LU3 Print Job Fails If Data Includes X'27' Control Codes

• Microsoft SNA Server, versions 3.0, 3.0 SP1, 3.0 SP2, 4.0

SYMPTOMS

SNA Server's Host Print Service rejects LU3 print jobs that contain X'27' control codes. The X'27' control code is the EBCDIC equivalent of an ASCII X'1B' control code. The ASCII X'1B' control code is the PCL Escape code for Hewlett-Packard Printer Control Language (PCL) printers.

When the print server receives an LU3 print job that contains an invalid EBCDIC control code, it returns an IBM sense code X'1003' to SNA Server. SNA Server then sends an -RSP message to the host with the X'1003' sense code, which terminates the print job.

Note: All EBCDIC codes below X'40' are invalid.

Sense Code X'1003' is defined in the IBM SNA Formats Guide (GA27-3136) as follows:

Function not supported: The function requested is not supported. The function may have been specified by a formatted request code, a field in an RU, or a control character.

Event ID: 21
Source: SNA Server
Description: (X'1124') Negative Response Sent on Connection <connection
name> (SENSE = 1003)

CAUSE

The print service is designed to reject invalid EBCDIC control codes. Because the X'27' control code is below X'40', it is rejected with a X'1003' sense code.

The LU3 print data stream was not intended to support the inclusion of PCL control codes that were intended to be passed to PCL printers. LU1 print jobs do support transparent sections that can include PCL control codes.

STATUS

Microsoft has confirmed this to be a problem in SNA Server versions 3.0, 3.0 SP1, 3.0 SP2, and 4.0.

This problem was corrected in the latest SNA Server versions 3.0 and 4.0 U.S. Service Packs. For information on obtaining these Service Packs, query on the following word in the Microsoft Knowledge Base (without the spaces):

S E R V P A C K

MORE INFORMATION

WARNING: Using Registry Editor incorrectly can cause serious problems that may require you to reinstall your operating system. Microsoft cannot guarantee that problems resulting from the incorrect use of Registry Editor can be solved. Use Registry Editor at your own risk.

For information about how to edit the registry, view the "Changing Keys And Values" Help topic in Registry Editor (Regedit.exe) or the "Add and Delete Information in the Registry" and "Edit Registry Data" Help topics in Regedt32.exe. Note that you should back up the registry before you edit it.

The print service has been updated to accommodate LU3 print jobs that contain PCL control codes that begin with X'27' control codes. In addition to obtaining the fix for this problem, the following steps also need to be performed to allow the X'27' control codes to be accepted by the print server:

1. Add the following registry entry:

   
   HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services
         \SnaPrint\Parameters\LetHex27Pass: REG_SZ: <value> 

   Where: Value can be set to anything (for example, Yes, On, and so on). As long as this parameter exists, the X'27' control codes will be accepted by the print server.



2. Configure a Custom Code Page that maps the EBCDIC X'27' code to an ASCII X'1B' code. Please refer to Appendix E of the online version of the SNA Server 3.0 Reference Guide for details on Custom Code Pages.



3. Configure and use a Printer Definition Table (PDT) file for the print sessions that will be printing the LU3 jobs that contain these control codes. The PDT file does not need to contain any special options. The default hplj2.pdf file included with SNA Server can be compiled and used. This is needed so that the print job is not passed through Graphical Device Interface (GDI). Please refer to Chapter 7 of the online version of the SNA Server 3.0 Reference Guide for details on PDTs.

Q195354 LU3 Print Sessions Don't Support Transparent Print Sections

Additional query words:

Keywords : prodsna kbfix3.00.sp3 snaprintservice
Version : WINDOWS:3.0,3.0 SP1,3.0 SP2,4.0
Platform : WINDOWS
Issue type : kbbug