FIX: Incorrect Decimal Data Sent to SQL Server with Remote View

ID: Q176653


The information in this article applies to:
  • Microsoft Visual FoxPro for Windows, versions 3.0, 3.0b, 5.0, 5.0a


SYMPTOMS

When you use Remote Views with the SQL Server ODBC Driver (Sqlsrv32.dll version 2.65.0252, 3.50.0303, or 3.50.0311) to send numeric data containing decimal values to SQL Server tables, incorrect decimal values may be inserted into SQL Server tables.


RESOLUTION

Use another version of the SQL Server ODBC Driver or use SQL pass-through functions.


STATUS

Microsoft is researching this problem and will post new information here in the Microsoft Knowledge Base as it becomes available. This has been corrected in Visual FoxPro 6.0.


MORE INFORMATION

When you access SQL Server tables using a remote view, with Sqlsvr32.dll (versions 2.65.0252, 3.50.0300, 3.50.0303 and 3.50.0311) some decimal values may be rounded down when the TABLEUPDATE() command is issued. This behavior is not observed when accessing SQL Server tables using a remote view with other versions of the SQL Server ODBC driver. This behavior is also not observed when using the SQL pass-through function SQLEXEC().

The list below indicates the version number of the SQL Server ODBC driver distributed with each version of Visual FoxPro:


   Visual FoxPro for Windows 3.0            2.00.1912
   Visual FoxPro for Windows 3.0b           2.50.0126
   Visual FoxPro for Windows 5.0a           2.65.0240 

Steps to Reproduce Behavior

NOTE: This code uses a data source named PUBS that accesses the pubs database supplied with Microsoft SQL Server. You must first create this data source and point it to the pubs database for the code below to work.

Install Sqlsrv32.dll version 2.65.0252 from SQL Server Service Pack 3 or a higher version number. Run the following code:

