Microsoft Home IntelliPoint 1.0a README.TXT
ID: Q124190
|
The information in this article applies to:
-
Microsoft IntelliPoint software versions 1.0, 1.0a
SUMMARY
This article contains the complete text of the Microsoft IntelliPoint
Software Home Edition version 1.0 README.TXT file, which is located on Disk
1.
MORE INFORMATION
MICROSOFT HOME MOUSE WITH INTELLIPOINT SOFTWARE
HOME EDITION VERSION 1.0
RELEASE NOTES
Copyright (C) Microsoft Corp. 1994
This document contains information that supplements the Microsoft Mouse
Quick Reference Booklet and accompanying software. The Microsoft
IntelliPoint software is designed for use with the Microsoft Mouse,
BallPoint and licensed Microsoft Mouse compatible pointing devices.
To view best on-screen in Windows Notepad, maximize the Notepad window and
turn on Word Wrap (if it's not already on). To activate Word Wrap, select
the Edit menu and choose Word Wrap. For best printed results, open this
document in Windows Write, Microsoft Word, or another word processing
application, select the entire document and format the text in 10 point
Courier before printing.
Tip: To quickly find any section of this README, use your word processing
application's Search command.
CONTENTS
I. The Microsoft IntelliPoint Setup Program
1. Modifications Made by Setup
2. Returning Your System to Pre-Setup Condition
3. Setting up to a Floppy Disk System
4. If you boot from a Floppy Disk
5. Loading MOUSE.EXE into Upper Memory
II. The MOUSEPWR Feature
III. Using Command-Line Switches in MS-DOS
IV. Notes on IntelliPoint Tools & Controls Features
1. MS-DOS and Windows Features
2. Trails
V. Other Issues
1. Hot Keys on LCD Screens
2. Large and Medium Pointers
3. Using MS-DOS Disk Caching software during Setup
4. Detecting PS/2 pointing devices
_________________________________________________________________
I. THE MICROSOFT INTELLIPOINT SETUP PROGRAM
1. Modifications to Your System
The following changes are made to your system if you set up the
software using all the default conditions during the IntelliPoint
Setup program (default directory is c:\msinput). Future installations
of Microsoft input devices will be installed to the msinput directory.
a. For the mouse driver in MS-DOS, Setup makes the following changes:
1. Installs or modifies lines similar to the following in
AUTOEXEC.BAT:
SET MSINPUT=C:\MSINPUT
C:\MSINPUT\MOUSE\MOUSE.EXE /Q
2. Removes the following line (if it exists) from CONFIG.SYS:
device=c:\mouse.sys
b. For the mouse driver in Windows, Setup makes the following changes:
1. Adds the following line to the load line in WIN.INI:
[windows] section load=c:\msinput\pointer.exe
2. Modifies the following lines in SYSTEM.INI:
[boot] section mouse.drv=c:\msinput\msinput.drv
[boot.description] section mouse.drv=Microsoft IntelliPoint
version 1.0
[386enh] section keyboard=c:\msinput\msinput.386
3. Adds a group to PROGMAN.INI:
groupN=c:\windows\MicrosoX.grp
(where N = next available group number, and where X = next
available letter or number)
4. Setup updates to the latest CTL3DV2.DLL file to the Windows
System directory (if it's not already there).
2. Returning Your System to Pre-Setup Condition
To return your system to its previous condition before you
ran the mouse Setup program, make the following modifications:
a. If there are no other Microsoft input devices installed,
then remove the following information from the load= line in
the WIN.INI:
c:\msinput\pointer.exe
Do not remove this value or any other values for this setting if
there are other Microsoft input devices installed (such as the
Microsoft Natural Keyboard).
b. Change the following lines in SYSTEM.INI to read:
[boot] section mouse.drv=mouse.drv
[boot.description] section mouse.drv=Microsoft, or IBM PS/2
c. If there are no other Microsoft input devices installed, edit
the following value in the SYSTEM.INI file so it reads:
[386enh] section keyboard=*vkd
3. Setting up with a Floppy Disk System
IntelliPoint windows Setup supports only hard disk systems. MS-DOS
setup supports both hard disk systems and floppy disk systems with
two drives. If you are installing files onto a floppy disk system that
has only one drive, you must decompress and copy the files manually.
