XGEN: README.TXT: Microsoft Exchange 4.0 U.S. Service Pack 2
ID: Q153655
|
The information in this article applies to:
-
Microsoft Exchange Server, version 4.0
SUMMARY
Following is the README.TXT file that accompanies the Microsoft Exchange
Server version 4.0 U.S. Service Pack 2:
MORE INFORMATION
------------------------------------------------------------------------
Microsoft Exchange Server Version 4.0
Service Pack 2
------------------------------------------------------------------------
Contents
1.0 Installing Microsoft Exchange Server 4.0 Service Pack 2
1.1 Introduction
1.2 Installation Instructions for the Microsoft Exchange Client
Service Pack 2
1.3 Installation Instructions for the Microsoft Exchange Server
Service Pack 2
1.4 New Functionality in This Release
1.5 Macintosh Client
1.6 PowerPC Client
1.7 PowerPC Server
1.8 Internet Mail Connector and Macintosh File Attachments
1.9 Internet Mail Connector Supports Dial-up Connections
1.10 Double-byte Character Set (DBCS) Support
1.11 Installing Symbol Files
1.12 Adding and Removing Components from the Microsoft Exchange
Enterprise Edition
1.13 Adding and Removing Components from the Microsoft Exchange
Standard Edition
1.14 Installing ISO TP4/CLNP on Windows NT 3.51
1.15 Installing ISO TP4/CLNP on Windows NT 4.0
1.16 List of Bugs Fixed in Microsoft Exchange Server Service Packs
1.0 Installing Microsoft Exchange Server 4.0 Service Pack 2
1.1 Introduction
This release of Microsoft(R) Exchange Server 4.0 Service Pack 2 is easy to
apply from within Microsoft Windows NT(R) and changes only those files that
were originally set up on the Microsoft Exchange Server system. Service
Pack releases are cumulative. They contain all previous fixes and any new
fixes made to the system.
1.2 Installation Instructions for the Microsoft Exchange Client Service
Pack 2
To install the Service Pack for Microsoft Exchange Client from a compressed
files:
1. Create a CLIENT sub-directory.
2. Download the compressed setup file appropriate for the clients for
your hardware platform directory. Select the appropriate files as
indicated by the following list:
DOS client SP2_40DI.EXE
Eforms Designer Setup SP2_40EF.EXE
ACME Setup SP2_40CS.EXE
STF Editor SP2_40ST.EXE
Client Support Symbols:
Win95 SP2S409I.EXE
Winnt (Alpha) SP2S40NA.EXE
Winnt (Intel) SP2S40NI.EXE
Winnt (MIPS) SP2S40NM.EXE
Winnt (PPC) SP2S40NP.EXE
Windows 16-bit client SP2_40WI.EXE
Windows 95 client SP2_409I.EXE
Winnt (Alpha) SP2_40NA.EXE
Winnt (Intel) SP2_40NI.EXE
Winnt (MIPS) SP2_40NM.EXE
Winnt (PPC) SP2_40NP.EXE
SMS and TPL client files SP2_40SM.EXE
3. At a command prompt, go to the CLIENT directory and type the filename
(downloaded in Step 2) followed by a -d to ensure that the correct
directories are created (Example: SP2_40NA -d).
4. To update a client go to the CLIENT and platform directory, and type
SETUP. Follow the instructions displayed on the screen.
1.3 Installation Instructions for the Microsoft Exchange Server Service
Pack 2
To install the Service Pack for Microsoft Exchange Server from compressed
files:
1. Create two sub-directories, SETUP and SUPPORT.
2. Download the compressed setup file appropriate for your hardware
platform into the SETUP directory. Select the appropriate file as
indicated by the following list:
Alpha AXP(TM): SP2_400A.EXE
Intel(R): SP2_400I.EXE
MIPS(R): SP2_400M.EXE
PowerPC(TM): SP2_400P.EXE
3. Download the compressed support file appropriate for your hardware
platform into the SUPPORT directory. Select the appropriate file as
indicated by the following list:
Alpha AXP(TM): SP2S400A.EXE
Intel(R): SP2S400I.EXE
MIPS(R): SP2S400M.EXE
PowerPC(TM): SP2S400P.EXE
4. At the Windows NT command prompt, go to the SETUP directory and type
the filename (downloaded in Step 2) followed by a -d to ensure that
the correct directories are created (Example: SP2_400A -d).
