WD97: Table Borders Misaligned When Printed to 9-Pin Printer

• Microsoft Word 97 for Windows

SYMPTOMS

If you print a document containing table borders to a 9-pin dot matrix printer, the borders of the table may be printed much higher or lower on the page than they should be. The text of the table will be printed in the correct location.

This problem has also been reported when printing the document to some fax drivers.

RESOLUTION

To correct this problem, install Microsoft Word 97 Service Release 1 (SR- 1).

To work around this problem, use the printer metrics setting for the document. If you enable this setting, the document will print correctly to 9-pin printers. To enable this setting, follow these steps:

1. On the Tools menu, click Options.



2. Click the Compatibility tab.



3. Under Options, click to select the "Use printer metrics to lay out document" check box.

STATUS

Microsoft has confirmed this to be a problem in Microsoft Word 97 for Windows. This problem was corrected in Microsoft Word 97 SR-1.

For additional information about SR-1, please see the following article in the Microsoft Knowledge Base:

Q172475 OFF97: How to Obtain and Install MS Office 97 SR-1

MORE INFORMATION

The "Use printer metrics to lay out document" option uses the printer driver information to format the document so that it prints correctly to this particular printer. This is how versions of Word earlier than Word 97 lay out a document for printing. The disadvantage of this method is that the document printout varies depending on the capabilities of the current printer.

In Word 97, the document is printed to a "virtual printer driver." This gives Word 97 the ability to print a document on multiple printers and have the document look the same when it is printed from any printer.

This problem did not occur in earlier versions of Word because earlier versions of Word always use printer metrics to lay out the document.

24-pin dot matrix printers print the table borders correctly in all versions of Word.

The following 9-pin dot matrix printers are affected by this problem:

AT&T 473/478
Brother M-1309
Brother M-1809
Brother M-1818
Brother M-1909
Brother M-1918
Citizen 120D
Citizen 120D+
Citizen 180D
Citizen 200GX
Citizen 200GX/15
Citizen GSX-190
Citizen HSP-500
Citizen HSP-550
Citizen Prodot 9
Citizen Prodot 9x
Citizen Swift 9
Citizen Swift 9x
Citizen Swift 90
Digital LA310
Digital LA70
Digital LA75
Epson AP-2000
Epson AP-2250
Epson AP-2500
Epson DFX-5000
Epson DFX-8000
Epson Compatible 9 Pin
Epson EX-800
Epson EX-1000
Epson FX-80
Epson FX-80+
Epson FX-85
Epson FX-86e
Epson FX-100
Epson FX-100+
Epson FX-105
Epson FX-185
Epson FX-286
Epson FX-286e
Epson FX-800
Epson FX-850
Epson FX-870
Epson FX-1000
Epson FX-1050
Epson FX-1170
Epson JX-80
Epson LX-80
Epson LX-86
Epson LX-100
Epson LX-400
Epson LX-800
Epson LX-810
Epson LX-850
Epson LX-850+
Epson LX-1050
Epson MX-80
Epson MX-80 F/T
Epson MX-100
Epson RX-80
Epson RX-80 F/T
Epson RX-80 F/T+
Epson RX-100
Epson RX-100+
Epson T-750
Epson T-1000
Fujitsu DX 2100
Fujitsu DX 2200
Fujitsu DX 2300
Fujitsu DX 2400
IBM 4226 Model 302
IBM Graphics
Generic IBM Graphics 9pin
Generic IBM Graphics 9pin wide
IBM Personal Printer II 2380
IBM 2380 Plus
IBM Personal Printer II 2381
IBM 2381 Plus
IBM Proprinter
IBM Proprinter II
IBM Proprinter III
IBM Proprinter XL
IBM Proprinter XL II
IBM Proprinter XL III
Mannesmann Tally MT 81
Mannesmann Tally MT 90
Mannesmann Tally MT 130/9
Mannesmann Tally MT 131/9
Mannesmann Tally MT 150/9
Mannesmann Tally MT 151/9
Mannesmann Tally MT 230/18
Mannesmann Tally MT 230/9
Mannesmann Tally MT 290
Mannesmann Tally MT 340
Oki ML 182 Elite (IBM)
Oki ML 192 Elite (IBM)
Oki ML 192 Elite (Microline)
Oki ML 193 Elite (IBM)
Oki ML 193 Elite (Microline)
Oki ML 280 Elite (IBM)
Oki ML 320 Elite (IBM)
Oki ML 320 Elite (Microline)
Oki ML 321 Elite (IBM)
Oki ML 321 Elite (Microline)
Oki ML 520 Elite (IBM)
Oki ML 520 Elite (Microline)
Oki ML 521 Elite (IBM)
Oki ML 521 Elite (Microline)
Oki ML 3410 Elite (IBM)
Okidata ML Pacemark 3410
Okidata ML 92-IBM
Okidata ML 93-IBM
Okidata ML 184-IBM Turbo
Okidata ML 192
Okidata ML 192 Plus
Okidata ML 192-IBM
Okidata ML 193
Okidata ML 193 Plus
Okidata ML 193-IBM
Okidata ML 292
Okidata ML 292-IBM
Okidata ML 293
Okidata ML 293-IBM
Okidata ML 320
Okidata ML 320-IBM
Okidata ML 321
Okidata ML 321-IBM
Okidata ML 520
Okidata ML 520-IBM
Okidata ML 521
Okidata ML 521-IBM
Olivetti DM 95
Olivetti DM 109
Olivetti DM 119
Olivetti DM 209 L
Olivetti DM 309
Olivetti DM 309 S
Olivetti DM 309 L
Olivetti DM 309 SL
Panasonic KX-P1081
Panasonic KX-P1150
Panasonic KX-P1170
Panasonic KX-P1180
Panasonic KX-P1695
Panasonic KX-P2180
Seikosha SP-1900
Seikosha SP-1900+
Seikosha SP-2415
Seikosha SP-2400
Seikosha SP-2000
Star FR-15
Star FR-10
Star LC-10
Star LC-10 Colour
Star LC-15
Star LC-20
Star LC-100 Colour
Star LC-200
Star NL-10
Star NX-1000
Star NX-1000 Rainbow
Star NX-1001
Star NX-1020 Rainbow
Star NX-1500
Star XR-1000
Star XR-1020
Star XR-1500
Star XR-1520
Star ZA-200
Star ZA-250

REFERENCES

For more information about printer metrics, please see the following articles in the Microsoft Knowledge Base:

Q166016 WD97: Word Compatibility Options Described

Q163189 WD97: Text in Shaded Table Missing Printing to NT Servers

Q160068 WD97: Optimizing Microsoft Word 97

Q118586 WD: Footnote Moved to Next Page

Additional query words: SR1 release1 8.0 8.00

Keywords : kbprint word97 kbtable
Version : WINDOWS:97
Platform : WINDOWS
Issue type : kbbug