Automatically Reset DHCP Leases for Win95/WinNT/WFWG Clients

ID: Q154488

The information in this article applies to:
  • Microsoft Windows NT Server versions 3.5, 3.51, 4.0
  • Microsoft Windows NT Workstation versions 3.5, 3.51, 4.0
  • Microsoft Windows 95
  • Microsoft Windows for Workgroups
  • Microsoft Windows 2000 Professional
  • Microsoft Windows 2000 Server
  • Microsoft Windows 2000 Advanced Server

SYMPTOMS

If a scope is removed in DHCP Manager and another scope is defined, Microsoft-based DHCP clients will not automatically renew their lease to conform to the new scope.


CAUSE

The DHCP clients will not renew their leases automatically until half of the lease time has expired. Microsoft DHCP Server cannot force clients to renew their leases when the DHCP scope has changed.


RESOLUTION

There are two ways the DHCP client computers will renew their leases automatically:

  • Wait until half of the allotted lease time expires. The clients will then renew their leases automatically.


  • Force a DHCP client to renew its lease by doing one of the following:


    • On a Windows NT Workstation or Server or a Windows for Workgroups 3.11 DHCP client, use the Ipconfig.exe utility with the /RENEW option at a command prompt:

      ipconfig /renew

      -or-


    • On a Windows 95 DHCP client, use the Winipcfg.exe utility. On the Start menu, choose Run and type the following and click OK:

      winipcfg

      In the dialog box, select the RENEW option.

      NOTE: The Ipconfig.exe tool included with Windows NT Server in the Clients folder for WFW does not work with windows 95/98 computers. Instead, use the Ipconfig.exe tool from an installation of Windows 98 (it works for Windows 95 clients as well).


In networked environments with a very large number of clients, the preferred method to force clients to renew their leases is to use the IPCONFIG /RENEW command in an Windows NT login script. This method works correctly in a Windows NT and Windows for Workgroups 3.11 networking environment.

However, with the introduction of Windows 95, the command-line option is no longer available. Use the Ipconfig.exe utility from Windows for Workgroups 3.11. This utility works correctly with Windows 95 computers and the IPCONFIG /RENEW option can once again be used for these computers.

The following is an example of a Windows NT login script for automatically renewing DHCP clients, assuming Ipconfig.exe from Windows for Workgroups 3.11 is on \\Server\Win95. For this example, drive letter Y was used. Any available drive letter can be used for this purpose.
NET USE Y: \\SERVER\WIN95
IF EXIST C:\WINDOWS\IPCONFIG.EXE IPCONFIG.EXE /RENEW ;WFW
IF EXIST C:\WINNT35\SYSTEM32\IPCONFIG.EXE IPCONFIG.EXE /RENEW ;WINNT
IF EXIST C:\WINDOWS\WINIPCFG.EXE Y:\IPCONFIG.EXE /RENEW ;WIN95
NET USE Y: /d ; Deleting the drive letter mapping

Additional query words: prodnt

Keywords : kbnetwork nttcp
Version : WINDOWS:2000,95; winnt:3.5,3.51,4.0
Platform : WINDOWS winnt
Issue type :


Last Reviewed: January 21, 2000
© 2000 Microsoft Corporation. All rights reserved. Terms of Use.