SNA Server 3.0 Windows 95 Clients Hang when Using Encryption

ID: Q165311


The information in this article applies to:
  • Microsoft SNA Server, version 3.0


SYMPTOMS

Windows 95 SNA Server 3.0 clients appear to stop responding (hang) when they are trying to connect to an SNA Server that exists in a non-trusted Windows NT server domain.

This problem occurs under either of the following conditions:

Case 1: "Use Client/Server Encryption"

The "Use Client/Server Encryption" option is selected for the configured users/groups in SNA Server Manager.

Case 2: "Use Windows NT Domain Password"

The "Use Windows NT domain password" option is not selected in the Windows 95 SNA Server client configuration. This option is available by selecting the Advanced tab after running the SNA Client Configuration program.


CAUSE

There is a different cause for each condition described in the "Symptoms" section of this article.

Case 1: "Use Client/Server Encryption"

If Client/Server Encryption is being used, the client/server encryption check fails because the client is in a non-trusted domain causing the client to hang.

Case 2: "Use Windows NT Domain Password"

The Windows 95 SNA Server client uses the LsaLogonUser() call when attempting to log the user on, even though the "Use Windows NT domain password" option is not selected. This was causing the logon attempt to fail and this caused the Windows 95 client to hang.


RESOLUTION

Two problems were corrected to resolve the problem.

Case 1: "Use Client/Server Encryption"

The SNA Server client transports were updated, such that the SNA Server client is disconnected if the client/server encryption check fails. The updated modules for this fix are:
<Snaroot>\System\Snaat.dll
<Snaroot>\System\Snabv.dll
<Snaroot>\System\Snalm.dll
<Snaroot>\System\Snalm.dll
<Snaroot>\System\Snanb.dll
<Snaroot>\System\Snanw.dll
<Snaroot>\System\Snadmod.dll
<Snaroot>\System\Snaevent.dll

Case 2: "Use Windows NT Domain Password"

The Windows 95 SNA Server 3.0 client has been updated to use the NTLM logon process instead of the LsaLogonUser() logon procedure when the "Use Windows NT domain password" option is not selected. The updated modules for this fix are:
<Snaroot>\System\Snabase.exe
<Winroot>\System\Snakrnl.dll


STATUS

Microsoft has confirmed this to be a problem in SNA Server version 3.0. This problem was corrected in the latest Microsoft SNA Server 3.0 U.S. Service Pack. For information on obtaining the service pack, query on the following word in the Microsoft Knowledge Base (without the spaces):

S E R V P A C K

Additional query words:

Keywords : kbnetwork prodsna kbbug3.00 kbfix3.00.sp1 snawin95
Version : WINDOWS:3.0
Platform : WINDOWS
Issue type : kbbug


Last Reviewed: November 23, 1999
© 2000 Microsoft Corporation. All rights reserved. Terms of Use.