SMTP: Err Msg: ERROR: network_read: timed out

ID: Q101682

The information in this article applies to:
  • Microsoft Mail Gateway to SMTP, versions 2.1, 3.0

SUMMARY

Microsoft Mail Gateway to SMTP may display this message:

ERROR network_read: timed out
ERROR SMTP_get_response:getline () <=0
[tx] Quit
ERROR network_read: timed out
ERROR SMTP_get_response:getline () <=0
SMTP_close (socket=257)
NC_incoming:system error
This indicates that the SMTP gateway was unable to complete the message transfer to the smarthost configured in the Administrator program (Gateway-SMTP-SETUP: "IP address of SMTP Router"). This error message may appear in these situations:

  • The smart host goes down.


    • -or-

  • The network between the SMTP gateway computer and the smarthost is down.


You can test these trouble points by trying to PING the smarthost or doing a TELNET to port 25 of the smarthost. Once this test is successful, the gateway will run. For example 

   PING 123.123.12.1
   TELNET 123.123.12.1 25
where 123.123.12.1 is the IP address of the smarthost.

If this error message occurs frequently, check the network with a protocol analyzer for problems.

Additional query words: 2.10 3.00 ERRMSG smart host

Keywords :
Version : MS-DOS:2.1,3.0
Platform : MS-DOS
Issue type :


Last Reviewed: November 3, 1999
© 2000 Microsoft Corporation. All rights reserved. Terms of Use.