Problem Using Same IP address for RAS and Network Card

• Microsoft Windows NT Workstation versions 3.5, 3.51, 4.0
• Microsoft Windows NT Server versions 3.5, 3.51, 4.0
• Microsoft Windows 2000 Professional
• Microsoft Windows 2000 Server
• Microsoft Windows 2000 Advanced Server

SUMMARY

When you configure a network adapter card driver (including the MS Loopback driver) under Windows NT 3.51 to use the same IP address as the IP address of your RAS connection, you are unable to send network traffic over the RAS connection.

This is not true under Windows NT 3.5.

MORE INFORMATION

The configuration mentioned above does not work under Windows NT 3.51 by design. A RAS PPP connection is a distinct interface from the network card or the MS Loopback adapter driver. Therefore, a unique IP address is required for both the LAN interface and the PPP connection. You are able to use the same IP address under Windows NT 3.5 due to a problem with the RASIPHLP.DLL file. This problem was corrected in Windows NT version 3.51.

If you are not running the TCP/IP protocol on your local LAN, you are not required to bind TCP/IP to your network card. To disable the TCP/IP binding to the network card, run Control Panel and choose Network.

If you are required to use the TCP/IP protocol to participate on your local LAN, you must assign an IP address to your network card that is different than the IP address you are using for your RAS PPP connection.

Additional query words: route Internet prodnt

Keywords : kbnetwork ntras nttcp NTSrvWkst
Version : WINDOWS:2000; winnt:3.5,3.51,4.0
Platform : WINDOWS winnt
Issue type :