HOWTO: Get IDispatch of an Excel or Word Document from an OCX

ID: Q190985

The information in this article applies to:
  • Microsoft Visual C++, 32-bit Editions, versions 5.0, 6.0
  • Microsoft Word 97 for Windows
  • Microsoft Excel 97 for Windows

SUMMARY

It is common for an OLE control to need the IDispatch of its container. You can often get the IDispatch by using QueryInterface() from immediately accessible interfaces on the server, such as IOleClientSite. However, for some servers, such as Microsoft Excel, this approach fails.

Another way to get the IDispatch is by using the GetActiveObject() API to get the server's IDispatch from the ROT. However, this method requires that you must be able to obtain the CLSID or ProgID of the server. Furthermore, ambiguous situations can occur where you can't distinguish between multiple instances of the server.

This article uses another approach to obtain the IDispatch, which works for both Microsoft Excel and Microsoft Word, even when multiple instances are running.

The steps listed below allow you to build a control that can obtain the IDispatch of the container's Document object.


MORE INFORMATION

Step By Step Example

  1. Create a new MFC ActiveX ControlWizard application named OffCntrDisp.


  2. Add the following member variables to your COleControl-derived class:


    3. 
      char m_szDocName[512];
      IDispatch *m_pDocDisp;
    NOTE: m_szDocName holds the name of the document containing our control, and m_pDocDisp is the IDispatch interface for that document.

  3. Add the following to the end of your COleControl-derived class definition:


    4. 
      // Interface Maps.
      protected:
         // IoleObject.
         BEGIN_INTERFACE_PART(MyOleObject, IOleObject)
            INIT_INTERFACE_PART(COffCtlDispCtrl, MyOleObject)
            STDMETHOD(SetClientSite)(LPOLECLIENTSITE);
            STDMETHOD(GetClientSite)(LPOLECLIENTSITE*);
            STDMETHOD(SetHostNames)(LPCOLESTR, LPCOLESTR);
            STDMETHOD(Close)(DWORD);
            STDMETHOD(SetMoniker)(DWORD, LPMONIKER);
            STDMETHOD(GetMoniker)(DWORD, DWORD, LPMONIKER*);
            STDMETHOD(InitFromData)(LPDATAOBJECT, BOOL, DWORD);
            STDMETHOD(GetClipboardData)(DWORD, LPDATAOBJECT*);
            STDMETHOD(DoVerb)(LONG, LPMSG, LPOLECLIENTSITE, LONG, HWND,
            LPCRECT);
            STDMETHOD(EnumVerbs)(IEnumOLEVERB**);
            STDMETHOD(Update)();
            STDMETHOD(IsUpToDate)();
            STDMETHOD(GetUserClassID)(CLSID*);
            STDMETHOD(GetUserType)(DWORD, LPOLESTR*);
            STDMETHOD(SetExtent)(DWORD, LPSIZEL);
            STDMETHOD(GetExtent)(DWORD, LPSIZEL);
            STDMETHOD(Advise)(LPADVISESINK, LPDWORD);
            STDMETHOD(Unadvise)(DWORD);
            STDMETHOD(EnumAdvise)(LPENUMSTATDATA*);
            STDMETHOD(GetMiscStatus)(DWORD, LPDWORD);
            STDMETHOD(SetColorScheme)(LPLOGPALETTE);
        END_INTERFACE_PART(MyOleObject)

        DECLARE_INTERFACE_MAP();
    This is added to override COleControl's default implementation of IOleObject with your custom MyOleObject.

  4. In your COleControl-derived class's constructor, add the following:


    5. 
      m_pDocDisp = NULL;
  5. Just after the following line in OffCntrDispCtl.cpp:


    6. 
      IMPLEMENT_OLECTLTYPE(COffCntrDispCtrl, IDS_OFFCNTRDISP,
       _dwOffCntrDispOleMisc)
    add the following code: 
    
      BEGIN_INTERFACE_MAP(COffCntrDispCtrl, COleControl)
          INTERFACE_PART(COffCntrDispCtrl, IID_IOleObject, MyOleObject)
      END_INTERFACE_MAP()
    This, along with the modifications in step 3, override COleControl's IOleObject.

  6. Just below the code added in step 5, add the following:


    7. 
      static char buf[8192];
      static void DoMsg(char *msg) {
         ::MessageBox(NULL, msg, "Message", MB_SETFOREGROUND);
      }

      static void DoErr(char *msg, long err) {
         static char errBuf[8192];
         sprintf(errBuf, "%s, Error: %ld (%08lx)", msg, err,err);
         ::MessageBox(NULL, errBuf, "Error", MB_SETFOREGROUND);
      }
    These are helpful routines used later for displaying messages.