5. At the Windows NT command prompt, go to the SUPPORT directory and
type the filename (downloaded in Step 3) followed by a -d to ensure
that the correct directories are created (Example: SP2S400A -d).
6. Go to the SETUP directory, and type UPDATE. Follow the instructions
displayed on the screen.
1.4 New Functionality in This Release
This release of Microsoft Exchange Server includes new client support and a
number of new features. These are described below.
1.5 Macintosh Client
Microsoft Exchange Client for the Apple Macintosh adds to the client
platforms available in Microsoft Exchange Server 4.0. The Microsoft
Exchange Client for the Apple Macintosh supports advanced features such as
grouping and filtering in views, discussion databases, auto-signature,
rules, sending/sharing of documents, digital signatures, offline folders,
and access to the Internet through the Internet Mail Connector
1.6 PowerPC Client
Microsoft Exchange Client for Windows NT is also available for the PowerPC
platform.
1.7 PowerPC Server
Microsoft Exchange Server also adds the server software for the PowerPC
platform. With this addition, Microsoft Exchange Server completes its
support for high-end hardware platforms, offering the same advanced
functionality such as security integrated into the network operating
system, use of server operating system monitoring, and backup tools on
Intel and RISC platforms.
1.8 Internet Mail Connector and Macintosh File Attachments
With the release of Microsoft Exchange Server, all file attachments from an
Apple Macintosh will be mapped to MIME-standard bodyparts so that MIME
complaint clients and gateways can decode these attachments. Additionally,
the Internet Mail Connector maps any incoming bodyparts to windows or
Macintosh file types.
1.9 Internet Mail Connector Supports Dial-up Connections
This release enables support of dial-up connections by the Internet Mail
Connector to send/receive messages to Internet service providers over a
telephone connection.
1.9.1 Administrator Permissions Required to Run the Internet Mail
Connector
To administer the Internet Mail Connector, the account under which you are
running the Microsoft Exchange Server Administrator program must have
administrative rights on the computer where the Internet Mail Connector
service is running. This account must be listed as a member of the
Administrators group in the User Manager for that computer. If the account
does not have administrative rights, an error message will be displayed
when you attempt to open the Internet Mail Connector properties, and some
fields will be disabled.
1.9.2 Internet Mail Connector Word Wrap and Text Quoting Registry
Parameters
Two new registry values have been added under the Internet Mail Connector's
Parameters key to provide control over the Internet Mail Connector 's word-
wrap and text quoting behavior. The first, UseRTFText, is a DWORD value
that specifies if reply and forward text will be quoted in outgoing non-
TNEF. If it is enabled (non-zero), Internet style quoting is applied to
reply and forward text by inserting a ">" character before each line. If
UseRTFText is disabled (set to zero or not present), no Internet style
quoting is applied. UseRTFText is enabled by default.
The second new registry value is EnableMIMEWrap. This is a DWORD value that
controls word-wrap in outgoing non-TNEF MIME messages. If it is enabled,
lines in MIME messages are wrapped at a fixed column. If EnableMIMEWrap is
disabled (and UseRTFText is also disabled), lines are wrapped using quoted
printable encoding. MIME enabled readers will unwrap the lines, restoring
the original text flow, but users with non-MIME readers will see a "="
character appended to each wrapped line of text. EnableMIMEWrap is enabled
by default.
Note that UseRTFText also affects word-wrap. If enabled, text lines in all
non-TNEF messages are wrapped at a fixed column, regardless of the setting
of EnableMIMEWrap. The word-wrap setting for non-MIME messages on the
Internet Mail Connector properties in Microsoft Exchange Server
Administrator program is ignored.
1.9.3 Using Internet-style Quoting with List Servers
When the UseRTFText registry parameter is enabled, Internet style quoting
will be applied to forward and reply text in messages. This quoting will
also be applied to text that is cut and pasted from a message into a
compose note. When sending a message with a command to a list server, it is
important to make sure the text is not quoted; otherwise, the list server
will not be able to interpret the command. You can type the command
manually. Alternatively, you can use the Paste Special command to paste the
plain text. Do not paste the formatted text.
1.9.4 Site Address Required to Start the Internet Mail Connector
The Internet Mail Connector determines the domain to use in the originator
address for reports from the site address for its address type. If you set
the address type on the Internet Mail property page of the Internet Mail
Connector properties to a type for which there is no site address, the
Internet Mail Connector will not start.