   SET SAFETY OFF
   LOCAL lcconnstring, lcdatafile, lcsysdbofile, lcviewmame, lcsysdbo
   LOCAL lncounter, lnhandle, lnchecksource
   LOCAL lbsourceexists, lbtableexists, lbconnexists, lbviewexists
   lnhandle = SQLCONNECT('PUBS','SA','')
   lnchecksource=sqltables(lnhandle,'TABLE','sourcetabs')
   SELECT sourcetabs
   SCAN
   IF UPPER(ALLTRIM(table_name))="DBO.TESTAMOUNT"
   lbsourceexists=.T.
   EXIT
   ENDIF
   ENDSCAN
   IF !lbsourceexists
   tmpcommand="CREATE TABLE dbo.TESTAMOUNT (MYKEY CHAR(10),"
   tmpcommand=tmpcommand+" MYAMT NUMERIC(18,4))"
   lnreturnresult=sqlexec(lnhandle,tmpcommand)
   ENDIF
   =sqldisconnect(lnhandle)
   SET EXCLUSIVE ON
   SET MULTILOCKS ON
   lcconnstring    =  "DSN=PUBS;DATABASE=pubs;UID=sa;PWD="
   lcconnname      =   "SQLTEST"
   lcdatafile      =   "TESTAMOUNT"
   lcsysdbofile    =   "dbo."+lcdatafile
   lcviewname      =   lcdatafile+"VIEW"
   lcsysdbo        =   "dbo."+lcdatafile+"."
   lncounter       =   0
   IF !FILE('SQLTEST.DBC')
   CLOSE DATA ALL
   CREATE DATABASE sqltest
   ELSE
   OPEN DATABASE sqltest
   ENDIF
   lntables=ADBOBJECTS(tablenames,'TABLE')
   IF lntables>0
   FOR i=1 TO ALEN(tablenames,1)
   IF UPPER(tablenames[i])=lcdatafile
   lbtableexists=.T.
   EXIT
   ENDIF
   NEXT
   ENDIF
   IF !lbtableexists
   CREATE TABLE testamount ( mykey c(10) , myamt N(18,4) )
   ELSE
   USE (lcdatafile) EXCL
   ZAP
   ENDIF
   lnconnections=ADBOBJECTS(CONNECTS,'CONNECTION')
   IF lnconnections>0
   FOR i=1 TO ALEN(CONNECTS,1)
   IF UPPER(CONNECTS[i])=lcconnname
   lbconnexists=.F.
   EXIT
   ENDIF
   NEXT
   ENDIF
   IF !lbconnexists
   CREATE CONNECTION &lcconnname CONNSTRING (lcconnstring)
   * Set connection properties.
   DBSETPROP('SQLTEST','Connection','Asynchronous', .F.)
   DBSETPROP('SQLTEST','Connection','BatchMode', .T.)
   DBSETPROP('SQLTEST','Connection','Comment', '')
   DBSETPROP('SQLTEST','Connection','DispLogin', 3)
   DBSETPROP('SQLTEST','Connection','ConnectTimeOut', 15)
   DBSETPROP('SQLTEST','Connection','DispWarnings', .T.)
   DBSETPROP('SQLTEST','Connection','IdleTimeOut', 0)
   DBSETPROP('SQLTEST','Connection','QueryTimeOut', 0)
   DBSETPROP('SQLTEST','Connection','Transactions', 2)
   ENDIF
   lnviews=ADBOBJECTS(viewnames,'VIEW')
   IF lnviews>0
   FOR i=1 TO ALEN(viewnames,1)
   IF UPPER(viewnames[i])=UPPER(lcviewname)
   lbviewexists=.T.
   EXIT
   ENDIF
   NEXT
   ENDIF
   IF !lbviewexists
   * Create View.
   CREATE SQL VIEW &lcviewname REMOTE CONNECT 'SQLTEST' SHARE ;
   AS SELECT * ;
   FROM &lcsysdbofile &lcdatafile ;
   ORDER BY &lcdatafile..mykey
   * Set view properties.
   DBSETPROP(lcviewname,'View','SendUpdates',.T.)
   DBSETPROP(lcviewname,'View','UpdateType',1)
   DBSETPROP(lcviewname,'View','WhereType',3)
   DBSETPROP(lcviewname,'View','BatchUpdateCount',1)
   DBSETPROP(lcviewname,'View','UseMemoSize',255)
   DBSETPROP(lcviewname,'View','FetchSize',100)
   DBSETPROP(lcviewname,'View','MaxRecords',-1)
   DBSETPROP(lcviewname,'View','Tables','dbo.'+lcdatafile)
   DBSETPROP(lcviewname,'View','Prepared',.F.)
   DBSETPROP(lcviewname,'View','FetchMemo',.F.)
   DBSETPROP(lcviewname,'View','CompareMemo',.F.)
   DBSETPROP(lcviewname,'View','FetchAsNeeded',.F.)
   DBSETPROP(lcviewname,'View','FetchSize',100)
   DBSETPROP(lcviewname,'View','Comment',"")
   DBSETPROP(lcviewname,'View','ShareConnection',.T.)
   * Set Key and Updateable fields.
   DBSETPROP(lcviewname+'.mykey','Field','KeyField',.T.)
   DBSETPROP(lcviewname+'.mykey','Field','Updatable',.T.)
   DBSETPROP(lcviewname+'.mykey','Field','UpdateName',lcsysdbo+'myKEY')
   DBSETPROP(lcviewname+'.mykey','Field','DataType',"C(12)")
   DBSETPROP(lcviewname+'.myamt','Field','KeyField',.F.)
   DBSETPROP(lcviewname+'.myamt','Field','Updatable',.T.)
   DBSETPROP(lcviewname+'.myamt','Field','UpdateName',lcsysdbo+'myamt')
   DBSETPROP(lcviewname+'.myamt','Field','DataType',"N(15,2)")
   * Open view and delete previous test records.
   ENDIF
   USE (lcviewname) ALIAS (lcviewname) IN 0
   SELECT (lcviewname)
   DELETE FROM &lcviewname
   REQUERY()
   * Start buffering and create test records.
   IF !USED(lcdatafile)
   USE (lcdatafile) IN 0
   ENDIF
   SELECT (lcdatafile)
   IF CURSORGETPROP("Buffering",lcdatafile)<>5
   CURSORSETPROP("Buffering",5,lcdatafile)
   ENDIF
   FOR lncounter = 1 TO 100
   m.nnumber = lncounter/100
   m.cmykey = PADL(ALLTRIM(STR(lncounter,10,0)),FSIZE("MYKEY") , '0')
   INSERT INTO testamount (mykey,myamt ) VALUES (m.cmykey,m.nnumber )
   NEXT
   TABLEUPDATE(.T.)
   * Copy to test records to View and SQL Server.
   IF !USED(lcviewname)
   USE (lcviewname)
   ENDIF
   SELECT (lcviewname)
   SCATTER MEMVAR MEMO BLANK
   SELECT (lcdatafile)
   GO TOP
   SCAN
   SELECT (lcdatafile)
   SCATTER MEMVAR MEMO
   SELECT (lcviewname)
   APPEND BLANK
   GATHER MEMVAR MEMO
   SELECT (lcdatafile)
   ENDSCAN
   SELECT (lcviewname)
   TABLEUPDATE(.T.)
   SELECT (lcdatafile)
   GO TOP
   SELECT (lcviewname)
   REQUERY()
   * Show Results in Browse Windows.
   DEFINE WINDOW BROWSER FROM 0,0 TO 50,40 IN SCREEN CLOSE ;
   FLOAT GROW MINIMIZE ZOOM
   SELECT (lcdatafile)
   GO TOP
   BROWSE WINDOW BROWSER NOWAIT
   SELECT (lcviewname)
   REQUERY()
   GO TOP
   MOVE WINDOW BROWSER BY 0,60
   BROWSE WINDOW BROWSER NOWAIT
   RELEASE WINDOW BROWSER
   CURSORSETPROP("Buffering",1,lcdatafile) 

Additional query words:

Keywords : kbVFp kbVFp600fix FxinteropOdbc FxprgSql
Version : WINDOWS:3.0,3.0b,5.0,5.0a
Platform : WINDOWS
Issue type : kbprb


Last Reviewed: August 5, 1999
© 2000 Microsoft Corporation. All rights reserved. Terms of Use.