  7. Paste all of the following code at the end of your OffCntrDispCtl.cpp file:


    8. 
      STDMETHODIMP COffCntrDispCtrl::XMyOleObject::SetHostNames(LPCOLESTR
      pwApp, LPCOLESTR pwObj)
      {
          METHOD_MANAGE_STATE(COffCntrDispCtrl, MyOleObject)
          ASSERT_VALID(pThis);

          // Convert OLESTR into ASCII string.
          WideCharToMultiByte(CP_ACP, 0, pwObj, -1, pThis->m_szDocName,
          512, NULL, NULL);

          // Get IDispatch.
          pThis->GetDocDispatch();

          // Test it out by getting the document name.
          pThis->TestDispatch();

          return S_OK;
      }

      STDMETHODIMP
      COffCntrDispCtrl::XMyOleObject::SetClientSite(LPOLECLIENTSITE
      pClientSite)
      {
          METHOD_MANAGE_STATE(COffCntrDispCtrl, MyOleObject)
          ASSERT_VALID(pThis);
          return pThis->m_xOleObject.SetClientSite(pClientSite);
      }

      STDMETHODIMP
      COffCntrDispCtrl::XMyOleObject::SetColorScheme(LPLOGPALETTE plp)
      {
          METHOD_MANAGE_STATE(COffCntrDispCtrl, MyOleObject)
          ASSERT_VALID(pThis);
          return pThis->m_xOleObject.SetColorScheme(plp);
      }

      STDMETHODIMP COffCntrDispCtrl::XMyOleObject::GetMiscStatus(DWORD
      dwAspect, DWORD* pdwStatus)
      {
          METHOD_MANAGE_STATE(COffCntrDispCtrl, MyOleObject)
          ASSERT_VALID(pThis);
          return pThis->m_xOleObject.GetMiscStatus(dwAspect, pdwStatus);
      }

      STDMETHODIMP
      COffCntrDispCtrl::XMyOleObject::EnumAdvise(LPENUMSTATDATA*
      ppenumAdvise)
      {
          METHOD_MANAGE_STATE(COffCntrDispCtrl, MyOleObject)
          ASSERT_VALID(pThis);
          return pThis->m_xOleObject.EnumAdvise(ppenumAdvise);
      }

      STDMETHODIMP COffCntrDispCtrl::XMyOleObject::Unadvise(DWORD
      dwConnection)
      {
          METHOD_MANAGE_STATE(COffCntrDispCtrl, MyOleObject)
          ASSERT_VALID(pThis);
          return pThis->m_xOleObject.Unadvise(dwConnection);
      }

      STDMETHODIMP COffCntrDispCtrl::XMyOleObject::Advise(LPADVISESINK
      pAdvSink, DWORD* pdwConnection)
      {
          METHOD_MANAGE_STATE(COffCntrDispCtrl, MyOleObject)
          ASSERT_VALID(pThis);
          return pThis->m_xOleObject.Advise(pAdvSink, pdwConnection);
      }

      STDMETHODIMP COffCntrDispCtrl::XMyOleObject::GetExtent(DWORD
      dwDrawAspect, LPSIZEL lpsizel)
      {
          METHOD_MANAGE_STATE(COffCntrDispCtrl, MyOleObject)
          ASSERT_VALID(pThis);
          return pThis->m_xOleObject.GetExtent(dwDrawAspect, lpsizel);
      }

      STDMETHODIMP COffCntrDispCtrl::XMyOleObject::SetExtent(DWORD
      dwDrawAspect, LPSIZEL lpsizel)
      {
          METHOD_MANAGE_STATE(COffCntrDispCtrl, MyOleObject)
          ASSERT_VALID(pThis);
          return pThis->m_xOleObject.SetExtent(dwDrawAspect, lpsizel);
      }

      STDMETHODIMP COffCntrDispCtrl::XMyOleObject::GetUserType(DWORD
      dwFormOfType, LPOLESTR* ppszUserType)
      {
          METHOD_MANAGE_STATE(COffCntrDispCtrl, MyOleObject)
          ASSERT_VALID(pThis);
          return pThis->m_xOleObject.GetUserType(dwFormOfType,
          ppszUserType);
      }

      STDMETHODIMP COffCntrDispCtrl::XMyOleObject::GetUserClassID(CLSID*
      pClsid)
      {
          METHOD_MANAGE_STATE(COffCntrDispCtrl, MyOleObject)
          ASSERT_VALID(pThis);
          return pThis->m_xOleObject.GetUserClassID(pClsid);
      }

      STDMETHODIMP COffCntrDispCtrl::XMyOleObject::IsUpToDate()
      {
          METHOD_MANAGE_STATE(COffCntrDispCtrl, MyOleObject)
          ASSERT_VALID(pThis);
          return pThis->m_xOleObject.IsUpToDate();
      }