If you want to set an address type without specifying the site address, you
can modify the registry by adding the value SiteDomain to
SYSTEM\CurrentControlSet\Services\MSExchangeIMC\Parameters. SiteDomain is a
REG_SZ value that should be set to the domain you would like to be used in
the originator address for reports generated by the Internet Mail
Connector.
1.9.5 Sending Imported Messages Using the Internet Mail Connector
Messages that have been imported into Microsoft Exchange with the migration
tools cannot be embedded in messages and sent through the Internet Mail
Connector. The Internet Mail Connector will not be able to process the
embedded message and will generate a non-delivery report (NDR). The problem
will also occur if you try to embed an unsent message into another message
and send it out the Internet Mail Connector.
To work around this problem, cut and paste the contents of the migrated
message or forward it instead of embedding it in another message.
1.9.6 The Microsoft Exchange Server Routing Table
The Internet Mail Connector reads the Microsoft Exchange Server routing
table every 15 minutes to determine its routing responsibilities. The 15-
minute interval is configurable through the Windows NT Registry. It is
recommended that you use this default setting (0xF), but if you need to
modify it, use the following registry key:
SYSTEM\CurrentControlSet\Services\MSExchangeIMC
\Parameters\RouteCalculationInterval
Note Setting this registry value to 0x0 means the Internet Mail Connector
would check the routing table only at startup.
The Internet Mail Connector checks the Last Modified field for the routing
table to determine whether changes have been made. If the Last Modified
time on the routing table is newer than the timestamp on the Route.txt
file, the Internet Mail Connector will update its routing information and
create the Route.txt file in the Exchsrvr\Imcdata\Log directory.
Using the Route.txt File
The Route.txt file contains the current routes that the Internet Mail
Connector will use to determine delivery destinations for connected sites.
This file is not used by the Internet Mail Connector for routing; it's a
text representation of the routes that the Internet Mail Connector is
responsible for.
If changes are made to the routing table, at the next checking interval,
the Internet Mail Connector will copy the existing Route.txt file to
Route.old and update the Route.txt file with the latest changes. The
Internet Mail Connector always reads the routing table at startup.
Troubleshooting a Routing Problem
If the Internet Mail Connector does not route properly, check the following
configuration items:
Check the entries in the Control Panel, Network, TCP/IP, and DNS
configuration. The host name and domain name need to be reachable by other
computers (that is, registered within the DNS or specified in the local
HOSTS file).
Check the Internet Mail Connector Connected Sites property page to ensure
that all entries are correct.
Check the routing table using the Site Addressing object, Routing property
page in the Microsoft Exchange Server Administration program.
Additionally check the following files:
Route.txt: The current routes the Internet Mail Connector services.
Route.old: The previous routing information the Internet Mail Connector
used before it created the new Route.txt file.
Equal Cost Routes and Non-Delivered Mail
If your configuration consists of multiple routes with the same cost for a
destination, the Internet Mail Connector will balance loads between the
different routes. If a route has problems, any queued mail for that
destination will not be rerouted through a different route. If the problems
continue longer than the maximum allowed delivery time-outs, a non-delivery
report will be generated in these cases.
Least Cost Routes
If your configuration contains multiple routes to the same destination with
different costs, the Internet Mail Connector will use only the least cost
route defined. If that link is unavailable due to a communication problem,
the Internet Mail Connector will not use any of the higher cost routes.
Proper configuration of your DNS with MX records can override this behavior
and allow all incoming mail to use a secondary route.
Routing Table Can't Be Read
If the Internet Mail Connector has started and the routing table cannot be
read at the specified checking interval, the Internet Mail Connector will
continue to use its existing routing information. No event is logged in
this case.
Correction to the Administrator's Guide
In the "Using Routing Addresses for Address Space Entries" section in
Chapter 11, The Routing Address tab no longer needs to be used when
connecting two replicated Microsoft Exchange sites. It can be used to send
mail to different organizations that are not replicated.
1.9.7 Maximum Number of Inbound and Outbound Connections
Setting the maximum number of inbound and outbound connections to 0 on the
Connections property page does not stop the Internet Mail Connector from
accepting inbound or attempting outbound connections. To stop both inbound
and outbound connections, set the Transfer Mode to None. To stop inbound
connections, choose Outbound only. To stop outbound connections, choose
Inbound Only.
1.9.8 Removing an Installed Internet Mail Connector
Before removing the Internet Mail Connector, be sure there are no messages
left in the queues awaiting delivery. Follow these steps:
1. On the Connections property page, set the transfer mode to None
(Flush Queues).
