PC Gen: Summary List of Mail for PC Networks 3.2a Bug Fixes

• Microsoft Mail for PC Networks, version 3.2a

SUMMARY

Below is a list of bugs fixed in version 3.2a of Microsoft Mail for PC Networks.

For information on obtaining this update, query on the following word in the Microsoft Knowledge Base (without the spaces):

m a i l u p d

SUMMARY OF FILES UPGRADED FOR MAIL 3.2A

The server files upgraded due to fixes or otherwise revised for Mail 3.2a are as follows (.EXE files are now version 3.2.9):

SETUP.EXE
SETUP.INF
README.TXT
ADMIN.EXE
MOVEUSER.EXE
RESORT.EXE
ASYNC.OVL
EXTERNAL.EXE
EXTERNAL.HLP
IMPORT.EXE
REBUILD.EXE
REQMAIN.EXE
SRVMAIN.EXE
X25ATLAN.OVL
X25EICON.OVL
NOVEXT.EXE (French version ONLY)
DISPATCH.EXE (French version ONLY)

SETUP.EXE
MSMAIL.EXE
CONVERT.EXE
MAILSPL.EXE
MAPI.DLL
MSSFS.DLL
PABSNP.DLL
STORE.DLL
AB.DLL
VFORMS.DLL
MAILMGR.DLL
DEMIWLO.DLL (PM client)

SERVER BUGS FIXED IN MAIL 3.2A

PC Adm: Microsoft Mail ADMIN.EXE 3.2.12 Update

Q107443

• With the earlier version of this file, a corrupt .MAI file could be created when you export the address list to a large number of postoffices. ADMIN.EXE has been modified so that the correct .MAI file is created when address lists are exported.



• With the earlier version of this file, a corrupt SRVCONF.GLB file could be created when you add a Directory Synchronization (Dir- Sync) requestor on a computer that has an EtherExpress(TM) 16 network card and is running the Ethernet_II protocol. ADMIN.EXE has been modified so that it uses a buffer size of 512 bytes instead of 1K for its buffered I/O.



• If a Mail Remote for Windows user forgets his or her password or if the password is changed while the remote driver is in use, the password can now be reset.
  
  NOTE: To reset the password, you must ensure that the user's data disk was created using ADMIN.EXE version 3.2.9 or later.



• Local postoffice users added with the ADMIN.EXE utility will no longer be assigned an invalid identification number if the TID.GLB file is locked open. Also, batch creation of local postoffice users with the ADMIN.EXE utility while the TID.GLB file is locked open no longer results in the same invalid identification number being assigned to multiple users.



• When you use ADMIN.EXE to change the routing type defined for a hub postoffice, the routing type definition for any downstream postoffice is also updated to match the routing type of the hub postoffice.



• When you use ADMIN.EXE to remove users from a global group, access to group folders associated with that global group is also removed.



• Correct figures are now reported when you use the Mail Administrator program to create reports that involve multiple postoffices with more than 32,768 users.

PC Adm: Removed User Still Has Access to Group Folder

Q105967

PC Ext: EXTERNAL.EXE 3.2.13 Update

Q111558

• NetBIOS notification does not work when the sender and receiver are on different postoffices and there are multiple External Mail programs running. The only time notification works is if the first External Mail program that was started up dispatches mail between the sender's and receiver's postoffices.



• On Novell(R) networks, the RNETWORK.GLB file is not updated at 4:00 A.M. on any drives that are dynamically attached.



• In low-memory conditions, the External Mail program deletes mail from the outgoing mail queue without returning that mail to the sender. There are error messages in the SESSION.LOG and SYSTEM.LOG, but the mail file is still deleted. In most cases, the sender is not notified that the mail was not delivered. With the updated External Mail program, the mail message is not deleted but remains in the outgoing queue, and the External Mail program still attempts to deliver the mail. Because there is not enough memory to return the message to the sender, there is no entry in the SYSTEM.LOG. The administrator can return the mail from the queue.



• When the EXTERNAL.INI parameter MinKDiskFull is not included in the EXTERNAL.INI file, the default value of 0 is used. This causes the External Mail program to attempt to deliver mail to a postoffice that has no disk space. The default value for MinKDiskFull has now been changed from 0 to 100K.



