Using a Wacom HD-648A Tablet with Pen Windows

• Microsoft Windows for Pen Computing, version 1.0

SUMMARY

To use a Wacom HD-648A tablet with Windows for Pen Computing, you must modify options on the hardware menu. The information below lists the settings necessary for the tablet to be compatible with Pen Windows.

MORE INFORMATION

Perform the following six steps to set up the tablet:

1. Activate the Wacom settings menu by gently resting the tip of the pen against the screen and pressing the RESET button under the top of the tablet.
   
   The Wacom menu will appear with three choices:

   PEN ADJ -- Adjust the arrow cursor with the tip of the pen
   FUNC SET -- Main settings menu
   JAP/ENG -- Japanese or English menus




2. Choose FUNC SET. Another menu appears:

   TABLET | VIDEO | BACK LIGHT | MACRO | MAINTENANCE




3. Choose the TABLET menu and modify each of the parameters as follows:

   COMM = WACOMHD
   FORMAT = BIN
   MODE = STREAM
   COORD = ABS
   ALWAYS = DSB
   BAUDRATE = 19200
   PARITY = NONE
   STOP BIT = 1
   DATA BIT = 8
   TRMNTR = CRLF
   REPORT RATE = 100
   MM/INCH = INCH
   BUZZER = OFF
   ORIGIN = UPPER LEFT
   DSR = DSB




4. Choose the VIDEO menu and modify each of the parameters as follows:

   RGB SIGNAL = G (disregard R and B)
   DISPLAY MODE = POS
   MODEL = PS/2




5. Choose the BACK LIGHT menu and modify each of the parameters as follows:

   AUTO LIGHT OFF TIME = 5min
   BRIGHT ON LIGHT OFF = 10%




6. Choose the MAINTENANCE menu and modify each of the parameters as follows:

   HORIZON = 45
   VERTICAL = 33
   PLL.CNT = 94
   DOTDLCOK = DOWN
   ANALOG RGB LEVEL
   R = 18
   G = 18
   B = 18

Additional query words: 1.00

Keywords :
Version : :1.0
Platform :
Issue type :