2. Set the retry interval for the connector message queues to a short
interval, such as .25 (15 minutes).
3. Set the message time-outs for normal, urgent, and non-urgent mail to
one hour.
4. Restart the Internet Mail Connector.
The Internet Mail Connector will not accept new messages and will continue
to process the messages already in its queues. Non-Delivery Reports (NDRs)
will be generated for any messages that cannot be delivered in one hour
(host unreachable, for example). Check the status of the queues on the
Queues property page. When the queues are empty, shut down the Internet
Mail Connector and begin removing the installation.
1.9.9 Loopback Detection
The Internet Mail Connector will allow configurations where SMTP
connections are made to itself. There are cases where this behavior is
desired, such as when one Microsoft Exchange user addresses another using
an SMTP proxy. However, this can also allow loopbacks and inefficient
configurations. You can configure the Internet Mail Connector so that it
won't initiate SMTP connections if the destination host's IP address
matches its own. Instead, it will create a non-delivery report (NDR) for
the message. To enable the Internet Mail Connector's connection loopback
detection, create the following DWORD registry value and set it equal to 1:
SYSTEM\CurrentControlSet\Services\MSExchangeIMC
\Parameters\DisableLoopbackConnection
1.9.10 Delivery Restrictions for Custom Recipients
Delivery of inbound messages to custom recipients cannot be controlled
using the Delivery Restrictions property page.
1.9.11 Internet Mail Connector Performance Monitor Counters
The Microsoft Exchange Server Performance Monitor Counters for the Internet
Mail Connector described in Chapter 17 of the Administrator's Guide have
changed.
Name Description
Counters for MTS-IN
Queued MTS-IN The number of messages awaiting final
delivery in MS Exchange Server
Bytes Queued MTS-IN The size, in bytes, of the messages that
have been converted from Internet Mail and
are awaiting final delivery within MS
Exchange Server
Messages Entering MTS-IN The number of messages entering the MTS-IN
folder after conversion from Internet Mail
format
Counters for MTS-OUT
Queued MTS-OUT The number of messages waiting to be
converted to Internet Mail format
Bytes Queued MTS-OUT The size, in bytes, of the messages waiting
to be converted to Internet Mail format
Messages Entering MTS-OUT Messages that have entered the Internet Mail
Connector's MTS-OUT folder for conversion to
Internet Mail format
Messages Leaving MTS-OUT The number of messages entering the Outbound
Queue
Associations
Connections Inbound The number of current SMTP connections to
the Internet Mail Connector established by
other SMTP hosts
Connections Outbound The number of current SMTP connections the
Internet Mail Connector has established to
other SMTP hosts
Connections Total Outbound The total number of successful SMTP
connections that the Internet Mail connector
has established since it was started
Connections Total Inbound The total number of SMTP connections the
Internet Mail Connector has accepted from
other hosts since it was started
Connections Total Rejected The total number of SMTP connections that
the Internet Mail Connector has rejected
from other hosts since it was started
Connections Total Failed The total number of SMTP connections the
Internet Mail Connector has attempted to
other hosts that failed since it was started
Internet Queues
Queued Outbound The number of messages from MS Exchange
Server that are queued to be delivered to
the Internet
Queued Inbound The number of messages received from the
Internet destined for MS Exchange Server
Counters for NDRs
NDRs Total Inbound The total number of Non-delivery reports
generated for outbound mail
NDRs Total Outbound The total number of Non-delivery reports
generated for inbound mail
Counters for Messages/Bytes Transferred
Inbound Bytes Total The total size in Bytes transferred into MS
Exchange Server
Outbound Bytes Total The total size in Bytes transferred from MS
Exchange Server
Inbound Messages Total The total number of Internet messages
delivered into MS Exchange Server
Outbound Messages Total The total number of outbound messages
delivered to their destinations
1.9.12 Internet Mail Connector Queues
The "Selecting a Queue" section in Chapter 17 of the Administrator's Guide
has changed.
Option Description
Inbound messages awaiting conversion Incoming messages waiting to be
converted by the connector and
then delivered to the
information store.
Inbound messages awaiting delivery Messages in the MTS-IN folder
in the information store.
Outbound messages awaiting conversion Outgoing messages received from
the MTA and waiting to be
converted by the Internet Mail
Connector. The next destination
is the Out queue.
