TCP/IP Name Resolution
ID: q108295
|
The information in this article applies to:
-
Microsoft Windows NT operating system version 3.1
-
Microsoft Windows NT Advanced Server
SUMMARY
TCP\IP under Windows NT allows a computer to communicate over a network
with another computer by using either an IP address, a host name, or a
NetBIOS name. However, when one computer attempts to communicate with
another computer using one of these three naming conventions, that name
must ultimately be resolved to a hardware address. The following are the
steps used by TCP\IP to resolve a host name and a NetBIOS name to a
hardware address.
MORE INFORMATIONHost Name Resolution Using a Hosts File
- Computer A enters a command using the host name of Computer B.
- The HOSTS file on Computer A (contained in the
%SystemRoot%\system32\drivers\etc directory ) is parsed. When the host
name of Computer B is found, it is resolved to an IP address.
- The Address Resolution Protocol (ARP) is then used to resolve the IP
address of Computer B to its hardware address. If Computer B is on the
local network, its hardware address will be obtained by using the ARP
cache or by sending a local broadcast asking for a reply from Computer B
with its hardware address. If Computer B is on a remote network, ARP
will determine the hardware address of the default gateway for routing
to Computer B.
NOTE: Host name resolution using a Domain Name Server (DNS) is similar to
the steps outlined above. Instead of parsing the HOSTS file in Step 2, the
DNS looks up the host name of Computer B in its database and resolves it to
an IP address.
NetBIOS Name Resolution
- Computer A enters a Windows NT command using the NetBIOS name of
Computer B.
- The NetBIOS name cache on Computer A is checked for the IP address that
corresponds to the NetBIOS name of Computer B.
- If the IP address of Computer B is found in the NetBIOS name cache, ARP
will resolve the IP address to Computer B's hardware address (see Step 3
of the Host Name Resolution Using A Hosts File section above). If,
however, the NetBIOS name is not resolved from the NetBIOS name cache,
Computer A broadcasts a name request with the NetBIOS address of
Computer B.
- If Computer B is on the local network, Computer A will receive a
response to its name request broadcast containing the IP address of
Computer B. ARP will then resolve Computer B's IP address to its
hardware address.
- If Computer B is on a remote network, Computer A will not receive a
reply to its name request broadcast. The LMHOSTS file on Computer A
(contained in the %SystemRoot%\system32\drivers\etc directory) is then
parsed. If a mapping for the NetBIOS name of Computer B exists, it is
resolved to its IP address. Since this is the IP address of a remote
computer, ARP will determine the hardware address of the default gateway
for routing to Computer B.
Additional query words:
prodnt
Keywords : kbnetwork
Version : :
Platform : WINDOWS
Issue type :
|