H/PC Explorer Backup or Restore May Cause Computer to Hang

ID: Q159743


The information in this article applies to:
  • Microsoft Windows CE version 1.0 for the Handheld PC


SYMPTOMS

When you attempt to use the Backup or Restore tools included with H/PC Explorer, your computer may stop responding (hang.) The other H/PC Explorer components, such as synchronization or file transfers, may run successfully.


CAUSE

This behavior can be caused by IRQ conflicts. Your computer may hang only during a Backup or Restore operation because these are longer operations than in other H/PC Explorer features and tools.

Most computers do not support having two devices using the same IRQ at the same time. If your serial cable is plugged into COM2, and your internal modem is configured for COM4, you have an IRQ hardware conflict.


RESOLUTION

To resolve hardware conflicts, you must adjust your hardware settings. Using another serial port on the computer that does not result in a conflict may be the easiest solution. You may need to contact your hard- ware manufacturer for instructions on how to reconfigure your hardware settings to eliminate conflicts.

Additional query words: hand held locks freezes interrupt

Keywords : kbtool wince
Version : WINDOWS:1.0
Platform : WINDOWS
Issue type :


Last Reviewed: September 3, 1999
© 2000 Microsoft Corporation. All rights reserved. Terms of Use.