Outbound messages awaiting delivery Messages queued for delivery in
the Internet Mail Connector's
scheduler, which roughly
corresponds to the message files
in the IMCDATA\OUT directory.
Since some messages require
delivery to multiple hosts,
there will be more entries in
the queue than there are files
in the directory.
1.9.13 Using a Wildcard MX DNS Record
If you are using a wildcard MX DNS record, the Internet Mail Connector will
append the default domain from your TCP/IP configuration to each host name
before trying to resolve it in DNS. To prevent this, create a REG_DWORD
registry value named DisableResolverSearchList under the
SYSTEM\CurrentControlSet\Services\MSExchangeIMC\Parameters key and set its
value to 1. This will stop the Internet Mail Connector from appending a
domain to host names before trying to resolve them.
1.9.14 Using the Internet Mail Connector as a Site Connector
In Chapter 8 (Planning Your Connectors) of the Microsoft Exchange Server
Concepts and Planning Guide, the "Connecting Microsoft Exchange Server
Sites over the Internet" section has changed. The following information
supplements the section and describes steps that can be eliminated.
Step 1: Multiple Internet Mail Connectors in one site is no longer
required.
Step 8: The address space routing address is no longer required. Sites that
can be connected (reached) only through site B (that is, site A has no
direct connection to them) do not need to be added to the Connected Sites
property page on the Internet Mail Connector on site A. The Internet Mail
Connector reads the routing information from the Microsoft Exchange Server
routing table and determines that these sites are routable through site B.
Step 9: You no longer have to add routing addresses for address spaces that
are serviced on other sites that an Internet Mail Connector will connect
to. When sites are replicated, the Internet Mail Connector will access this
information directly.
In addition to the steps in the Concepts and Planning Guide, use the
following steps to connect Site A and Site B:
1. Use the Connected Sites property page on site A to add a new
connected site for site B.
2. Using the Routing Address tab from the Connected Sites property page,
add the routing address for the Internet Mail Connector computer on
site B.
3. Add site A to the Connected Sites property page for the Internet Mail
Connector on site B and use the routing address for site A.
Step 10: It is no longer necessary to define custom recipients in the site
where the Internet Mail Connector servicing the external Internet mail
resides.
1.9.15 Connecting Sites with the Internet Mail Connector
For best performance when connecting sites, configure the Internet Mail
Connector to use MIME encoding. When sending TNEF, the Internet Mail
Connector handles attachments differently when performing MIME encoding
than it does with uuencode. Attachments are transmitted in the TNEF data,
instead of being broken out separately, as they are in uuencoded messages.
Due to the internal design of the Internet Mail Connector, this results in
much better performance in processing TNEF messages. Therefore, to maximize
site replication performance, it is recommended that you use MIME encoding
with TNEF when connecting sites using the Internet Mail Connector.
1.9.16 Do Not Use an Ending Period to Specify an FQDN
When specifying message delivery by domain, a fully qualified domain name
(FQDN) ending with a period (.) is not supported. A non-delivery report
(NDR) specifying "host unreachable" will be generated.
1.9.17 Specifying the Maximum Message Size
The description of the No limit option on the Internet Mail Connector
General property page in the "Specifying the Maximum Message Size" in
Chapter 11 of the Microsoft Exchange Server Administrator's Guide should
read as follows: Send an inbound or outbound message of any size.
1.9.18 Forwarding Outbound Mail to a Host Using Dial-up
The Internet Mail Connector has a default setting that creates up to 10
outbound connections to any particular host and sends up to 8 messages in
any single connection. For performance reasons, you should consider
changing the settings to 1 for outbound connections and to 100 for maximum
messages.
To change these settings:
1. In the Administrator window, choose Connections.
2. Double-click the Internet Mail Connector.
3. Select the Connections tab.
4. Under Transfer Mode, choose Advanced.
5. Change the defaults to the following:
Max no. of Connections to a single host: 1
Max no. of Messages sent in a connection: 100
Note Check with your Internet service provider to make sure the receiving
host can accept 100 messages in a single connection.
1.10 Double-byte Character Set (DBCS) Support
With the release of Microsoft Exchange Server, all versions accept and can
administer all other versions. This includes full support of Far East and
Eastern European character sets.
1.11 Installing Symbol Files
To install Symbol Files from the compact disc:
1. Download the Exchange 4.0 Service Pack 2 appropriate symbol files.
2. Copy the appropriate file to the CLIENT sub-directory and type the
filename followed by a -d to ensure that the correct directories are
created (Example: SP2S409I.EXE).
