HOWTO: Using OLE Drag & Drop to Move Controls on a Form

ID: Q184386

The information in this article applies to:
  • Microsoft Visual FoxPro for Windows, version 6.0

SUMMARY

In Visual FoxPro version 5.0, Drag and Drop could be used to move Visual FoxPro controls around on a form. This feature is still available in Visual FoxPro 6.0; however, the new OLE Drag and Drop features may be used to accomplish this. This article provides the steps to set up the OLE Drag and Drop properties and methods to help a programmer get started using OLE Drag and Drop to move controls around on a form.

The article does not cover the background for OLE Drag and Drop. For more information on OLE Drag and Drop, see Chapter 31, "Interoperability and the Internet" in the Microsoft Visual FoxPro "Programmer's Guide," version 6.0.


MORE INFORMATION

Follow the steps below to create a form with some Visual FoxPro controls that can be moved around the form using the OLE Drag and Drop feature.

  1. Create a new form.


  2. Add a command button, label and a text box to the form.


  3. Set the OLEDropMode property of the form to 1 - Enabled.


  4. Add the following code to the OLEDragOver event of the form. Note that the LPARAMETERS line should already be in the event code by default. 
    
      LPARAMETERS oDataObject,nEffect,nButton,nShift,nXCoord,nYCoord,nState
      IF nState=0
         IF oDataObject.GetFormat('VFP Source Object')
            This.OLEDropHasData=1
            This.OLEDropEffects=2
          ENDIF
      ENDIF


  5. Add the following code to the OLDDragDrop event of the form. Note that the LPARAMETERS line should already be in the event code by default. 
    
      LPARAMETERS oDataObject,nEffect,nButton,nShift,nXCoord,nYCoord
      NODEFAULT
      LOCAL oSource
      IF oDataObject.GetFormat('VFP Source Object')
         oSource=oDataObject.GetData('VFP Source Object')
         oSource.Left=nXCoord
         oSource.Top=nYCoord
      ENDIF


  6. Set the following property of the command button, text box and the label: 
    
      OLEDragMode = 1 - Automatic


  7. Set the Caption properties of the label and command button and the Value property of the text box as desired.


  8. Save and run the form.


  9. Drag the controls around by clicking them with the left or right mouse button, holding the mouse button down and dragging. Notice that the tip of the mouse pointer is where the top, left corner of the control will be placed when the mouse button is released. In order to move the text box, drag the mouse to select blank space or select some text that has been entered. Then drag with the highlighted selection.


  10. Once the form is successfully run and the dragging and dropping of the controls is working, try making this change. Remark out the NODEFAULT command in the OLEDragDrop event code of the form as entered in step 5 above.


  11. Save and run the form again. Drag one of the controls with the right mouse button. When the control is dropped in the new location, a short- cut context menu appears with the options of Move Here and Cancel. Choose either one as it makes no difference at this point.


  12. Now try changing the This.OLEDropEffects=2 line in the OLEDragOver event of the form as shown in step 4 above. Try the different values listed below. For each setting, run the form and drag a control with the right mouse. Notice how the menu changes. Try holding down the control key while dragging. 
    
      This.OLEDropEffects=1       Copy Here and Cancel menu
      This.OLEDropEffects=2       Move Here and Cancel menu
      This.OLEDropEffects=3       Copy Here, Move Here and Cancel menu
      This.OLEDropEffects=4       Link Here and Cancel menu
      This.OLEDropEffects=6       Move Here, Link Here and Cancel menu
      This.OLEDropEffects=7       Move Here, Copy Here, Link Here and
                                     Cancel menu
    OLEDropEffects of 1 (copy), 2 (move) and 4 (link) along with 0 (none) are the base drop effect values. The base values can be added together to produce combinations - 3, 6 and 7. The NODEFAULT keyword in the OLEDragDrop event code is used to suppress the menu when right dragging.

    Further use of OLEDropEffects and the default menu that appears when right dragging is beyond the scope of this article. The information above is intended to be an introduction.


A brief explanation of the code in the steps above follows. For more in- depth information, please refer to the articles listed in the REFERENCES section.

First, the OLEDragMode properties of the controls on the form were set to 1 - Automatic. This allows the different data types that each control supports to be placed into the Data Object automatically. When the controls were dragged over the form, the Data Object was queried to see if the 'VFP Source Object' data format was in the Data Object. The 'VFP Source Object' data type was needed to move the controls on the form. Once this data type was found with the OLEDragOver event, the form was told that there was matching data in the Data Object (This.OLEDropHasData=1) and what different drop effects were supported (This.OLEDropEffects=2). Then when the mouse button was released, the OLEDragDrop event checked the Data Object again for the desired format. Once found, the data in the matching format was obtained from the Data Object (oSource=oDataObject.GetData()) by creating an object reference to the control that was stored in the oSource variable in the OLEDragDrop event. The coordinates of the mouse that were passed to the OLEDragDrop event were used to set the Top and Left properties of the control.


REFERENCES

Microsoft Visual FoxPro Programmer's Guide, version 6.0, Chapter 31, "Interoperability and the Internet".

Visual FoxPro Help, 6.0; search on "OLE Drag and Drop"

Additional query words: FxprgClassoop kbvfp600

Keywords : FxprgClassoop
Version : WINDOWS:6.0
Platform : WINDOWS
Issue type : kbhowto


Last Reviewed: August 12, 1999
© 2000 Microsoft Corporation. All rights reserved. Terms of Use.