How to Perform Net Setup of WordPerfect Conversions Kit
ID: q132119
|
The information in this article applies to:
-
Microsoft Word for Windows, versions 6.0, 6.0a, 6.0c
SUMMARY
This article describes how to install the Supplemental WordPerfect
Conversions Kit on a network so that users can set up the converters to use
on their workstations.
MORE INFORMATION
Network installation is a two-part process. First, the Network
Administrator performs an Administrative Setup, then each user at a
workstation performs a Workstation Setup.
Part 1: Administrative Setup
If users on the network are running shared Windows from the server, the
person performing the Network install must be running the same shared
Windows, and must have all directory privileges to the shared Windows
directory.
- If you are installing the Conversion Kit from a floppy disk, insert the
disk in the appropriate floppy disk drive.
If you downloaded WPCNV.EXE from an online service, you'll need to
expand the files so they can be installed. Make sure the WPCNV.EXE file
has been placed in a new directory before expanding the files it
contains.
IMPORTANT: Don't expand the files into the Word directory, as the Setup
program will fail when run.
To expand the files contained in the WPCNV.EXE file so that you can
proceed to the next step:
- In File Manager, locate WPCNV.EXE and double-click the filename.
- Choose OK.
- In File Manager, click Run on the File menu.
- Type <source>:\setup /A and press ENTER,
where "<source>" is the directory containing the extracted contents of
WPCNV.EXE, or if the kit was ordered on disk, the drive letter where the
disk was inserted.
For example, type
c:\download\setup /A
-or-
a:\setup /A
- Specify the destination directory for the setup files. The default
directory is WPKIT at the root level of the server.
- Specify the shared files directory. This directory is where the kit's
shared components are stored, and is typically the MSAPPS directory on
the server.
- Choose the location where shared files will be accessed by users who do
subsequent Workstation installations from the server. The choices are:
Server, Local Hard Drive, and User's Choice.
The WordPerfect Kit Administrative Setup File Organization section below
illustrates where the files are placed on the server.
Part 2: Workstation Setup
Each user at a Workstation will then need to run SETUP.EXE from the network
server location. Each user performing a Workstation install must specify
his or her own Word directory as the destination directory when prompted by
Setup. The user's Word directory can reside on the local workstation, or on
the server.
- Exit Microsoft Word if it is running.
- In Program Manager, click Run on the File menu.
- Type <source>:\setup and press ENTER,
where "<source>" is the path to the directory located on the server as
specified by the Network Administrator in Step 4 in the Administrative
Setup. (The default directory is WPKIT located at the root level.)
- At the screen where the user is prompted to choose the desired type of
installation (Complete, Custom, or Workstation), the user must specify
the user's Word directory.
NOTE: The shared Word directory on the server may appear as the default
destination directory in the dialog screen. However, the shared Word
directory must only be selected during the Administrative Setup of the
kit.
- Specify where shared files will be installed. The user has the choice
of installing shared items to the local <Windows>\MSAPPS directory or
the shared items directory on the server.
The WordPerfect Kit Workstation Setup File Organization section below
illustrates where the files are placed.
WORDPERFECT KIT ADMINISTRATIVE SETUP FILE ORGANIZATION
The items in brackets represent directories on the server.
<MSAPPS>
<TEXTCONV>
WPFT5.CNV
WPFT6.CNV
<GRPHFLT>
WPGIMP.FLT
WPGEXP.FLT
<WPKIT>
<Shared>
WPFT5.CNV
WPFT6.CNV
WPFT5.EQU
WPGIMP.FLT
WPGEXP.FLT
<System>
GREKSYMB.TTF
ICONSYEX.TTF
MATHEXT.TTF
MULTIEXT.TTF
TYPOEXT.TTF
<Template>
WPWIN.DOT
WPDOS.DOT
_MSSETUP.EXE
ACMSETUP.HLP
MSCPYDIS.DLL
MSETUP.DLL
SETUP.EXE
SETUP.INI
SETUP.STF
WPCONV.DOC
WPKIT.INF
WPKIT16.DLL
WORDPERFECT KIT WORKSTATION SETUP FILE ORGANIZATION
The items in brackets represent directories on the local workstation.
<WINWORD>
WPCONV.DOC
WPKSETUP.STF
<TEMPLATE>
WPDOS.DOT
WPWIN.DOT
<WINDOWS>
<MSAPPS>
<GRPHFLT>
WPGEXP.FLT*+
WPGIMP.FLT*+
<TEXTCONV>
WPFT5.CNV*+
WPFT5.EQU*+
WPFT6.CNV*+
<SYSTEM>
GREKSYMB.TTF+
ICONSYEX.TTF+
MATHEXT.TTF+
MULTIEXT.TTF+
TYPOEXT.TTF+
* These items can be stored on the server if the user so specifies. The
user will be able to specify where the starred items are stored if the
Network Administrator chooses "User's Choice" in step 7 of
Administrative Installation.
+ In a shared Windows environment, these items will be stored in the user
Windows directory either on the server or on the local drive. Note that
under shared Windows, a <Windows>\SYSTEM subdirectory does not exist.
All files that would typically be installed in the <Windows>\SYSTEM
subdirectory of a local install of Windows would be installed in the
Windows directory.
WORDPERFECT KIT FILES INSTALLED
WPFT5.CNV WordPerfect 5.x import/export converter
WPFT6.CNV WordPerfect 6.x import only converter
WPFT5.EQU WordPerfect Equations converter
WPGIMP.FLT WordPerfect graphic import filter
WPGEXP.FLT WordPerfect graphic export filter
WPCONV.DOC WordPerfect Kit Documentation
WPWIN.DOT Template: WordPerfect for Windows users
WPDOS.DOT Template: WordPerfect for DOS users
WordPerfect Fonts:
GREKSYMB.TTF Greek Symbols
ICONSYEX.TTF Iconic Symbols
MATHEXT.TTF Math Ext
MULTIEXT.TTF Multinational Ext
TYPOEXT.TTF Typographic Ext
IMPORTANT NOTE: Before opening WordPerfect documents in Word 6.0 for
Windows, make sure the Confirm Conversions check box is selected in the
File Open dialog box. When opening a WordPerfect 6.0 or 6.1 document, you
will need to manually select the WordPerfect 6.0 or 6.1 file type in the
Convert File dialog box.
For information about the two templates and the features that are converted
by the WordPerfect converters, open and read the WPCONV.DOC file that is
installed in the Word for Windows program directory.
If you have questions about installing or using the converters supplied on
this disk, in the United States call Product Support Services at (425) 462-
9673. Outside the United States, contact your local Microsoft subsidiary.
Additional query words:
word6 winword macword inf textconv netsetup perfect 6.00a 6.00c geninfo
Keywords : kb3rdparty
Version : WINDOWS:6.0,6.0a,6.0c
Platform : WINDOWS
Issue type :
|