TCP/IP Stack for Workgroups Add-On 3.11 Fails to Load

ID: Q115835

The information in this article applies to:

Microsoft Workgroups Add-On version 3.11

SYMPTOMS

The setup procedure of the TCP/IP stack for Windows for Workgroups 3.11 to Workgroups Add-On version 3.11 does not prompt for the default gateway, IP address, and Subnet mask. As a result, TCP/IP stack fails to load.

RESOLUTION

After setup of TCP/IP is complete, do the following:

Add the following three lines to the [TCPIP] section of the PROTOCOL.INI file:
```
   DefaultGateway0= <default gateway address>
   SubnetMask0= <subnet mask>
   IPAddress0= <IP address> 
```
NOTE: Each octet above must be separated by a space.

Save the PROTOCOL.INI file and reboot the workstation.

Additional query words: wfw wfwg 3.11

Keywords : NTInterop ntprotocol
Version :
Platform : WINDOWS
Issue type :