The information in this article applies to:
SUMMARYLAN SERVER CONNECTION FROM OS/2 2.0's VDMIn a system running LAN Manager 2.2 on the server and LAN Manager 2.2's client for IBM OS/2 2.0, you can initiate connections to the server while running an OS/2 session (for example, with a NET USE command), but not while running in OS/2 2.0's Virtual DOS machine (VDM) or Windows Subsystem. Although a VDM has full access to LAN resources such as network drives, the VDM has no LAN redirector loaded, so it cannot initiate a LAN connection.USE OS/2 LAN REQUESTERTo achieve LAN connectivity from both OS/2 and VDM sessions, use IBM's OS/2 LAN requester. This provides a NetBIOS session in each VDM, upon which the IBM DOS LAN requester may be loaded, allowing NET USE commands to be initiated from the VDM.PROCEDURETo do this in a LAN server environment, load the virtual NetBIOS driver (using OS/2 CONFIG.SYS) to provide NetBIOS support in each VDM. Run SETUPVDD.EXE, which adds the Virtual NetBIOS device driver (LANVDD.OS2) to CONFIG.SYS.Then install the DOS LAN requester (DLR) on each VDM. (Note that there is no requirement for LAN support program.) When the requester is installed, add the entry NET START RDR (with the appropriate command line switches) to the AUTOEXEC.BAT that is executed by the VDM. The virtual NetBIOS driver "talks" to the OS/2 protect mode NetBIOS interface, which in the case of IBM's LAN Server is configured by means of LAPS (LAN Adapter and Protocol Support).
Additional query words: 2.20 2.2
Keywords : kbnetwork |
Last Reviewed: November 9, 1999 © 2000 Microsoft Corporation. All rights reserved. Terms of Use. |