DBLSPACE.INI File Settings

ID: q100536

The information in this article applies to:

Microsoft MS-DOS operating system versions 6.0, 6.2, 6.22
Microsoft Windows 95
Microsoft Plus! for Windows 95
Microsoft Windows 98
Microsoft Windows 98 Second Edition

SUMMARY

This information applies to both Microsoft DoubleSpace and Microsoft DriveSpace. For MS-DOS 6.22 and Windows 95, use DRVSPACE in place of DBLSPACE for commands and filenames.

The DBLSPACE.INI file is a text file with Read-Only, Hidden, and System attributes. DoubleSpace stores this file in the root directory of your startup drive (either C or the host drive for C).

The DBLSPACE.INI file contains variables that DoubleSpace uses when your computer starts. Although you can change these variables yourself, you should do so only if you understand what they do and what the results of your changes may be. When possible, you should let DoubleSpace change the DBLSPACE.INI file for you.

NOTE: Before changing the DBLSPACE.INI file, be sure to make a backup copy of the file.

The DBLSPACE.INI file may contain any of the following variables:


   MaxRemovableDrives=n
   FirstDrive=X
   LastDrive=Y
   MaxFileFragments=n
   ActivateDrive=X,Yn


   Automount=0|1|A...Z           (MS-DOS 6.2 and Windows 95)
   DoubleGuard=0|1               (MS-DOS 6.2 Only)
   RomServer=0|1                 (MS-DOS 6.2 Only)
   Switches=/F|/N/FN             (MS-DOS 6.2 Only)

These variables are described more fully in the following paragraphs.

MORE INFORMATION

MaxRemovableDrives=n

This specifies how many additional drives DoubleSpace should allocate memory for when your computer starts. DoubleSpace allocates a small amount of memory for each additional drive. This variable determines how many additional compressed drives you can create or mount without restarting your computer.

To change this setting in versions up to MS-DOS 6.2, start DBLSPACE and choose Options from the Tools Menu. The MaxRemovableDrives setting corresponds to the "Number of removable media drives" option.

To change this setting in later versions, edit the DBLSPACE.INI or DRVSPACE.INI file with a text editor.

FirstDrive=X

This specifies the lowest drive letter available for use by DoubleSpace. FirstDrive is set by DBLSPACE.EXE each time it modifies the DBLSPACE.INI file. Do not change the FirstDrive variable yourself.

LastDrive=Y

This specifies the highest drive letter available for use by DoubleSpace. DoubleSpace assigns drive letters starting at LastDrive and works back to FirstDrive.

NOTE: If another program uses one of the drive letters specified for DoubleSpace, the highest drive letter available to DoubleSpace will be higher than LastDrive.

WARNING: If you change the DBLSPACE.INI file, do not set FirstDrive to a letter used by a physical or logical drive (such as drive C). Also, do not set LastDrive and FirstDrive more than 13 letters apart.

To change this setting in versions up to MS-DOS 6.2, run DBLSPACE and choose Options from the Tools Menu. The LastDrive setting corresponds to the "Last drive reserved for DoubleSpace's use" option.

To change this setting in later versions, edit the DBLSPACE.INI or DRVSPACE.INI file with a text editor.

MaxFileFragments=n

This value is set by DoubleSpace to specify the degree of fragmentation to allow in all mounted compressed volume files (CVFs). After DoubleSpace is installed, the MaxFileFragments setting is changed to reflect the new number of file fragments in all CVFs each time a CVF is changed (deleted, mounted, or resized). The new value is the sum of file fragments in all mounted CVFs plus 110.

For example, if the CVF on drive C has 6 fragments, and the CVF on drive D has 3 fragments, then MaxFileFragments=119 (110+6+3). The new value is used to allocate memory the next time a CVF is mounted. Changes to DBLSPACE.INI that effect memory allocation take effect after you restart your computer.

To change this setting, you must edit the DBLSPACE.INI file. However, with MS-DOS 6.2 you can use the "DBLSPACE /MAXFILEFRAGMENTS=" command.

NOTE: The initial MaxFileFragments setting (2600 for MS-DOS 6.0, or 10000 for MS-DOS 6.2) and the number added when a CVF is changed (110) are both read from the DBLSPACE.INF file. (Note that this information does not apply to Windows 95.)

WARNING: If you decrease the MaxFileFragments setting, DoubleSpace may not be able to mount your compressed drives.

ActivateDrive=X,Yn

This specifies a CVF that DoubleSpace should mount automatically when your computer starts. The DBLSPACE.INI file can contain as many ActivateDrive lines as there are CVFs but only the first 15 ActivateDrive lines are processed by DoubleSpace.

To change the ActivateDrive line, edit the DBLSPACE.INI file. However, with MS-DOS 6.2, you can use the DBLSPACE /HOST command.

DoubleSpace uses the X,Y, and n parameters to determine which CVF to mount and how to assign drive letters. The way these parameters are used depends on whether the specified CVF was created by compressing existing files or created using free space on a drive, or if both types of CVFs exist on the same drive.

The three options are explained below.

CVF Created by Compressing Existing Files

If the specified CVF was created by compressing existing files, the CVF name is DBLSPACE.000. In this case, DoubleSpace uses the parameters for the ActivateDrive variable as follows:

X specifies the drive letter assigned to the uncompressed (host) drive where the CVF is stored after it is mounted. This is the newly created drive letter.

Y specifies the drive letter assigned to the compressed drive.

n specifies the filename extension of the DBLSPACE.00n CVF file, which is 0 in this case.

