X400: Using a 3Com Etherlink II Network Card for TP4/CLNS

ID: Q137045


The information in this article applies to:
  • Microsoft Mail Gateway to X.400, version 3.2


SYMPTOMS

When you try to configure the Mail Gateway to X.400 using TP4/CLNS over a 3Com Etherlink II (assy 2227-04 rev.F) or 3Com Etherlink II TP (assy 8782- 01 rev.d1), the gateway may hang while initializing.


WORKAROUND

Try to run the GETMAC.EXE utility (C:\TP4\UTIL\), included with the X.400 Gateway. If this utility also hangs, then remove the 3Com card and substitute a different card.

NOTE: At this time, the above cards are the only ones known to have this conflict.

Additional query words: 3.20

Keywords :
Version : MS-DOS:3.2
Platform : MS-DOS
Issue type :


Last Reviewed: November 14, 1999
© 2000 Microsoft Corporation. All rights reserved. Terms of Use.