HOWTO: Retrieve Resultsets from Oracle Stored Procedures

ID: Q174679


The information in this article applies to:
  • Microsoft Visual Basic Enterprise Edition for Windows, versions 5.0, 6.0
  • Microsoft ODBC for Oracle (Build 2.573.2927), version 2.5
  • Microsoft ODBC for Oracle (Build 2.73.7283.03), version 2.0


SUMMARY

This article demonstrates how to use Visual Basic Enterprise Edition, Remote Data Object (RDO), the Microsoft ODBC Driver for Oracle version 2.0 and higher, and an Oracle PL/SQL package to retrieve resultsets from an Oracle stored procedure.


MORE INFORMATION

With the release of the Microsoft ODBC Driver for Oracle version 2.0 and higher, you can now retrieve resultsets from Oracle stored procedures. By creating Oracle stored procedures that return parameters of type TABLE, you can return row and column data that can then be manipulated and displayed as a resultset. This article uses the example in the Help file for the Microsoft ODBC Driver for Oracle v2.0 and shows how to use that example in Visual Basic.

NOTE: The resultsets created by the Microsoft ODBC Driver for Oracle version 2.0 and 2.5 using Oracle stored procedures are READ ONLY and STATIC. To retrieve a resultset requires that an Oracle Package be created.

Before you can start working with the Visual Basic application, you must create an Oracle package called SimplePackage. SimplePackage is taken from the Help File for Microsoft ODBC Driver for Oracle: Advanced Topics: "Returning Array Parameters from Stored Procedures."

The following package definition and package body for SimplePackage need to be added to your Oracle server either through SQL*Plus or through the Data Tools in Visual Basic 5.0 Enterprise edition:

Step 1


    CREATE OR REPLACE PACKAGE SimplePackage AS

      TYPE t_id is TABLE of  NUMBER(5)
       INDEX BY BINARY_INTEGER;

      TYPE t_Course is TABLE of VARCHAR2(10)
       INDEX BY BINARY_INTEGER;

      TYPE t_Dept is TABLE of VARCHAR2(5)
       INDEX BY BINARY_INTEGER;

      TYPE t_pk1Type1 IS TABLE OF VARCHAR2(100)
       INDEX BY BINARY_INTEGER;

      TYPE t_pk1Type2 IS TABLE OF NUMBER(5)
       INDEX BY BINARY_INTEGER;

      PROCEDURE proc1
      (   o_id           OUT  t_id,
            ao_course      OUT  t_Course,
            ao_dept        OUT  t_Dept
      );

      PROCEDURE proc2
        (
            i_Arg1         IN   NUMBER,
            ao_Arg2        OUT  t_pk1Type1,
            ao_Arg3        OUT  t_pk1Type2
      );

    END SimplePackage; 

Step 2


CREATE OR REPLACE PACKAGE BODY SimplePackage AS

      
     PROCEDURE  proc1
        (
            o_id           OUT  t_id,
            ao_course      OUT  t_Course,
            ao_dept        OUT  t_Dept
        )
      AS
      BEGIN

            o_id(1):= 200;
            ao_course(1) :=  'M101';
            ao_dept(1) :=  'EEE' ;

            o_id(2) := 201;
            ao_course(2) :=  'PHY320';
            ao_dept(2) :=  'ECE' ;

      END proc1;

      PROCEDURE proc2
        (
            i_Arg1         IN   NUMBER,
            ao_Arg2        OUT  t_pk1Type1,
            ao_Arg3        OUT  t_pk1Type2
        )
      AS
            i  NUMBER;
    BEGIN

            FOR i IN 1 .. i_Arg1 LOOP
              ao_Arg2(i) := 'Row Number ' || to_char(i);
            END LOOP;

            FOR i IN 1 .. i_Arg1 LOOP
              ao_Arg3(i) := i;
            END LOOP;

      END proc2;

    END SimplePackage; 
Once SimplePackage is loaded and compiled on the Oracle server, you can start working on the Visual Basic application.