For example, "ActivateDrive=H,C0" indicates that the CVF filename is DBLSPACE.000. When mounted, the CVF is assigned drive letter C, and the uncompressed (host) drive (which contains the CVF after startup) is assigned drive letter H. If the CVF is unmounted, the CVF exists on drive C, and drive H does not exist.

CVF Created by Compressing Free Space

If the specified CVF was created by compressing free space on an existing drive, the CVF filename is DBLSPACE.001 for the first drive created, DBLSPACE.002 for the second drive created, and so on. In this case, DoubleSpace uses the parameters for the ActivateDrive variable as follows:

X specifies the drive letter assigned to the compressed drive. This is the newly created drive letter.

Y specifies the drive letter assigned to the uncompressed (host) drive.

n specifies the filename extension of the DBLSPACE.00n CVF file, which is set to 1 for the first Create New CVF, 2 for the second Create New CVF, and so on.

For example, "ActivateDrive=G,D2" indicates that the CVF filename is DBLSPACE.002 (the second CVF created by compressing free space). When mounted, the CVF is assigned drive letter G; the uncompressed (host) drive (which contains the CVF before and after startup) is assigned drive letter D. If not mounted, the CVF exists on drive D, and drive G does not exist.

Both Types of CVFs on the Same Drive

If the specified CVF was created by compressing free space on an MS-DOS drive that also contains a DBLSPACE.000 CVF (created by compressing existing files), the CVF filename is the same as noted above (DBLSPACE.001, DBLSPACE.002, and so on), but DoubleSpace uses the parameters for the ActivateDrive statement differently. It doesn't matter which CVF was created first.

X specifies the drive letter assigned to the compressed drive. This is the newly created drive letter.

Y specifies the drive letter of the DBLSPACE.000 CVF, when mounted, on the same MS-DOS drive. If DBLSPACE.000 is not mounted, this is the drive letter where both the DBLSPACE.000 CVF and the DBLSPACE.00n Create New CVF are stored.

n specifies the filename extension of the DBLSPACE.00n CVF file, which is set to 1 for the DBLSPACE.001, 2 for DBLSPACE.002, and so on.

AutoMount=0|1|A...Z (MS-DOS 6.2, Windows 95)

Enables or disables the automatic mounting of removable drives, including floppy disk drives. By default, DoubleSpace automatically mounts all removable drives (AutoMount=1) and no entries are required in the DBLSPACE.INI file. DoubleSpace consumes 4K of additional memory with this setting enabled.

To disable this setting, you must edit the DBLSPACE.INI file. However, in MS-DOS versions you can use the DBLSPACE /AUTOMOUNT=0 command.

DoubleGuard=0|1 (MS-DOS 6.2 Only)

This setting enables or disables DoubleGuard (tm) safety checking. When DoubleGuard is enabled, DoubleSpace will constantly check its memory for damage by some other program. By default, DoubleGuard is enabled (DoubleGuard=1) and no entries are required in the DBLSPACE.INI file.

To disable this setting, type DBLSPACE /DOUBLEGUARD=0 at the MS-DOS command prompt.

NOTE: DoubleSpace's DoubleGuard safety-checking feature detects when another program has violated DoubleSpace's memory, and immediately shuts down your computer to minimize the chance of data loss. If further disk activity were to occur, you could lose some or all of the data on your drive since the data DoubleSpace has in memory is probably invalid due to damage by the other program. Therefore, Microsoft recommends that you do not disable DoubleGuard.

RomServer=0|1 (MS-DOS 6.2 Only)

This setting enables or disables the check for a ROM BIOS Microsoft Real- time Compression Interface (MRCI) server. By default, the ROM MRCI check is disabled (RomServer=0) and no entries are required in the DBLSPACE.INI file.

To enable this setting, type DBLSPACE /ROMSERVER=1 at the command prompt.

NOTE: You should not enable the ROM MRCI check unless you are certain that your hardware supports this feature. Contact your hardware manufacturer for more information.

Switches=/F|/N|/FN (MS-DOS 6.2 Only)

Controls the way the CTRL+F5 and CTRL+F8 keys work. Normally, you can press CTRL+F5 or CTRL+F8 to bypass DoubleSpace when your computer starts and no entries are required in the DBLSPACE.INI file.

For more information on this setting and how to change it, type HELP DBLSPACE /SWITCHES at the command prompt.

Editing the DBLSPACE.INI File

To edit the DBLSPACE.INI file:

Use the ATTRIB command to remove the Read-Only, System, and Hidden attributes on the DBLSPACE.INI file. For example, type attrib -s -h -r h:\dblspace.ini at the MS-DOS command prompt and then press ENTER.

Use a text editor, such as MS-DOS Editor, to edit the DBLSPACE.INI file.

NOTE: The DBLSPACE.INI file may be modified by DoubleSpace when you restart your computer or anytime you run DoubleSpace to change a CVF. For more information on how DoubleSpace modifies the DBLSPACE.INI file, query on the following words in the Microsoft Knowledge Base:

dblspace.exe and dblspace.ini and modify and settings

REFERENCES

"Microsoft MS-DOS 6 Technical Reference," "MS-DOS 6 DoubleSpace Files and Their Functions: DBLSPACE.INI," pages 19-21

Microsoft Windows 95 Resource Kit

Additional query words: dblguard 6.00 6.20 6.22

Keywords : winplus msdos win95
Version : MS-DOS:6.0,6.2,6.22; WINDOWS:95
Platform : MS-DOS WINDOWS
Issue type :