How to Configure Exchange or Other SMTP with Proxy Server

ID: Q181420

The information in this article applies to:
  • Microsoft Proxy Server version 2.0
  • Microsoft Exchange Server, versions 4.0, 5.0, 5.5

SUMMARY

This step by step guide is intended to be an addendum to the Microsoft Proxy Server 2.0 release notes.

The Server Proxy feature allows you to place a server, such as a Microsoft Exchange Server computer using the Internet Mail Service (Internet Mail Connector in Exchange version 4.0), on your private network behind Microsoft Proxy Server. With this configuration, an Exchange Server computer can provide Internet mail service by using the WinSock Proxy client and relying on features of Proxy Server 2.0 for protection. In addition, the Exchange Server computer does not require an additional registered Internet IP address.


MORE INFORMATION

How Server Proxy Works

The WinSock Proxy client allows you to bind services or applications to the external network interface of the server computer running Microsoft Proxy Server. After a service or application is bound on the external network interface, it is then available to hosts on the Internet. The Proxy Server computer then "listens" for connections on behalf of the service or application.

For example, if you bind an internal SMTP/POP mail server to the proxy server, mail clients or SMTP servers on the Internet can contact this mail server by connecting to the proxy server's Internet IP address. To remote computers on the Internet, these services appear to be running on the proxy server computer.

To Set Up the Server Proxy Feature for Exchange Server 4.0 - 5.5

These instructions must be followed exactly as stated, otherwise Exchange will not function with the Server Proxy feature.
  1. Install and configure the Microsoft Proxy Server.


  2. In the Winsock Proxy properties, select CLIENT CONFIGURATION. Find the "Client Connects to Microsoft Winsock Proxy Server by.." option, and set this to IP ADDRESS.


  3. Install the WinSock Proxy (WSP) client on the Exchange Server computer. If the WSP client is already installed, REINSTALL IT. This can be done by connecting to the MSPCLNT share on the proxy server and executing Setup.exe from the root directory.


  4. Change the Domain Name Service (DNS) settings on the Exchange Server computer. An Internet DNS server address MUST BE DEFINED on the Exchange Server computer, or the Exchange Server computer will not be able to send mail correctly.

    In Control Panel, double-click Network and then select TCP/IP. Click the DNS tab. Add your Internet Service Provider's DNS server address(es) here. If your DNS server does not seem to function properly, try using the Microsoft Network DNS servers to test name resolution: 
    
204.255.246.17
204.255.246.18


  5. Test the WSP client on the Exchange Server computer. Open an MS-DOS prompt window and type: 
    
FTP FTP.MICROSOFT.COM
    You should see a response similar to the following if the WinSock Proxy client is functioning: 
    
Connected to ftp.microsoft.com.
220 ftp Microsoft FTP Service (Version 3.0).
User (ftp.microsoft.com:(none)):


  6. After the WinSock Proxy client is working, additional settings are required for server proxy on the Exchange Server computer. You must create two Wspcfg.ini files for the Exchange Server computer.

    Create the first Wspcfg.ini file for use with the Exchange SMTP service. Copy and paste the four lines of information below into Notepad (do not manually type the information) and save this file as Wspcfg.ini in the directory where Msexcimc.exe is located.

    NOTE: Do NOT save the file in Unicode format. The SMTP port (25) on the Exchange Server computer will then be bound to the Proxy Server's port 25. On computers with Internet Information Server version 4.0 (IIS), stop and disable the SMTP service from starting. The SMTP service, an optional Windows NT Option Pack service, also uses port 25. Copy only the four lines of text below; do not copy the blank lines above or below.


    7. 
      [MSEXCIMC]
      ServerBindTcpPorts=25
      Persistent=1
      KillOldSession=1
    NOTE: The SMTP port (25) on the Exchange Server computer will then be bound to the proxy server's port 25.

    Create the second Wspcfg.ini file for use with the Exchange information store (Store.exe). Copy and Paste the four lines of information below into Notepad (DO NOT MANUALLY TYPE THE INFORMATION) and save this file as Wspcfg.ini in the directory where Store.exe is located.

    NOTE: Do NOT save the file in Unicode format. 
    
      [STORE]
      ServerBindTcpPorts=110,119,143
      Persistent=1
      KillOldSession=1
    NOTE: Additional ports, such as ports 119 and 143 shown above, can be listed because Store.exe provides Network News Transfer Protocol (NNTP) on port 119, POP mail on port 110, and so on.

    NOTE: When you configure the Exchange Server to use IMAP4 mail or secure mail, Exchange Server connects to ports 993 and 995 on the Proxy Server. To make this work, edit the Wspcfg.ini file located in the folder where the Exchange Store.exe file is located. These port must be bound to the external interface on the Proxy Server. The changes to the Wspcfg.ini file are as follows: 
    
[Store]
ProxyBindIp=993:<PROXY_SERVER_ADDRESS>,995:<PROXY_SERVER_ADDRESS>
ServerBindTCPPorts=993,995
KillOldSession=1
Persistent=1
  7. Verify that the two Wspcfg.ini files do NOT have a .txt extension appended. This will occur if your Internet Explorer interface settings are set to default values. The file may appear as Wspcfg.ini.txt. Rename the file if necessary.


