How to Use EVTSCAN with Netmon Tracing to Capture Event 23s

• Microsoft SNA Server, versions 2.11, 2.11 SP1, 2.11 SP2, 3.0, 3.0 SP1, 3.0 SP2, 3.0 SP3, 4.0

SUMMARY

One of the more difficult tasks when you are attempting to find the root cause of Event 23 "00AF" (link lost) or other network outage errors posted in Application Event logs, is knowing when to stop a Netmon trace after a failure has occurred. Frequently, because of high network traffic, the network incident that spawned the Event 23 or other network outage has been overwritten by the time network personnel have been notified to stop the Netmon trace.

You can use Evtscan.exe to send a pop-up message containing a predefined message within seconds of an Event 23 error to any designated computer(s). The utility can send a message for any event and within a configurable length of time after the event transpires. In addition, a predefined e-mail message can be sent to specific users notifying them to stop the Netmon capture. Because the e-mail message is sent containing known specific strings, other actions can be taken on receipt of that specific text string (for example, paging a particular pager number, forwarding the message, and so forth).

Evtscan.exe is a utility that ships with the Back Office Resource Kit (Part 1) (in the Exchange\Tools\Evtlog directory), and has also shipped with the May 1998 Tech Net CD, on a supplemental CD entitled "BackOffice Resource Kit Utilities, Second Edition" (in the Exchange/Winnt/I386/Admin/Evtlog directory). Evtscan.exe ships as an Exchange utility, but has been recently used in the SNA arena, helping to report network outages (Event 23s) as soon as they are recorded in the Event logs.

MORE INFORMATION

Frequently, when troubleshooting link lost and other intermittent LAN errors, it becomes essential to capture network traces (using Netmon). As the outages are intermittent, prompt identification and notification of the network outage will enable support personnel to stop the network tracing device while the LAN error is still in the trace buffer, and not overwritten.

The EVTSCAN utility can be used to track any event ID that is generated in the event logs on specific computers running Windows NT Server. For the purposes of this article, we will be using Event 23 as an example.

To use EVTSCAN, perform the following steps:

1. Copy the files Evtscan.exe and Evt.cfg to the Winnt\System32\Config directory on the monitoring computer running Windows NT Server or Windows NT Workstation.
   
   The Evt.cfg file contains the instructions EVTSCAN will use when monitoring the event logs. The format of the Evt.cfg file is:

   Event ID; Source Service; Action to take; Screen pop up list; email list; Message to be sent

   The Evtscan utility will monitor the Application log for:
   • An Event 23,
   
   
   
   • Taking no action, (that is not stopping or restarting the service)
   
   
   
   • Sending a screen pop-up message to the machine "SNA Monitor"
   
   
   
   • Sending e-mail to the SNA-Admin alias
   
   
   
   • With the following message " Event 23 has occurred- stop netmon trace immediately"
   
   
   
   The evt.cfg file would be modified to contain only the following string:

   23; SNA Server; ; SNA Monitor; SNA-Admin; Event 23 has occurred- stop netmon trace immediately




2. Ensure that the client is Mapi32-compliant so the mail message function works correctly. The simplest way to ensure the mail message will be sent is to install an Exchange client on the monitoring computer, then start Exchange, and then minimize it.



3. Go to an MS-DOS command prompt and change directories to the \Winnt\system32\config directory. Then start EVTSCAN by typing the following commands:

   evtscan -f <Evt.cfg (in this case)> -u <the Exchange profile to be used(if necessary)> -p <password for the Exchange profile> -t <how many seconds between scans> <Target server to be scanned #1> <Target server to be scanned #2>, and so forth.

   For example, if you have logged into the monitoring computer with your user name and password and have started and minimized Exchange, use the following command string:

   evtscan -f evt.cfg -t 15 SNAServer#1,SNAServer#2,SNAServer#3

   This will bring about the following results:
   • Scanning SNAServer#1, SNAServer#2, and SNAServer#3
   
   
   
   • Every 15 seconds
   
   
   
   • For Event 23s
   
   
   
   • We will send screen pop-up messages to SNA Monitor
   
   
   
   • We will send e-mail to SNA-Admin
   
   
   
   You can then minimize the MS-DOS window under which EVTSCAN is running.



4. After notifications have been sent, and there is no further need to run EVTSCAN, you can exit EVTSCAN by typing the following command:

   ^C (Ctrl+C)

Q155886 How to Make a Network Trace With Network Monitor

Q158744 How to Automate Network Captures With Network Monitor

Q148942 How to Capture Network Traffic With Network Monitor

Additional query words:

Keywords :
Version : WINDOWS:2.11,2.11 SP1,2.11 SP2,3.0,3.0 SP1,3.0 SP2,3.0 SP3,4.0
Platform : WINDOWS
Issue type : kbhowto kbinfo