How To Configure Windows 95 to Dial into a RAS/RRAS Server Using TCP/IP

• Microsoft Windows NT Server, Enterprise Edition version 4.0
• Microsoft Cluster Server
• Microsoft BackOffice Small Business Server versions 4.0, 4.0a

SUMMARY

This article discusses a step-by-step procedure that ensures Windows 95 TCP/IP client platforms will successfully dial, get connected, and log on to a computer running Windows NT Server version 4.0 Remote Access Service (RAS) or Routing and Remote Access Service (RRAS). These steps also enable the Windows 95 Dial- Up Networking (DUN) Client to successfully browse the network beyond the RAS or RRAS Server.

MORE INFORMATION

NOTE: The following information assumes that RAS/RRAS has been installed and configured to support Dial-up Clients using TCP/IP and allows access to the entire network.

1. Upgrade your Windows 95 DUN client to the latest version, which can be found at the following location:

   http://www.microsoft.com/windows/downloads/default.asp

   NOTE: On this page, select Product or Feature as Windows 95, and select Category as Networking and Communications. Then, click Go.



2. If there is a network interface card (NIC) in your Windows 95 DUN Client, create a hardware profile that disables the NIC.
   
   For more information, see the following article in the Microsoft knowledge base:

   Q141600 How to Manually Create Hardware Profiles for Laptop Computers





Q150053 Erratic Domain Logon from Windows 95 Dial-Up Networking

NOTE: Microsoft Windows 95 disables the hardware bus slot. If you have a multi-function NIC/Modem, you will disable both functions. OSR2 has the capability to disable the individual function of the card instead of the entire bus.

If Windows 95 is loaded on a laptop with docking station, undocking will accomplish the same result as a hardware profile. If the NIC is a PC Card, simply remove the card from the PCMCIA slot.


3. Domain authentication and browsing only occur when the Windows 95 DUN Client can find the primary domain controller (PDC) for the Windows NT domain. The following two things must exist for this to occur:
   
   
   1. NetBIOS Name Resolution must be implemented. This is accomplished by either installing a Windows Internet Name Service (WINS) Server on the network or using an Lmhosts file to resolve the NetBIOS name of the PDC. This is used for both domain validation and obtaining a browse list.
   
   
   
   2. The Windows 95 workgroup name must be the same as the Windows NT domain name. This is defined in the Network Identification Tab in Network Neighborhood properties.
   
   
   
   For more information, see the following article in the Microsoft knowledge base:

   Q150800 Domain Browsing with TCP/IP and LMHOSTS Files

Additional query words:

Keywords : kbinterop kbnetwork ntras win95 NTInterop nthowto ntnetserv NTSrvWkst
Version : WinNT:4.0;Windows:95
Platform : WINDOWS
Issue type : kbprb