SNA EIS Guide: Open(SSCP)Error 0x1009, 0x100B Not Documented

ID: Q148736


The information in this article applies to:
  • Microsoft SNA Server, versions 2.0, 2.1, 2.11, 2.11 SP1
    on the following platforms: NT


SYMPTOMS

Section 5.2.1 of the SNA Server 3270 Emulator Interface Specification (EIS) lists Open(SSCP) errors that SNA Server may return to an emulator when it opens a 3270 session. However, the following Error Code 1 errors are not listed in this section:

X'1009': The local link service for the connection is active but the connection itself is not active. The 3270 emulator should report to the user that the connection is not active, or try reposting a new Open(SSCP) request.
X'100B': The connection is in the process of activating as the result of another Open(SSCP) client request, manual administrator activation, or automatic recovery from a previous connection failure. The 3270 emulator should report to the user that the connection is activating, and try reposting a new Open(SSCP) request.


CAUSE

These errors were inadvertently omitted from the SNA Server 3270 EIS manual.


STATUS

Microsoft has confirmed this to be a problem in Microsoft SNA Server. A future update to the SNA Server Emulator Interface Specification will correct this problem.

Additional query words: prodsna 2.00 2.10 2.11 SP1

Keywords : ntnetserv
Version : WINDOWS:2.0,2.1,2.11,2.11 SP1
Platform : WINDOWS
Issue type :


Last Reviewed: October 5, 1999
© 2000 Microsoft Corporation. All rights reserved. Terms of Use.