  8. If you are NOT using Access Control on the Winsock Proxy service, go to step 10.

    If Access Control is enabled on the Winsock Proxy service, you must grant the user account that starts the Exchange services access to the Proxy server.

    This must be a domain user account, not a local account on the Exchange Server computer. If it is a local account, create a new user account on the domain. Open Control Panel and double-click Services, and then grant the new domain user account logon rights to all of the Exchange services.


  9. Give the new domain user account access to the proxy server. In the Winsock Proxy properties, select Permissions and give the new account the Unlimited Access right.


  10. Restart the Exchange Server computer.


  11. After the Exchange Server computer is restarted, it should automatically be listening on the external interface of the Proxy Server computer.


  12. To test connectivity to the Exchange services from a computer that is directly connected to the Internet, do the following:
    1. On the test computer, click Start, and then click Run. Open Telnet.exe.


    2. Select Connect, and then Remote System. 
      
HOST NAME: External IP address of the proxy server      
PORT:        25      
TERM TYPE: vt100


    3. After you are connected, you see a blank screen. Press the ENTER key and wait about 30 seconds. You should see a message from the Exchange SMTP service indicating a good setup. If not, re-check your settings.


    4. You can also try port 110 to test the POP service.




To Configure Your DNS Mail Exchange (MX) Record

If you are using your Internet Service Provider's (ISP) DNS server, you must contact the ISP and ask to add an MX and A record for your domain, so other Internet mail servers can contact your Exchange Server computer.

  1. Your MX and A DNS resource records must refer to the IP address of the proxy server's external network adapter and NOT the internal IP address of the Exchange Server computer or SMTP server itself.

    For example, if your registered Internet domain name is microsoft.com, and your internal Exchange Server computer uses a DNS host name of "exchange1", you need to use an MX, or mail exchange, record to provide other Internet hosts the name of your internal Exchange Server computer. In this case, an MX record added in the microsoft.com zone can provide this information as follows: 
    
microsoft.com IN MX 10 exchange1.microsoft.com
    You then need to create an A, or address, record for exchange1.microsoft.com that uses an external IP address of the proxy server. If the external IP address of your proxy server is 172.16.0.0, you add the following A record to the microsoft.com zone: 
    
exchange1.microsoft.com       IN A 172.16.0.0
    In addition, you can add or create a PTR, or pointer, record to the microsoft.com zone to provide reverse lookup. A valid PTR record to do this is: 
    
0.0.16.172.in-addr.arpa   IN PTR exchange1.microsoft.com


Testing the Configuration

To verify that the computer running Microsoft Exchange Server and the computer running Proxy Server are configured properly, use the following procedure. If you perform each step successfully, the servers are configured properly.

  1. Send a message from an e-mail client that is connected to the computer running Microsoft Exchange Server to an e-mail client that is past the computer running Proxy Server.


  2. Send a message from an e-mail client that is past the computer running Proxy Server to an e-mail client that is connected to the computer running Microsoft Exchange Server.


  3. Use the Telnet tool to connect to the computer running Microsoft Exchange Server and send a message to the server. To do so, follow these steps:
    1. Type telnet at a command prompt, and then press ENTER.


    2. On the Connect menu, click Remote System.


    3. In the Host Name box, type the fully qualified domain name (FQDN) of the computer running Microsoft Exchange Server. The FQDN should be in the following format: 
      
<host>.<domain>.<top-level>
      where <host> is the server's host name, <domain> is the Microsoft Exchange Server organization name, and <top-level> is the top-level domain name. For example, ex1.microsoft.com.


    4. In the Port box, type 25, and then click Connect. If you can connect to the server, proceed to step E. If you are unable to connect to the server, verify that inbound packet filtering and DNS name resolution are functioning properly, and then try again.


    5. Type the following commands, pressing ENTER after each command: 
      
helo <host1>.<domain1>.<top-level1>
mail from <user2>@<domain2>.<top-level2>
rcpt to: <user1>@<domain1>.<top-level1>
data
This is a test.
.
quit
      where <host1> is the server's host name; <user1>, <domain1>, and <top-level1> are the recipient's user, organization, and top-level domain names; and <user2>, <domain2>, and <top-level2> are the sender's user, organization, and top-level domain names.


    6. Reply to the message you sent in step E.


    7. Reply to the message you sent in step F.




Other Third-Party SMTP Servers



The server proxy setup instructions above also apply to other third-party SMTP mail servers, with the exception of step #6. Other SMTP servers have slightly different Wspcfg.ini settings. See Microsoft Knowledge Base article Q177153, "Additional Proxy Server 2.0 Configurations." This article contains Wspcfg.ini settings for other products, including SMTP servers.

If dynamic packet filtering is enabled on the proxy server (this is recommended), the proxy server dynamically opens all necessary ports when they are requested. No special configuration is needed.

It is not necessary to configure a DNS address on other proxy clients. This is only required on the Exchange Server computer.

Additional query words: xadm proxysvr lotus notes ccmail cc:mail prodprx2

Keywords :
Version : winnt:2.0,4.0,5.0,5.5
Platform : winnt
Issue type : kbhowto


Last Reviewed: December 29, 1999
© 2000 Microsoft Corporation. All rights reserved. Terms of Use.