• When the External Mail program marks a dynamic drive as being full (no disk space), it is not checked again until the External Mail program is restarted. The External Mail program now checks dynamic drives that are full on every cycle and changes their status if disk space becomes available.



• Messages transferred asynchronously or through an X.25 connection do not get time stamped. Therefore, when you view the received message in Mail for Windows, the received date/time is actually the date/time it was composed, not the date/time it was received by External. The External Mail program now time stamps all messages.



• The External Mail program sometimes hangs when CommType=X25EICON. The CommType setting can be specified in the .INI file or on the command line for External.



• Versions 3.2.5 and 3.2.6 of the External Mail program mark a static drive as being full (no disk space) and the drive is not checked again until the External Mail program is restarted. The External Mail program now checks static drives that are full on every cycle and changes their status if disk space becomes available.



• Mail sent to Remote Mail users would not be recorded in the SENT.LOG file if the LogSent option was specified in the EXTERNAL.INI file or if the -ms command-line option was included when the External Mail program was started. Version 3.2.9 of the External Mail program will correctly log mail sent to Remote Mail users in the SENT.LOG file.



• When the Import utility is run with the autocreate function, and the External Mail program is also run against the same postoffice across a wide-area network (WAN) connection or in a high mail traffic situation, the Import utility may report "Fatal [59] Error autocreating postoffice: XXXXXXXXXX." This error occurs because of .XTN file contention between the External Mail program and the Import utility. Under normal circumstances, the External Mail program holds an .XTN file open for a very short interval and file contention is not an issue. Version 3.2.9 of the External Mail program now allows the Import utility to have write access to the .XTN file.



• The External Mail program now determines and uses the appropriate international date format when the MS-DOS country command is used in the CONFIG.SYS file of the workstation running External.



• The MinKDiskFull and MinKDiskNotFull parameters and their specified values are now recorded in the SESSION.LOG file and are displayed on screen in the External Mail program's LAN Postoffice Mail Activity display area when you use EXTERNAL.INI file entries and the undocumented -q1 command-line switch. Previously, logging of these parameters and their specified values would only occur when you used command-line parameters and the undocumented -q1 command- line switch.

PC Ext: Err Msg: Retry Count Exceeded

Q113165

Retry count exceeded

PC Adm: IMPORT.EXE 3.2.9 Update

Q111556

• The Import utility (with the -A option) no longer adds invalid DGN names to the Postoffice Address List (POL) when those names do not appear in the normal .USR files.



• The Import utility no longer corrupts the MCI.NME file when importing MCI user names. This problem caused the Mail Administrator program to incorrectly display the MCI address information.



• The Import utility no longer stops responding (hangs) when it processes RESYNC.GLB after doing heavy processing.



• The Import utility now updates FLAG.GLB when it runs, causing the External Mail program to update its address lists on the next cycle interval.



• The Import utility no longer does 1-byte reads of the template files.



• When it is importing modified SNADS template information, the Import utility no longer incorrectly sequences the information.



• When you use the Import utility to modify a user's configuration (any option set with an "&") and that user has remote access, the user's remote access ability is no longer removed.



• When you use the Modify transaction type to update a user in the POL but you do not make any changes to the user's alias, the user's record is no longer deleted.



• When you use the -A command-line option to modify template information, the Import utility no longer increases the size of the associated .INF file on each pass. The Import utility now creates a new .INF file that incorporates the changes rather than appending the changes to the existing .INF file.



• When you use the Import utility to change a user's mailbox name, Error 34--"Could not access log information file"--no longer occurs when you start the MS-DOS client.



• Deleting a local user with Import no longer leaves the user's folder files (.IDX and .FLD) orphaned in the FOLDERS\LOC\0000???? subdirectory of the Mail database.



• A Microsoft Mail Connection 3.2 PROXYNET\PROXYPO postoffice address list is now propagated to a downstream requestor postoffice when the gateway postoffice is also the directory server postoffice. The Import utility now copies FFAPI postoffice address lists from the directory server to the GLB\RESYNC.GLB file to perform a directory synchronization manual import procedure.



