PC WFW: Version 3.2 Postoffice Upgrade Instructions

• Microsoft Mail for PC Networks, version 3.2

SUMMARY

This article explains how to install version 3.2 of the Microsoft Mail for Windows Postoffice Upgrade for Microsoft Windows for Workgroups.

The focus of these directions is based on working from the Windows for Workgroups station on which the Windows for Workgroups postoffice is installed. To complete the upgrade process, perform the following steps. You may need to make adjustments, as needed, if your postoffice is located on a Novell or LAN Manager server.

NOTE: Be sure all users on the postoffice have exited and signed out of Mail before installing the upgrade.

MORE INFORMATION

To upgrade the existing Windows for Workgroups postoffice to a full version 3.2 Microsoft Mail for PC Networks postoffice, run the SETUP.EXE program from the Setup Postoffice disk. You will be prompted with a series of screens and questions.

Follow the instructions, inserting disks as prompted, until the upgrade process is finished. The screens and questions are as follows:

• Welcome screen
  
  Setup can do the following:
  
  
  • Update a Workgroup postoffice
  
  
  
  • Copy Microsoft Mail server programs
  
  
  
  • Copy Microsoft Mail client programs
  
  
  



• Prompt screen
  
  Setup then prompts for:
  
  
  • Location of the postoffice data files
  
  
  
  • Administrators mailbox name and password
  
  
  
  • Postoffice and network name
  
  
  
  • If you are running gateways earlier than version 3.0
  
  
  
  • If you are moving the postoffice
  
  
  
  • Server programs to install
  
  
  
  • Client programs to install
  
  
  



• Postoffice Directory Screen
  
  Please specify the directory containing the Workgroup postoffice. The postoffice must exist in this directory.
  
  Setup suggests the following directory:

  
        C:\MAILDATA 

  NOTE: The Windows for Workgroups postoffice may be located in C:\WINDOWS\WGPO or in another location. If you are not sure, check with your network administrator.



• Mailbox screen
  
  Enter your administrator name:



• Password screen
  
  Enter your password:



• Gateway Installation screen
  
  Will you run Microsoft Mail gateways earlier than 3.0?



• Postoffice Relocation screen
  
  No relocation
  Microsoft LAN Manager Compatible Novell



• Server programs screen
  
  Select Server programs you want to install
  
  Done
  Administration and Utilities
  Server agents
  Modem scripts files
  
  NOTE: You must choose to install the Administration and Utilities programs here in order to access the postoffice administrator program ADMIN.EXE. This utility replaces the Windows for Workgroups Postoffice Manager. You will be prompted for a directory location for the Mail executable files.
  
  Setup suggests the following directory:

  
        C:\MAILEXE 

  WARNING: Do NOT specify the Windows directory.



• Client Programs screen
  
  Select the client programs you want to install
  
  Done
  Windows and Presentation Manager
  MS-DOS
  
  NOTE: You should always install the MS-DOS-based workstation even if all your users will be running different workstation software. The MS-DOS client installation copies files needed by other Microsoft Mail components. It may also be helpful when troubleshooting the Mail system.
  
  NOTE: You must choose to install Windows and Presentation Manager client files here, if you plan to update your users' local workstations to the latest version of the Windows or Presentation Manager client. If you choosing not to install the files at this time, you must rerun this portion of Setup before you can complete the client upgrades.



• Confirm Choices screen



• Updating screen
  
  NOTE: You will see files being copied.



• Installation Complete screen
  
  Setup has successfully installed Microsoft Mail Extensions.



• From File Manager, share the mail executables directory with Full Rights. From File Manager, share the postoffice directory with Full Rights (if you have not already done so).



• For Macintosh users only: Use the Apple Macintosh Workstation disk and refer to Chapter 1 of the Microsoft Mail "Administrator's Guide."



• Locate the postoffice and use the ADMIN.EXE program on a nondedicated Windows for Workgroups server.
  
  NOTE: Nondedicated refers to a Windows for Workgroups computer being used as a workstation and as the postoffice server.

Schedule+ Installation

• Create the Schedule+ Admin Mail account "adminsch." For more information about how to do this, see Chapter 2 of the Schedule+ "Administrator's Guide."



• Use the Schedule+ disks and follow the instructions in the Schedule+ for Windows "Administrator's Guide" to upgrade the server portion of Schedule+.

• Use the -d command-line parameter.
  
  When using a drive other than M for the postoffice, you can specify that drive using the -d<drive letter> parameter. For example, if you want to use the N drive, use the following syntax:

  c:\mailexe\admin -dn

  NOTE: The postoffice must be located in the current or root directory of the specified drive.
  
  The following is an example of incorrect usage of the -d parameter:

  c:\mailexe\admin -dn:\wgpo



-or-


• Copy ADMIN.EXE to the root of the postoffice directory.
  
  You can copy ADMIN.EXE to the postoffice directory rather than use a drive map for the MAILEXE directory. The following example uses N:\WGPO as the postoffice location. Copy ADMIN.EXE from the MAILEXE directory to N:\WGPO. Then invoke the Administrator program with the following syntax:

  n:\wgpo\admin -dn



-or-


• Use the MS-DOS SUBST command.
  
  If you are using a peer-to-peer network and the postoffice is located on a nondedicated server, you can elect to use the MS-DOS SUBST command to assign the root of drive M to the postoffice. You should add the SUBST command to your AUTOEXEC.BAT file. For example:

  subst m: c:\windows\wgpo

Windows and OS/2 Presentation Manager Upgrade

1. From File Manager, connect drive M to the shared postoffice directory.



2. Connect to the shared mail executables directory (any drive letter).



3. Double-click the SETUP.EXE file located in the mail executables directory. You will be prompted for a directory location to install Microsoft Mail.
   
   Setup suggests the following directory:

   
         C:\MSMAIL 

Schedule+ Upgrade

1. From File Manager, connect drive M to the shared postoffice directory.



2. Connect to the shared Schedule+ directory (any drive letter).



3. Double-click the SETUP.EXE file located in the shared Schedule+ directory. You will be prompted for a directory location to install Schedule+.

Additional query words: 3.20

Keywords :
Version : WINDOWS:3.2
Platform : WINDOWS
Issue type :