3. Change to the directory created in the previous step and Run
Setup.bat.
1.12 Adding and Removing Components from the Microsoft Exchange Server
Enterprise Edition
To add or remove components from the Microsoft Exchange Enterprise Edition:
1. Insert the Microsoft Exchange Server 4.0 compact disc into the CD-ROM
drive.
2. At the Windows NT command prompt, change to the CD-ROM drive
3. Change to the <LANGUAGE> directory (depending on whether you are
updating an English, French, or German Microsoft Exchange Server).
3. Switch to the SETUP directory, and then switch to the i386, MIPS or
ALPHA directory (depending upon whether you have an Intel(R),
MIPS(R), Alpha AXP(TM).
4. Run Setup.
5. Choose Add/Remove.
6. Select or deselect components from Change Option, then choose OK.
Choose Continue and then Yes to Add/Remove components.
7. Rerun the section called Installation Instructions for the Microsoft
Exchange Server Service Pack 2.
8. Rerun the section called Installing Symbol Files.
1.13 Adding and Removing Components from the Microsoft Exchange Server
Standard Edition
To add or remove a component from the Microsoft Exchange Standard Edition:
1. Insert the appropriate Microsoft Exchange Connector, X400, SMTP, or
MS Mail disc into the A drive.
2. Run Setup.
3. Choose Typical and then Continue.
4. Rerun the section called Installation Instructions for the Microsoft
Exchange Server Service Pack 2.
5. Rerun the section called Installing Symbol Files.
1.14 Installing ISO TP4/CLNP on Windows NT 3.51
The Service Pack contains an updated ISO TP4/CLNP Protocol. If you have
already installed ISO TP4/CLNP and are upgrading, remove and reinstall the
ISO TP4/CLNP components.
To remove ISO TP4/CLNP:
1. In Control Panel, double-click the Network icon.
2. From Installed Network Software, select ISO TP4/CLNP Protocol, choose
Remove, and then choose Yes.
3. Restart your computer.
The ISO TP4/CLNP files are located in the TP4Setup. Download the compressed
support file SP2_40TP.EXE and type the filename followed by the -d command
to ensure that the correct directories are created (Example: SP2_40TP.EXE -
d). The downloaded file contains the files for all platforms.
To install the new version of ISO TP4/CLNP:
1. In Control Panel, double-click the Network icon.
2. Choose Add Software.
3. From the Network Software list, select ISO TP4/CLNP Stack and then
choose Continue.
4. Type the path to the subdirectory on the subdirectory that contains
your processor type, and then choose Continue.
5. In the Network Settings dialog box, choose OK. (ISO TP4/CLNP Protocol
should appear in the Installed Network Software list.)
6. Choose Close.
7. Select the proper Local Address and NSAP address for your
configuration, and choose OK.
8. Restart the server.
1.15 Installing ISO TP4/CLNP on Windows NT 4.0
The Windows NT 4.0 compact disc contains a new ISO TP4/CLNP Protocol.
If you have already installed ISO TP4/CLNP and are upgrading from Windows
NT 3.51, remove and reinstall the ISO TP4/CLNP components from the Windows
NT 4.0 compact disc. The version of ISO TP4/CLNP that shipped with Windows
NT 3.51 does not work on Windows NT 4.0, and the Windows NT 4.0 upgrade
process does not upgrade the ISO TP4/CLNP components automatically.
To remove ISO TP4/CLNP:
1. In Control Panel, double-click the Network icon.
2. Select the Protocols tab.
3. From the Network Protocols, select ISO TP4/CLNP Stack, and then
choose Remove.
4. Restart your computer.
The ISO TP4/CLNP files are on the compact disc in drvlib\protocol\tp4setup.
The directory path contains subdirectories for the processor type on your
server.
To install the new version of ISO TP4/CLNP:
1. In Control Panel, double-click the Network icon.
2. Select the Protocols tab, and then choose Add.
3. Select Have Disk and type the path to the subdirectory on the compact
disc that contains your processor type.
4. In the Select OEM option dialog box, choose OK. (ISO TP4/CLNP
Protocol should appear in the Network Protocols list.)
5. Choose Close.
6. Select the proper Local Address and NSAP address for your
configuration, and choose OK.