EXPAND.EXE, a file-decompression program, is provided on the Setup disk
for this purpose.
To install using a single-drive floppy disk system:
a. Insert the Setup disk into drive A: and type:
expand mouse.ex_ b:mouse.exe
b. When prompted by MS-DOS, remove the Setup disk and insert
your destination disk.
c. Reinsert the Setup disk in the drive and type:
expand mousecpl.ex_ b:mousecpl.exe
d. When prompted by MS-DOS, remove the Setup disk and
insert your destination disk.
To load your mouse driver, type:
mouse
Run IntelliPoint Tools & Controls to set pointer options, if desired.
To run IntelliPoint Tools & Controls, type:
mousecpl
If you install the MS-DOS software using a dual floppy disk system,
set up from drive B: to drive A:.
4. If you boot from a Floppy Disk
When you install IntelliPoint software, Setup modifies the AUTOEXEC.BAT
file located on your default hard drive (normally C:). If you boot
Microsoft Windows from a floppy disk, you will have to copy the two
lines of information that were added to the AUTOEXEC.BAT file located
on your boot disk manually. The two lines are:
SET MSINPUT=C:\MSINPUT
C:\MSINPUT\MOUSE\MOUSE.EXE /Q
(The target directory will be different if you installed IntelliPoint
software in a different directory.)
5. Loading MOUSE.EXE into Upper Memory
The MS-DOS mouse driver automatically loads itself into
upper memory, if available. Using the MS-DOS loadhigh command
may cause your mouse software to load into low memory.
_________________________________________________________________
II. THE MOUSEPWR FEATURE
Some laptop computers have the capability to go into a sleep mode to
conserve power when not being used. Choose the MOUSEPWR feature in Custom
Setup if your mouse becomes erratic after you resume from sleep mode.
MOUSEPWR restores pre-sleep mode settings of the mouse when you resume work
on the laptop.
It's not necessary to use MOUSEPWR if your system has Advanced Power
Management (APM). However, this feature requires very little memory (928
bytes) and won't conflict with APM if both are loaded on your system.
____________________________________________________________________
III. USING COMMAND-LINE SWITCHES IN MS-DOS
If you are using the MS-DOS version of the software, you can type
mouse.exe /?
at the prompt to see a list of available switches.
____________________________________________________________________
IV. NOTES ON INTELLIPOINT TOOLS & CONTROLS FEATURES
1. MS-DOS and Windows Features
When you choose Set Buttons, Pointer Speed, Acceleration,
and Orientation from IntelliPoint Tools & Controls in Windows, the
changes do not affect the MS-DOS driver until you reboot your computer.
However, if you set these features from the IntelliPoint Tools &
Controls in MS-DOS, the changes affect both MS-DOS and Windows.
2. Trails
You can not adjust the length of Pointer Trails for Paletized
video drivers through IntelliPoint Tools & Controls.
If Pointer Trails is unavailable, it is because your video driver
does not support this feature.
_____________________________________________________________________
V. OTHER ISSUES
1. Hot Keys on LCD Screens
On some LCD screens, some of the hot keys may not appear or are
not highlighted.
2. Large and Medium Pointers
When using a large or medium sized pointer, some MS-DOS
applications may not redraw the pointer correctly, resulting
in "mouse droppings."
When using a large or medium sized pointer, pointers in some
applications may be distorted. This is due to the method
used to enlarge the pointer.
3. Using MS-DOS Disk Caching software during Setup
If you use an MS-DOS disk cache software other than Microsoft
SMARTDrive, don't choose Reboot after completing Setup. Choose Exit,
then exit Windows and reboot your machine manually.
Some DOS disk caching programs use a write behind caching technique.
If the cache isn't flushed before rebooting, disk errors could occur.
4. Detecting PS/2 pointing devices
Some hardware systems may have a hidden Extended BIOS for PS/2 devices
(some AST machines for instance). To install the IntelliPoint drivers
correctly on these machines, add the following line to the [Mouse]
section of the MSINPUT.INI file.
FailIfNoExtendedBIOS=FALSE
Additional query words:
1.00 redme read intllpoint intelipoint intellpnt
Keywords :
Version : 1.00
Platform : WINDOWS
Issue type :