• Local postoffice users added with the Import utility will no longer be assigned an invalid identification number if the TID.GLB file is locked open. Also, batch creation of local postoffice users with the Import utility while the TID.GLB file is locked open no longer results in the same invalid identification number being assigned to multiple users.



• Trap D errors or "An OS/2 program caused a protection violation" error no longer occurs under OS/2(R) or under the OS/2 subsystem of Windows NT(TM) when you use the Import utility with the -ST command- line option.



• The Import utility now creates unique mailbag numbers when you add local postoffice users, even if the CONTROL.GLB file has been reset to zero.

PC Adm: Deleting Users w/IMPORT Leaves Orphaned Folders, .IDXs

Q117197

PC Adm: IMPORT .INF File Size Increases When IMPORT -A Is Used

Q117198

PC Adm: Err: Modifying Mailbox Name Causes Notice 34 & 127

Q117259

Notice 34 Could not access log information file.

Notice 127 Private Folder Index Missing.

PC Adm: IMPORT.EXE Does Not Recover from Reset CONTROL.GLB

Q117738

PC Adm: Microsoft Mail MOVEUSER.EXE Version 3.2.8 Update

Q118510

• Users moved from one postoffice to another postoffice with the MOVEUSER utility are assigned an invalid identification number if the TID.GLB file on the destination postoffice is locked open. Moving multiple users while the TID.GLB file is locked open results in the same invalid identification number being assigned to multiple users. When Mail is addressed to one of these users, the other users with the same invalid identification number also get added to the recipients list. To avoid this problem, the MOVEUSER version 3.2.8 update will not move a user if the TID.GLB file is locked open.

PC DirSync: REBUILD.EXE 3.2.4 Update

Q111701

PC DirSync: Bad CRC Causes No Error; Corrupted Data in SRVCONF

• When a bad CRC is found in the Dir-Sync attachment (.ATT) file, no error message is generated.



• When you use certain brands of network cards and Novell NetWare version 3.x, the first 6 bytes of the SRVCONF.GLB file are corrupted. This problem does not occur under all circumstances and is not consistent among operating systems. The next time SRVMAIN.EXE runs, it will fail because of the corrupted data.

PC DirSync: SRVMAIN.EXE 3.2.9 Update

Q111703

• The Import utility no longer stops responding (hangs) when it processes RESYNC.GLB after doing heavy processing. This problem occurred because the heap became corrupted when it was under a heavy load.



• The Srvmain utility no longer does one-byte reads of the template files.



• A Microsoft Mail Connection 3.2 PROXYNET\PROXYPO postoffice address list is now propagated to a downstream requestor postoffice when the gateway postoffice is also the directory server postoffice. The Import utility now copies FFAPI postoffice address lists from the directory server to the GLB\RESYNC.GLB file to perform a directory synchronization manual import procedure.

PC DirSync: FFAPI ProxyNet/ProxyPO Not Included in Import

CLIENT BUGS FIXED IN MAIL 3.2A

PC Win: Network Error Using Mail Conversion Program

Q97734

PC Adm: Microsoft Mail MAILMGR.DLL Version 3.2.0.4074 Update

Q120448

• The Check Names function fails to properly resolve partial friendly names and returns several selections when a unique resolution is possible. This behavior is most obvious when the GAL is selected as the default address list and the first and last name of the intended recipient begin with the same letter.

PC MAPI: WA0729: Microsoft Mail Simple MAPI Update

Q95522

• Deleting a message in a shared folder does not function as expected; the message in the folder is deleted, but the header still appears. If you select the header to bring up the message, Mail for Windows returns a dialog box that says "The message cannot be accessed." Also, if you change a message in any way, the message becomes inaccessible.



• Reply, Reply All, and Forward commands on customer messages in shared folders fail if these commands are called from Mail for Windows. This problem occurs because the client hands off the temporary message ID of the shared folder, instead of the permanent shared-folder message ID.



• To correctly launch e-forms, Microsoft Electronic Forms Designer requires that the message type it gives to Simple MAPI be preserved in the delivered message. However, the message type is not encoded in WINMAIL.DAT by default, so it is lost across gateways. Therefore, the message is received and displayed as a note rather than as a Microsoft electronic form.