7. Restart the server.
1.16 List of Bugs Fixed in Microsoft Exchange Server Service Packs
Note: Use the Qxxxxxx number that precedes the title of the bug fix to
query the Microsoft Knowledge Base for an article about that bug.
1.16.1 Service Pack 1
Q126497: Limiting the Number of Recipients of a Message
Q135459: Event Error 251: Fatal Internal MTA Error Occurred
Q136786: IMC Sends NDR and OOF Messages to Bulk Mailing Lists
Q136807: MTA Error: Too Many ECBs Processed in One Thread
Q137699: Cannot Send X.400 Delivery Reports Through French ADMD
Q139643: Error Writing Log Information to SA
Q139858: Initial Directory Replication Too Long
Q140338: Directory Crashes with Dr. Watson in DETAILS.C
Q140448: Errors Processing Incoming Replication Messages
Q140974: MTA NDR's Mail with FTBP Attachments from HP Openmail
Q140975: Event ID 4037. An Exception has Occurred...
Q140976: Unable to Start the Association Due to Resource Shortage
Q141135: MSExchangeMSMI NDR Error EventID 2568
Q141970: AT MTA Will Over Utilize CPU When Processing Message Subject
Containing 0xD
Q142257: MTA ERROR: MTA Database XFER-IN Thread
Q142258: MTA Exception Error on Service Shutdown
Q142260: IMC Sends Messages in Rich Text Erroneously
Q142261: IMC Restest Utility Debug Option
Q142262: Display of Public Folder Summary causes Access Violation
Q142266: Cannot Create PC Mail <NET/PO> Style SMTP Proxies via DirSync
Q142916: MTA Stops Making Associations and Generatea a 2171 Error
Q143186: MTA PerfMon Instances limited to 53 Instances
Q143197: IMC Generating Pending Delivery Notification on Queued Read
Receipts
Q143236: Unable to Change Password via Client
Q146473: Attachment with Name of Charset=ISO-2022-JP
Q146509: MTA May Stop with Site Connector Removed
Q146537: DSA Queues Too Many Initial Synchronizes at Startup
Q146567: IMC Leaves Messages with Addresses > 255 Characters in MTS-OUT
Q146598: Messages are Stuck in MTS-OUT
Q147459: IMC Does Not Use the Resent-From Field
Q147521: MTA Crashes with a Large Recipient List
Q147821: Installing Server into Large Existing Site is Slow
Q149579: MTA Error: Database Object Not in Use
1.16.2 Service Pack 2
Q140932: IMC: Resent-from Headers Using Oldest Information
Q140933: SMTP Proxy Address Generated Incorrectly
Q140934: IMC: NDR is Held Until Timeout Period has Expired
Q140935: IMC: Ending 821 Session Prematurely
Q140936: System Attendant Crash During GWART Calculation
Q140937: MTA: Misuse of Activity-discard & -interrupt Reason-code
Q140938: MTA: Incorrect Encoding of Per-recipient-indicator for German
Conformance
Q140939: French Screenshots in German EXCHDOC.HLP
Q140940: IMC: 821 Routing on Email Addresses Causes Delivery Failure
Q140941: Identifying Exportable Client Versions
Q140942: IMC: FWD Rule on IMC Admin Mailbox Causes Message Loop
Q140943: Can't Open Attachments Sent From AppleTalk Mail
Q140944: Dirsync Server Not Processing Addresses with no Address Type
Q140945: MTA: Crash with Error 251
Note: The Readme.txt file is incorrect. The next Q Number should really be
Q140946.
Q145789: Microsoft Mail Interchange Hang During DirSync
Q140947: Store: Number of Active Client Logons Perfmon Counter Doesn't
Work
Q140948: Messages Sent to Public Folder With Reply Rule Through IMC
Disables Rule
Q140949: WFW Exchange Client Can't Fax ASCII Messages Due to Bad Phone
Number
Q140951: DXA Generates Multiple SMTP Proxies For PC Mail Addresses
During Dirsync
Q140952: Exchange Toolbar Buttons Missing After Upgrading from 16 bit to
32 bit Client
Q140953: Fax Gateway NDRs Messages Addressed Using Fax Template
Q140954: Win16 "SETUP /q" Fails to Create a Default Profile
Q140955: Win16 Can't Open Attachments Contained in "MIME\no RTF"
Originated Msgs
Q140956: MTA: Incorrectly Aborts Connection After Legitimate RTSE
Activity
Q140957: MTA: Event ID 9405 Occurs
Q140958: MTA: Incorrect user of Default Dialogue-mode
Q140959: MTA: Incorrect Buffering of X.121 Address for X.25
Q140960: French ADMD doesn't accept Read Receipts from French Exchange
Q140961: Duplicate Entries in PC Mail GAL
Q140962: MSMI: Access Violation when RTF Contains Codepage Change
Q143377: Cannot Open Custom Recipient in Administrator
Q145585: Migrated MS Mail 3.x X400 PAB Entries NDR w/ Bad Address
Note: The Readme.txt file is incorrect. The next line should be deleted.