      STDMETHODIMP COffCntrDispCtrl::XMyOleObject::Update()
      {
          METHOD_MANAGE_STATE(COffCntrDispCtrl, MyOleObject)
          ASSERT_VALID(pThis);
          return pThis->m_xOleObject.Update();
      }

      STDMETHODIMP COffCntrDispCtrl::XMyOleObject::EnumVerbs(LPENUMOLEVERB*
      ppenumOleVerb)
      {
          METHOD_MANAGE_STATE(COffCntrDispCtrl, MyOleObject)
          ASSERT_VALID(pThis);
          return pThis->m_xOleObject.EnumVerbs(ppenumOleVerb);
      }

      STDMETHODIMP COffCntrDispCtrl::XMyOleObject::DoVerb(LONG iVerb, LPMSG
      lpmsg, LPOLECLIENTSITE pActiveSite, LONG lindex, HWND hwndParent,
      LPCRECT lprcPosRect)
      {
          METHOD_MANAGE_STATE(COffCntrDispCtrl, MyOleObject)
          ASSERT_VALID(pThis);
          return pThis->m_xOleObject.DoVerb(iVerb, lpmsg, pActiveSite,
          lindex, hwndParent, lprcPosRect);
      }

      STDMETHODIMP COffCntrDispCtrl::XMyOleObject::GetClipboardData(DWORD
      dwReserved, LPDATAOBJECT *ppDataObject)
      {
          METHOD_MANAGE_STATE(COffCntrDispCtrl, MyOleObject)
          ASSERT_VALID(pThis);
          return pThis->m_xOleObject.GetClipboardData(dwReserved,
          ppDataObject);
      }

      STDMETHODIMP
      COffCntrDispCtrl::XMyOleObject::InitFromData(LPDATAOBJECT
      pDataObject, BOOL fCreation, DWORD dwReserved)
      {
          METHOD_MANAGE_STATE(COffCntrDispCtrl, MyOleObject)
          ASSERT_VALID(pThis);
          return pThis->m_xOleObject.InitFromData(pDataObject, fCreation,
          dwReserved);
      }

      STDMETHODIMP COffCntrDispCtrl::XMyOleObject::GetMoniker(DWORD
      dwAssign, DWORD dwWhichMoniker, LPMONIKER *ppmk)
      {
          METHOD_MANAGE_STATE(COffCntrDispCtrl, MyOleObject)
          ASSERT_VALID(pThis);
          return pThis->m_xOleObject.GetMoniker(dwAssign, dwWhichMoniker,
          ppmk);
      }

      STDMETHODIMP COffCntrDispCtrl::XMyOleObject::SetMoniker(DWORD
      dwWhichMoniker, LPMONIKER pmk)
      {
          METHOD_MANAGE_STATE(COffCntrDispCtrl, MyOleObject)
          ASSERT_VALID(pThis);
          return pThis->m_xOleObject.SetMoniker(dwWhichMoniker, pmk);
      }

      STDMETHODIMP COffCntrDispCtrl::XMyOleObject::Close(DWORD
      dwSaveOption)
      {
          METHOD_MANAGE_STATE(COffCntrDispCtrl, MyOleObject)
          ASSERT_VALID(pThis);
          return pThis->m_xOleObject.Close(dwSaveOption);
      }

      STDMETHODIMP
      COffCntrDispCtrl::XMyOleObject::GetClientSite(LPOLECLIENTSITE*
      ppClientSite)
      {
          METHOD_MANAGE_STATE(COffCntrDispCtrl, MyOleObject)
          ASSERT_VALID(pThis);
          return pThis->m_xOleObject.GetClientSite(ppClientSite);
      }

      STDMETHODIMP_(ULONG) COffCntrDispCtrl::XMyOleObject::Release()
      {
          METHOD_MANAGE_STATE(COffCntrDispCtrl, MyOleObject)
          ASSERT_VALID(pThis);
          return pThis->m_xOleObject.Release();
      }

      STDMETHODIMP_(ULONG) COffCntrDispCtrl::XMyOleObject::AddRef()
      {
          METHOD_MANAGE_STATE(COffCntrDispCtrl, MyOleObject)
          ASSERT_VALID(pThis);
          return pThis->m_xOleObject.AddRef();
      }

      STDMETHODIMP COffCntrDispCtrl::XMyOleObject::QueryInterface(REFIID
      iid, LPVOID* ppvObj)
      {
          METHOD_MANAGE_STATE(COffCntrDispCtrl, MyOleObject)
          ASSERT_VALID(pThis);
          return pThis->m_xOleObject.QueryInterface(iid, ppvObj);
      }
    This is your implementation of IOleObject, which mostly delegates all of its calls to the default COleControl's IOleObject implementation, except for SetHostNames(). You trap SetHostNames() and store the document name where the control is inserted.