PC MAPI: Errors When Compiling Sample in Visual Basic

Q115164

PC Win: WA0889: Mail for MSMAIL.EXE 3.20.4037 Update

Q111557

• When an open custom message is deleted from a shared folder, the message header still appears in the folder. Trying to open the message again results in the error "The message cannot be accessed."



• You cannot do a Reply, Reply All, or Forward on a custom message that is located in a shared folder.

PC Win: Mail for Windows MSSFS.DLL 3.2.0.4074 Update

Q96694

• When you send mail to an external postoffice group or gateway group that contains extended characters in the address, Mail for Windows does not convert from code page 850 to the ANSI code page when it reads the records from the NETPO.GLB file or any other gateway address file.



• External postoffices, SNADS DGNs, and nodes for PROFS(R) and OfficeVision(R) are not displayed in alphabetic order because Mail for Windows reads them in one at a time and adds them to the hierarchy. With the updated version of MSSFS.DLL, Mail for Windows reads them in all at once, sorts them, and adds them to the hierarchy.



• An "Unknown user" error may occur when you send a message. Mail for Windows caches only the first 8170 bytes of the NETWORK.GLB file and loses the rest. Postoffices and gateways that are defined past 8170 bytes are ignored; therefore, you cannot send messages to the users on those postoffices or gateways.



• The simple MAPI command MAPILogon() does a case-sensitive match on the user name and password; however, Microsoft Mail is not case sensitive. This problem occurs only if a MAPI session was already established when MAPILogon() is called.



• Incorrect message dates are displayed. When parsing old A.M./P.M. style dates (generated from some gateways), Mail for Windows adds 12 to the time if it is P.M. However, if the message was sent during the noon hour, the time is incorrectly read as 24:xx. Because this is an invalid time, the date is set to the programmer's birthday (12/16/68).



• Mail for Windows may cause a general protection (GP) fault when it encounters a corrupt .XTN file in the database. It does not properly handle .XTN files that are an incorrect size.

• Mail for Windows cannot view templates of SNADS or PROFS users when GALONLY=1 is set in the MSMAIL.INI file.



• When you read a custom message from a shared folder, the wrong date is displayed.



• In version 3.0b of Mail for Windows, the time stamp associated with resolved addresses is not saved correctly: if the Global Address List (GAL) was built twice in the same day, any mail addressed but not sent before the second rebuild could be misdirected. This problem was partially corrected in version 3.2 of Mail for Windows: the time stamp is saved correctly, thus reducing the time frame in which this problem could occur from one day to one clock hour. However, mail may still be misdirected at sites where GAL rebuilds are made within the same clock hour.



• All users running Windows from a shared installation point must use the same postoffice when they use Advanced Security. This problem occurs because the MAIL.DAT file is saved to the Windows SYSTEM subdirectory, which is shared among all users running Windows from the same location. The client now checks both the WINDOWS (user's local directory) and WINDOWS\SYSTEM directories, in that order, for the MAIL.DAT file.



• Duplicate addresses are added to the Personal Address Book (PAB).



• If users are running Mail for Windows from a shared installation point and the NETBIOS=1 flag is set in the MSMAIL.INI file, Mail checks the size, date, and time of the MSMAIL.INI file every 5 seconds. Because the .INI file is on the network, frames are sent to the server to check the size of the file every 5 seconds, thus increasing traffic on the network. These checks no longer occur with this update.



• When an urgent message is sent to an external user with NetBIOS notification in use, Mail for Windows does not send a NetBIOS datagram to the External Mail program. This process does work correctly when an urgent message is sent to a local user. When sending urgent messages, Mail for Windows now sends notifications to the External Mail program when NetBIOS notification is in use.



• MACBinary II attachments are not recognized when originating from external Mail Systems.



• When sending mail such that the number of recipients is greater than 200 (exact number depends on the specific address list), the body of the message will be missing.



• When "Add recipients to Personal Address Book" is selected, the GAL.NME file is locked open each time a global address list name is added to a compose note.



• In certain situations, viewing details of an external name from a group results in the error message: "A GLB file on your server is corrupt."



