How to Setup a Live Unicast Stream with NetShow

ID: Q190018

The information in this article applies to:
  • Microsoft Windows NT Server NetShow 3.0 Services

SUMMARY

This article provides instructions on how to set up and configure a live Unicast stream.


MORE INFORMATION

To configure a live Unicast stream, you need to configure the NetShow Real Time Encoder and configure the NetShow Server.

Configuring the NetShow Real Time Encoder

To configure the NetShow Real Time Encoder, use the following steps:
  1. Start the Microsoft NetShow Real Time Encoder to launch the QuickStart Wizard. If the QuickStart Wizard does not start, click File and choose New.


  2. In the QuickStart Wizard, select QuickStart and click OK.


  3. You will be presented with a list of templates for the encoder settings. Using the information provided in the Description field, select the template that best suits your needs, and then click OK.


  4. The NetShow encoder is now configured and ready to encode.

    NOTE: For the field labeled "Stream Reference," the URL listed in this box is the URL that your NetShow server will use to connect to the NetShow Encoder.


  5. You can start the encoder by clicking the button with the arrow pointing to the right. You are now ready to move on to configuring your NetShow server.


Configure the NetShow Server

The NetShow documentation contains detailed information on configuring a Unicast Broadcast publishing point. Use the following steps to access the appropriate section in the documentation:
  1. Start the NetShow Administrator.


  2. The Administrator should open with the Start Here page selected. If it does not, select Start Here from the Administration Menu on the left side of the NetShow Administrator.


  3. From the Start Here page, select "Steps to setup a live broadcast from NetShow Encoder." The NetShow documentation will open and display the section labeled "To configure and access broadcast (live) Unicast streams."


  4. Click the link labeled "To create a broadcast Unicast publishing point using QuickStart" and follow the steps listed there to configure a Unicast Broadcast point.


When you have configured your Unicast Broadcast Publishing Point, start the NetShow Encoder.

Additional query words: sp

Keywords :
Version : WINNT:3.0
Platform : winnt
Issue type : kbhowto


Last Reviewed: June 23, 1999
© 2000 Microsoft Corporation. All rights reserved. Terms of Use.