WD2000: How to Merge Envelopes and Labels When Records Are in One Column

ID: Q212335


The information in this article applies to:
  • Microsoft Word 2000


SUMMARY

Ordinarily, Microsoft Word cannot merge with data when all the information is in one column, as in the following example:


   Joe Howard
   123 Main Street
   Anytown, US  12345 

   Jane Clayton
   Microsoft
   456 Elm Street
   Sometown, US  67890 
Word needs the information to be laid out in a table or in tab-delimited format. Normally, to perform a mail merge, you must first convert the text to a table to use as a data document. To convert the text, you need to have the same number of fields in each record. This becomes increasingly more difficult to accomplish with a large number of records.

This article provides simpler methods for use with envelopes and labels.

NOTE: These methods are useful only when you have an existing document that is laid out in one column and you do not need to merge the information in the future. Using a data document that is laid out in a table provides many more options for merging data, such as the ability to use one data document for merging to different types of documents.

For additional information about converting address information into the table or tab-delimited format that Word needs, click the article number below to view the article in the Microsoft Knowledge Base:
Q212334 WD2000: How to Convert Data in One Column to a Table


MORE INFORMATION

Method 1: For Both Envelopes and Labels

  1. Open the data document and make sure there is no information in the document other than the records and that the records are in the first format shown in the "Summary" section of this article.


  2. At the beginning of the records, add a line that says "MergeRecords" (without the quotation marks).


  3. Press ENTER twice, so that there is a blank line between "MergeRecords" and the first record. For example:


  4. 
        MergeRecords
    
        Joe Howard
        123 Main Street
        Anytown, US  12345
    
        Jane Clayton
        Microsoft
        456 Elm Street
        Sometown, US  67890 
  5. On the Edit menu, click Replace.
    1. Place the insertion point in the Find What box. Click the More button and then the Special button and click Paragraph Mark.


    2. Repeat the previous step so that "^p^p" (without the quotation marks) appears in the Find what box.


    3. In the Replace with box, type an asterisk (*).


    4. Click Replace All.


    5. Click OK.


    6. Click Close.


    Your document should now look like the following:


  6. 
           MergeRecords*Joe Howard
           123 Main Street
           Anytown, US  12345*Jane Clayton
           Microsoft
           456 Elm Street
           Sometown, US  67890 
  7. On the File menu, click Save As. Give the file a new name. Click OK.


  8. On the File menu, click New to create a new, blank document. Click OK.


  9. On the Tools menu, click Mail Merge.


  10. In the Mail Merge Helper dialog box, click Create. Click either Envelopes or Mailing Labels.


  11. Click Active Window.


  12. Click Get Data. Select Open Data Source.


  13. Select the data document that you saved in step 5. Click Open.


  14. In the Field Delimiter box, select (none).


  15. In the Record Delimiter box, select asterisk (*). Click OK.


  16. Click Set Up Main Document.

    If you are setting up labels, make the appropriate selections in the Label Options dialog box that appears. Click OK.


  17. Click Insert Merge Field. Only one field, MergeRecords, is available. Select this field. It appears in the Sample Label box.


  18. Click OK.


  19. Click Merge.


  20. In the Merge To box, click New Document or Printer. Click Merge.


The document should merge successfully.

Method 2: For Envelopes Only

In this method, you do not actually perform any merging. Instead, you reformat the document so that each address is on an envelope-sized page by itself.
  1. On the File menu, click Save As. Give the file a new name. Click OK.


  2. Open the data document and make sure there is no information in the document other than the records and that the records are in the first format shown in the "Summary" section of this article.


  3. On the Edit menu, click Replace.
    1. Place the insertion point in the Find What box. Click the More button and then click the Special button and choose Paragraph Mark.


    2. Repeat the previous step so that "^p^p" (without the quotation marks) appears in the Find What box.


    3. Move the insertion point into the Replace With box. Click Special and choose Manual Page Break.


    4. Click Replace All.


    5. Click OK.


    6. Click Close.




  4. On the File menu, click Page Setup.


  5. Click the Paper Size tab.


  6. In the Paper Size list, select Envelope # 10.


  7. In the Orientation area, select Landscape.


  8. Click the Margins tab.


  9. Change the margins to the following measurements:
    
        Top:   2.5
        Bottom: .5
        Left:  4.0
        Right:  .5 


  10. Click OK. Each record is now on its own envelope.


  11. Click Print.


The envelopes should print successfully.

Additional query words: mmh merging print merge howto label

Keywords : kbdta kbenvelope winword kbmerge wd2000
Version : WINDOWS:2000
Platform : WINDOWS
Issue type : kbinfo


Last Reviewed: January 6, 2000
© 2000 Microsoft Corporation. All rights reserved. Terms of Use.