Step-by-Step Example

This example project uses a simple form to call the two procedures in the SimplePackage package. Both procedures (Proc1 and Proc2) return arrays (Oracle TABLE data type) that are converted to resultsets by the Microsoft ODBC Driver for Oracle version 2.0 or 2.5. These resultsets are manipulated and displayed in the project using the Remote Data Object. Here are the steps to create the project:
  1. Open a new project in Visual Basic 5.0 Enterprise edition. Form1 is created by default.


  2. Place the following controls on the form:


  3. 
          Control     Name      Text/Caption
          ----------------------------------
          Button      cmdProc1A  Proc1A
          Button      cmdProc1B  Proc1B
          Button      cmdProc2A  Proc2A
          Button      cmdProc2B  Proc2B
          Text Box    txtZero1
          Text Box    txtZero2
          Text Box    txtOne1
          Text Box    txtOne2 
NOTE: The text boxes should be laid out in the following grid format:


      txtZero1           txtOne1
      txtZero2           txtOne2 
  1. From the Tools menu, select the Options item. Click the Default Full Module View option and then click OK. This allows you to view all of the code for this project.


  2. Paste the following code into the General Declarations section of the new form:


  3. 
          Option Explicit
          Dim Cn As rdoConnection
          Dim En As rdoEnvironment
          Dim CPw1 As rdoQuery
          Dim CPw2 As rdoQuery
          Dim CPw3 As rdoQuery
          Dim CPw4 As rdoQuery
          Dim Rs As rdoResultset
          Dim Conn As String
          Dim QSQL As String
    
          Private Sub cmdProc1A_Click()
    
            Set Rs = CPw1.OpenResultset(rdOpenStatic, rdConcurReadOnly)
    
            txtZero1 = Rs(0)
            txtOne1 = Rs(1) & "       " & Rs(2)
    
            Rs.MoveNext
    
            txtZero2 = Rs(0)
            txtOne2 = Rs(1) & "   " & Rs(2)
    
            Rs.Close
    
            MsgBox "Done"
    
          End Sub
    
          Private Sub cmdProc1B_Click()
    
            Dim tempOne1 As String
            Dim tempOne2 As String
    
            Set Rs = CPw2.OpenResultset(rdOpenForwardOnly, rdConcurReadOnly)
    
            txtZero1 = Rs(0)
    
            Rs.MoveNext
    
            txtZero2 = Rs(0)
    
            Rs.MoreResults
    
            tempOne1 = Rs(0)
    
            Rs.MoveNext
    
            tempOne2 = Rs(0)
    
            Rs.MoreResults
    
            txtOne1 = tempOne1 & "       " & Rs(0)
    
            Rs.MoveNext
    
            txtOne2 = tempOne2 & "   " & Rs(0)
    
             Rs.Close
    
            MsgBox "Done"
    
          End Sub
    
          Private Sub cmdProc2A_Click()
    
            CPw3(0) = 2
            Set Rs = CPw3.OpenResultset(rdOpenForwardOnly, rdConcurReadOnly)
    
            txtZero1 = Rs(0)
            txtOne1 = Rs(1)
    
            Rs.MoveNext
    
            txtZero2 = Rs(0)
            txtOne2 = Rs(1)
    
            Rs.Close
    
            MsgBox "Done"
    
           End Sub
    
          Private Sub cmdProc2B_Click()
    
            CPw4(0) = 2
            Set Rs = CPw4.OpenResultset(rdOpenForwardOnly, rdConcurReadOnly)
    
            txtZero1 = Rs(0)
    
            Rs.MoveNext
    
            txtZero2 = Rs(0)
    
            Rs.MoreResults
    
            txtOne1 = Rs(0)
    
            Rs.MoveNext
    
            txtOne2 = Rs(0)
    
            Rs.Close
    
            MsgBox "Done"
    
          End Sub
    
          Private Sub Form_Load()
    
            Conn = "UID=<user ID>;PWD=<password>;"_
                & "driver={Microsoft ODBC for Oracle};SERVER=RonOracle;"
    
            Set En = rdoEnvironments(0)
            En.CursorDriver = rdUseOdbc
            Set Cn = En.OpenConnection("", rdDriverNoPrompt, False, Conn)
    
