The information in this article applies to:
SYMPTOMSPrint Server does not support the Vertical Channel Select(VCS) SCS code (X'04 xx'). When Print Server receives a VCS command in the datastream, it does an LF (Line Feed, X'25') instead. STATUS
Microsoft has confirmed this to be a problem in SNA Server versions 3.0,
3.0 SP1, 3.0 SP2 and 4.0.
S E R V P A C K MORE INFORMATION
With the fix applied, the Ppd3270.dll file is changed so that it recognizes
the VCS command and handles it appropriately.
This is a Set Vertical Format command, with the following parameters:
The Host then sent down the following:
This is a Vertical Channel Select command (04), selecting vertical channel
2 (82). Vertical channel 1 is always the top margin and vertical channel
2 is the first vertical tab stop as defined in the Set Vertical Format
command above (that is, line 11). Print Server processes this command by
issuing 1 line feed, but it should issue 10 line feeds (to get to line 11.
This can be clearly seen with extended job tracing turned on:
Printserver is ignoring the '82.'
Additional query words:
Keywords : kbprint kbbug4.00 kbbug3.00 kbbug3.00.sp2 kbfix3.00.sp3 kbbug3.00.sp1 snaprintservice |
Last Reviewed: September 22, 1999 © 2000 Microsoft Corporation. All rights reserved. Terms of Use. |