"Interrupt Jumper Missing" Error Message
ID: Q38754
|
The information in this article applies to:
-
Microsoft Mouse driver for MS-DOS, versions 6.x, 7.x, 8.x
-
Microsoft Bus Mouse, version 1.0
SUMMARY
When you install the Microsoft Mouse Driver and the Microsoft Bus Mouse,
you may receive the following error message:
Interrupt jumper missing
This error can be caused by any of the following;
- The interrupt selected on the J4 jumper is conflicting with existing
hardware. If the IRQ vector is being used by anything else, this
message appears.
- The J2 jumper on slot 8 is not set to normal (as it should be).
- The interface card is defective. This can only be verified by
installing the mouse and software on another machine and testing the
mouse.
Additional query words:
8.00 8.10 8.20 bus mouse errmsg
Keywords :
Version : MS-DOS:6.x,7.x,8.x; :1.0
Platform : MS-DOS
Issue type :
|