After RPLCMD Is Used, "Required" Is Misspelled

ID: Q149414

The information in this article applies to:

Microsoft Windows NT Server versions 3.5, 3.51

SYMPTOMS

When you use the RPLCMD to set the password options for a remoteboot client from the default "optional" to "required," the outcome is misspelled "requred."

CAUSE

The problem appears to be a misspelling in the code for the line:

RemoteBoot password is required

Steps to Reproduce

Run RPLCMD at a command prompt.

Select "W" at:
Adapter Boot Config Profile Service Vendor Wksta [Quit]:

Select "S" at:
Add Clone Del Enum GetInfo SetInfo:

Select "2" at:
Information Level <0, 1 or 2> =

Select "any RPL workstation" at:
Input WkstaName =

Select "any new RPL workstation" at:
WkstaName =

Leave WkstaNameComment blank

Select "R" at:
Is Remoteboot password Required, Optional or Not solicited [R,O,N] =

Leave defaults on all other items

After SetInfo has completed, select "W" at:
Adapter Boot Config Profile Service Vendor Wksta [Quit]:

Select "G" at:
Add Clone Del Enum GetInfo SetInfo:

Select "2" and "WkstaName" at:
Input Information Level <0, 1 or 2> and WkstaName

The misspelled word "requred" is on the second line of the displayed information.

RESOLUTION

There is no resolution at this time.

STATUS

Microsoft has confirmed this to be a problem in Windows NT versions 3.5 and 3.51. We are researching this problem and will post new information here in the Microsoft Knowledge Base as it becomes available.

Additional query words: prodnt

Keywords : NTInterop
Version : winnt:3.5,3.51
Platform : winnt
Issue type :