PC NTMMTA: SESSION.LOG Displays Pulse as Baud Rate

ID: Q139368

The information in this article applies to:

Microsoft Mail Multitasking MTA for Windows NT, version 3.5

SYMPTOMS

The Microsoft Windows NT Multitasking MTA (NT MMTA) may incorrectly log Pulse for 38,400 baud rate communications, and Touch Tone for 57,600 baud rate communication links.

RESOLUTION

A supported fix that corrects this problem is now available from Microsoft, but has not been fully regression tested and should be applied only to systems experiencing this specific problem.

To resolve this problem, contact Microsoft Product Support Services to obtain the fix. For a complete list of Microsoft Product Support Services phone numbers and information on support costs, please go to the following address on the World Wide Web:

http://support.microsoft.com/support/supportnet/default.asp

The English version of this fix should have the following file attributes or later:


   File Name      Version
   ----------------------
   External.exe   3.5.25

This hotfix has been posted to the following Internet location as Exty2k.exe:

ftp://ftp.microsoft.com/bussys/mail/pcmail-public/All-Y2K/

STATUS

Microsoft has confirmed this to be a problem in Microsoft Mail Multitasking MTA for Windows NT version 3.5.

MORE INFORMATION

The communication rate used by the modem to establish a connection to the remote modem is logged based on entries in the modem script. This rate normally appears as a connection statement, where the baud rate appears after the word CONNECT, for example,

>>>CONNECT 28,800<<<

NOTE: The connection rate is the more accurate rate when determining the rate of information exchange between the External Mail program and the Remote External or one of Remote Mail programs.

The baud statement is used in the modem script to dictate the baud rate of the COM port to a specified value. The baud rate entry is recorded after the modem has been initialized by the External Mail program. The Baud Rate entry in the SESSION.LOG of the External Mail program is used to display the connection rate established by the External program between the serial port and the local modem.

The baud rate entry can be located in the COMM settings section of the modem initialization in the SESSION.LOG.

For example,

Initializing Modem:
Line Speed : 57600
OUT: [AT&F?]
IN: [??OK??]
OUT: [AT&C1&D2E0L0M1V0X3&K3W2?]
IN: [AT&C1&D2E0L0M1V0X3&K3W2?0?]
OUT: [ATS0-0S7=45S9=6S10=50S12=50?]
IN: [0?]
COMM settings:
Comm. Port: Com1
Baud Rate: Touch Tone
Dial Mode: Touch Tone
Script File: <Script Name>
Initialization complete. Ready.

The only valid baud rates that the External Mail program can use to set the serial port for communications with the modem are 300, 1200, 2400, 4800, 9600, 19200, 38400, and 57600.

Additional query words: 3.50 windows nt baud=pulse baud=tone post35fix

Keywords : MailPCNTMMTA
Version : :3.5
Platform : WINDOWS
Issue type : kbbug