• If a message has more than 22 recipients selected from the GAL and that message is stored in a shared folder, the message appears to be corrupted. Attempting to open the message from the shared folder results in the error: "Mail system error, Mail could not read the entire message from the Post Office. Some parts of the message may be missing. Ask the sender to resend the message."



• Under certain conditions, a general protection (GP) fault can occur in MSSFS.DLL when the MAPILogon() function is used to begin a session with the messaging system.



• The Check Names function fails to properly resolve partial friendly names and returns several selections when a unique resolution is possible. This behavior is most obvious when the GAL is selected as the default address list and the first and last name of the intended recipient begin with the same letter.

PC DirSync: Err Msg: Fatal [203] GAL Rebuild Problem

Q108831

Fatal [203] GAL Rebuild problem accessing files Global Address List not installed on this Postoffice

PC Win: Network List Doesn't Sort Alphabetically

Q99120

PC Win: Err Msg: Undeliverable Mail

Q114942

Undeliverable Mail

PC Win: Missing Message Text When Sending to a Large Group

Q117844

PC Win: Duplicate PAB Entries--Part 2

Q100498

PC Win: WA0887: Mail for Windows PABNSP.DLL 3.2.0.4046 Update

Q103821

PC Win: WA0722: Mail for Windows SETUP.EXE Version 3.0.2.4001

PC Win: WA0723: Mail for Windows STORE.DLL 3.2.0.4065 Update

• When you run version 3.0b of Microsoft Mail for Windows on a PC- NFS(R) file server, the Mail Message File (MMF) becomes corrupted and prevents you from sending and reading mail messages.



• The MMF recovery feature of version 3.0b or 3.2 of Microsoft Mail for Windows does not work when the MMF is on a Novell(R) file server and you do not have File Scan permissions for the Mail database.



• The manual MMF recovery and compression features of version 3.0b or 3.2 of Microsoft Mail for Windows do not work when you run the OS/2(R) Presentation Manager(R) (PM) client. When you start the MMF recovery or compression feature by holding down the SHIFT or F5 key, respectively, the computer hangs after the recovery or compression process finishes. To resolve this problem, the progress indicator is no longer displayed while the recovery or compression feature is running. The indicator is still displayed when you run Microsoft Mail for Windows.



• Sending Schedule+ for Windows meeting requests with the user's MMF stored on a PC-NFS file server eventually fails with the error message "Schedule file is locked."



• Folder export fails if the destination drive filled up during an attachment copy; however, no error appears and the export leaves an unusable message in the exported folder. Once the message is imported, that message is unreadable.

PC Win: WA0762: Mail for Windows VFORMS.DLL 3.2.0.4064 Update

Q96747

• When you attempt to launch attachments that do not have an extension, an error occurs when you hold down the ALT key and double-click the mouse button to load the attachment in Notepad.



• When you attempt to launch MACBINARY attachments, Mail for Windows changes the name of the file being launched if that filename is less than eight characters in length.

• When you open a MAPI Send note through a Windows-based application (for example, Microsoft Word or Microsoft Excel) and the application is launched again via Mail, the application is brought to the front, but the Send note is left in the background. If the application is running full screen, the computer hangs because the active window (the Send note) will accept any keystrokes; however, it is hidden by the full-screen application.

PC Win: Attached MAC Filenames Convert to Windows Incorrectly

Q115165

PC Mac: Macintosh Client Version 3.0.3 Update

Q103945

• With the earlier version of this file, the computer could stop responding when sending a message to a personal group under low memory conditions. The Macintosh Client file has been modified to correct this problem.



• Some network operating systems will not allow a file to be created in all uppercase letters. The Macintosh Client file has been modified for these types of networks to allow the client to create filenames in lowercase letters if LOWRCASE.GLB exists in the GLB subdirectory of the Mail database.



• With the earlier version of this file, when mail is sent to global groups that contain nonalphabetic characters in their names, the recipient field appears blank when the message is viewed by a Mail for Windows user. The Macintosh Client file has been modified to correct this problem.

Additional query words: 3.20a

Keywords :
Version : WINDOWS:3.2a
Platform : WINDOWS
Issue type :