            QSQL = "{call SimplePackage.Proc1({resultset 3, o_id , " _
                   & "ao_course, ao_dept})}"
            Set CPw1 = Cn.CreateQuery("", QSQL)
    
            QSQL = "{call SimplePackage.Proc1({resultset 3, o_id}, " _
                   & "{resultset 3, ao_course}, {resultset 3, ao_dept})}"
            Set CPw2 = Cn.CreateQuery("", QSQL)
    
            QSQL = "{call SimplePackage.Proc2(?,{resultset 3, ao_Arg2," _
                   & " ao_Arg3})}"
            Set CPw3 = Cn.CreateQuery("", QSQL)
    
            QSQL = "{call SimplePackage.Proc2(?,{resultset 3, ao_Arg2}, " _
                   & "{resultset 3, ao_Arg3})}"
            Set CPw4 = Cn.CreateQuery("", QSQL)
    
          End Sub
    
          Private Sub Form_Unload(Cancel As Integer)
    
            En.Close
    
          End Sub
     
  4. Run the project.


  5. Note that the array returned by the stored procedure is being turned into an RDO resultset. The code in this example is fairly standard except for the creation and execution of the Oracle stored procedures.

    The query objects created in the code each do something a little different. The first one is the simplest and probably the most common way to call this type of stored procedure:
    
    QSQL = "{call SimplePackage.Proc1({resultset 3, o_id , " _
                & "ao_course, ao_dept})}" 
    Within the call statement, you must supply the keyword RESULTSET followed by the maximum number of rows you will be returning.

    NOTE: If you return more than the maximum specified, you get an error. If you return less, everything works fine.

    After the resultset keyword and maximum number of rows, this form of the call statement supplies the stored procedure parameter list. Each parameter is actually an array (or Oracle TABLE variable) containing all of the elements for a given column of a resultset. In this example (Proc1), there are three columns in the returning resultset represented by the three arrays o_id, ao_course, and ao_dept.

    NOTE: This parameter list needs to appear exactly as it does in the stored procedure.

    The next query object does something different:
    
    QSQL = "{call SimplePackage.Proc1({resultset 3, o_id}, " _
                & "{resultset 3, ao_course}, {resultset 3, ao_dept})}" 
    This form of the call statement is actually creating three resultsets; one for each column in the original (or returning) resultset. Note that you must use the keyword RESULTSET and the maximum number of rows for each resultset. This form of the call statement is actually giving the resultset for each array declared in the parameter list.

    The next query object is taking in an input parameter and then returning resultset as before:
    
    QSQL = "{call SimplePackage.Proc2(?,{resultset 3, ao_Arg2," 
                & " ao_Arg3})}" 
    Note that not much has changed. An input placeholder (?) has been added to the beginning of the parameter list, where it must be if it is to be used.

    The last form of the call statement is the multiple result example from above with an input placeholder added to the parameter list:
    
    QSQL = "{call SimplePackage.Proc2(?,{resultset 3, ao_Arg2}, " _
                & "{resultset 3, ao_Arg3})}" 
    Once the query object is defined, everything else in the project is standard RDO; setting input and output parameters, moving within the RDO resultsets, and moving between resultsets.


REFERENCES

Help file for Microsoft ODBC Driver for Oracle: Advanced Topics: "Returning Array Parameters from Stored Procedures"

Visual Basic 5.0 Enterprise Documentation: The Guide to Building Client/Server Applications with Visual Basic: Data Access Options: "Remote Data Objects (RDO) - Chapter 11"

For more information on working with RDO 2.0 and Oracle, please click on the article number below to see the article in the Microsoft Knowledge Base:

Q167225 HOWTO: Access an Oracle Database Using RDO

© Microsoft Corporation 1999, All Rights Reserved.
Contributions by Sam Carpenter, Microsoft Corporation

Additional query words:

Keywords : kbDatabase kbDriver kbODBC kbOracle kbRDO kbVBp kbVBp500 kbVBp600 kbDSupport
Version : WINDOWS:2.5,5.0,6.0
Platform : WINDOWS
Issue type : kbhowto


Last Reviewed: August 24, 1999
© 2000 Microsoft Corporation. All rights reserved. Terms of Use.