary return code = 00000005
CAUSE
One of the three following conditions exist:
- The Network Name in the Connection Properties or the Server properties
does not match the Local Network ID in the Network attributes screen on
the AS/400.
- The Remote Control Point Name in the Connection Properties does not
match the Local Control Point name defined in the AS/400 Network
Attribute Screen.
- The Remote Node ID in the Connection properties is filled in. It
should be blank.
RESOLUTION
Reconfigure to correct the problem.
Additional query words:
prodsna
Keywords : kbenv kbnetwork ntconfig snaadmin snasetup sna211 sna211sp1 sna3 sna3sp1 sna3sp2 sna3sp3 sna2 sna21
Version : WINDOWS:2.0,2.1,2.11,2.11 SP1,3.0,3.0 SP1,3.0 SP2,3.0 SP3
Platform : WINDOWS
Issue type :