    Unfortunately, Microsoft PowerPoint doesn't call this method, so this example won't work with that product. However, Microsoft Powerpoint is a single-instance server, so you could use GetActiveObject() to uniquely get the IDispatch pointer.
  8. Add the following member functions to your COleControl-derived class:


    9. 
      void COffCntrDispCtrl::GetDocDispatch()
      {
          // No need, if we already have it.
          if(m_pDocDisp != NULL) return;

          // Get a BindCtx.
          IBindCtx *pbc;
          HRESULT hr = CreateBindCtx(0, &pbc);
          if(FAILED(hr)) {
              DoErr("CreateBindCtx()", hr);
              return;
          }

          // Get running-object table.
          IRunningObjectTable *prot;
          hr = pbc->GetRunningObjectTable(&prot);
          if(FAILED(hr)) {
              DoErr("GetRunningObjectTable()", hr);
              pbc->Release();
              return;
          }

          // Get enumeration interface.
          IEnumMoniker *pem;
          hr = prot->EnumRunning(&pem);
          if(FAILED(hr)) {
              DoErr("EnumRunning()", hr);
              prot->Release();
              pbc->Release();
              return;
          }

          // Start at the beginning.
          pem->Reset();

          // Churn through enumeration.
          ULONG fetched;
          IMoniker *pmon;
          int n = 0;
          while(pem->Next(1, &pmon, &fetched) == S_OK) {

              // Get DisplayName.
              LPOLESTR pName;
              pmon->GetDisplayName(pbc, NULL, &pName);
              // Convert it to ASCII.
              char szName[512];
              WideCharToMultiByte(CP_ACP, 0, pName, -1, szName, 512, NULL,
              NULL);

              // Compare it against the name we got in SetHostNames().
              if(!strcmp(szName, m_szDocName)) {

                  DoMsg("Found document in ROT!");

                  // Bind to this ROT entry.
                  IDispatch *pDisp;
                  hr = pmon->BindToObject(pbc, NULL, IID_IDispatch, (void
                  **)&pDisp);
                  if(!FAILED(hr)) {
                      // Remember IDispatch.
                      m_pDocDisp = pDisp;

                      // Notice...
                      sprintf(buf, "Document IDispatch = %08lx",
                      m_pDocDisp);
                      DoMsg(buf);
                  }
                  else {
                      DoErr("BindToObject()", hr);
                  }
              }

              // Release interfaces.
              pmon->Release();

              // Break out if we obtained the IDispatch successfully.
              if(m_pDocDisp != NULL) break;
          }

          // Release interfaces.
          pem->Release();
          prot->Release();
          pbc->Release();
      }

      void COffCntrDispCtrl::TestDispatch()
      {
          ASSERT(m_pDocDisp);

          COleDispatchDriver doc(m_pDocDisp);
          DISPID dispID = 0;
          unsigned short *ucPtr = L"Name";

          // Get DISPID for Name.
          HRESULT hr = m_pDocDisp->GetIDsOfNames(IID_NULL, &ucPtr, 1,
          LOCALE_USER_DEFAULT, &dispID);
          ASSERT(!FAILED(hr));

          // Get Name property.
          CString name;
          doc.GetProperty(dispID, VT_BSTR, &name);
          AfxMessageBox(
              CString("Document name is ") + name,
              MB_SETFOREGROUND
          );
      }
  9. Compile!


Follow these next steps to test your control in Microsoft Excel 97:
  1. Start Microsoft Excel 97.


  2. Bring up the Control Toolbox toolbar (on the View menu, click Toolbars).


  3. Click the far-right hammer & wrench icon in the Control Toolbox toolbar, and select your new control; it should be called OffCntrDisp.


  4. Draw a rectangle in the sheet to insert the control.


    5. RESULTS: You should see the control appear, and shortly afterwards, a message box with "Found document in ROT." Next, you should see another message box displaying something similar to "Document IDispatch = 0043bf8c." Finally, you should see a message box informing you of the name of the document where it was inserted.

© Microsoft Corporation 1999, All Rights Reserved.
Contributions by Joe Crump, Microsoft Corporation

Additional query words: getobject

Keywords : kbAutomation kbExcel kbVC500 kbVC600
Version : WINDOWS:97; winnt:5.0,6.0
Platform : WINDOWS winnt
Issue type : kbhowto


Last Reviewed: October 12, 1999
© 2000 Microsoft Corporation. All rights reserved. Terms of Use.