Q145789: Microsoft Mail Interchange Hang During DirSync
Q145794: 1993 Private Extension Support on Per-Message Envelope
Q146183: Optimizer Deletes EDB*.LOG Files When Given Invalid Path
Q146455: Generated SMTP Addresses for Duplicate Mailboxes
Q146676: DXA Appends 001 to Display Names in the GAL
Q146681: DXA Improperly Appending 001 to Friendly Names in the GAL
Q147245: Dial Up Networking Not Find Mail for PC Networks PO
Q150927: MTA Continuously Dialing RAS Connection
Q152344: Winsock Application Starts When Exchange Client Starts
Q152862: IMC: Specify Host Dialog in Admin Doesn't Keep Changes
Q152863: IMC: Generates Empty Body on S/MIME Messages
Q152864: IMC: Doesn't Handle Multiple Comments in 822 Addresses
Correctly
Q152865: Remote Mail View, "Last Update" Time is not Saved
Q152866: No Command to Import MMF on MIPS or Alpha
Q152867: Backfilling Public Folders is Taking a Long Time
Q152868: Max. Event Log Level for Incoming Replication Crashes Store
Q152869: Store May Crash When Opening Server Replication Status Page
Q152870: Store: Event ID 2024
Q152871: Backfill of Public Folders not Always Deleting Folders when it
Should
Q152872: S+: Err Msg: "Your message could not be sent, the schedule is
being used by someone else"
Q152873: Command Line Migration Fails if Control File does not Contain
FldOwner Entry
Q152874: MTA NDR's All Messages Sent in Year 2000
Q152875: Err Msg: "Failure to Send to Embedded DL with Delivery
Restrictions"
Q152876: MTA Hung After Deletion of X.400 Connectors
Q152877: MTA: Event IDs 1004, 1008, 1198, and 1277 Occurs
Q152878: Perfwiz Setting Maximum # of Concurrent Read Threads Set to
1717986810 for DS
Q152879: S+: Can't Write to Appointments in 1.0 CAL Files
Q152880: Cannot Re-install on a BDC Using a Service Account in the
Domain
Q152881: Sending Encrypted Mail to DL with Hidden Recipients Fails
Q152882: IMC: Leaving Unnecessary Files in Work Directory
Q152883: Selecting 'OK' on IMC Properties Dialog Causes Termination in
German Admin
Q152884: "Can't View Store Instance Page if there are More than 15,000
Public Folders"
Q152885: Problems Copying Public Folder Favorite to the Public Folder
Store
Q152886: Message Tracking Time Stamp is Wrong
Q152887: Poor Admin Performance when you have Thousands of Public
Folders
Q152888: Unable to Upgrade MMF with Extended Characters via Profile
Wizard
Q152889: Body of Encrypted Message not Sent when Storage Limit is Hit
Q152890: KCC Taking over 6 Hours to Complete
Q152891: IMC: User Notifications of Queued Mail Always Contains Every P1
Q152892: Store Reports Network Errors Talking to System Attendant
Q152893: Performance Problem with Schedule+ Free/Busy Folder
Q152894: Store Crashes when Passing more than 32k of Data to the Event
Viewer
Q152895: Unable to Migrate PABs from Appletalk Mail Users
Q152896: MTA: Taking a Long Time to Startup When There are a Lot of
Messages in the Queue
Q152897: MTA: Event IDs 8511 and 8640 Occurs
Q152898: MTA: Access Violation in RPC DMOD
Q152899: MTA: Crash in RPC Security Processing
Q152900: MTA: Event ID 248 Occurs
Q152901: MTA: Event ID 1209 Occurs
Q152902: Schedule+ Hangs Due to Possible Network Problems
Additional query words:
servpack SP2 bug fix qfe compact disc
Keywords : XGEN
Version : winnt:4.0
Platform : winnt
Issue type :