SNA Server May Log Events 442, 443, 444, 445, and 446
ID: Q151238
|
The information in this article applies to:
-
Microsoft SNA Server, versions 2.0, 2.1, 2.11, 2.11 SP1
on the following platforms: NT
SYMPTOMS
When you use the DCA IRMA Workstation for Windows 3270 emulator over the
SNA Server version 2.0 or 2.1 Windows 3.x client interface, the following
event log entries may be logged to the Microsoft Windows NT application
event log:
Event ID 442, 443, 444, 445, 446
CAUSE
The DCA IRMA Workstation product was originally developed to work with the
DCA/Microsoft OS/2 Communications Server gateway product (the predecessor
to Microsoft SNA Server), and called the internal event logging functions
that were still supported in the SNA Server 2.0 and 2.1 Windows 3.x client
binaries. These logging functions have been disabled if the SNA Server 2.11
Windows 3.x client binaries are used, so the above events should no longer
appear in the Windows NT application event log.
This article documents the meaning of the above events, and are not
documented in the SNA Server [ASCII 147]Reference Guide.[ASCII 148]
MORE INFORMATION
Here is the information regarding the above events, as described in
the DCA/Microsoft Communications Server "Reference Guide":
--------------------------------------------------------------------
Event ID: 442
Description:
<Username> has started session with host application
<applname>, local LU name = <luname>, LU address = <luaddr>.
The 3270 user session shown is started.
No action is necessary
--------------------------------------------------------------------
Event ID: 443
Description:
<Username> has ended session with host application
<applname>, local LU name = <luname>, LU address = <luaddr>.
The 3270 user session shown has ended
No action is necessary
--------------------------------------------------------------------
Event ID: 444
Description:
<Username> session session with host application <applname>
has failed, local LU name = <luname>, LU address = <luaddr>.
The 3270 user session has failed.
Check for other messages indicating reasons for the failure and
follow the action specified for the messages.
--------------------------------------------------------------------
Event ID: 445
Description:
3270 emulation started.
This is an informational message.
No action is necessary.
--------------------------------------------------------------------
Event ID: 446
Description:
3270 emulation finished.
This is an informational message.
No action is necessary.
--------------------------------------------------------------------
Additional query words:
2.00 2.10 2.11
Keywords : prodsna
Version : WINDOWS:2.0,2.1,2.11,2.11 SP1
Platform : WINDOWS
Issue type :