The information in this article applies to:
SYMPTOMSA client connected to an Ethernet switch may not receive a renewed DHCP IP address during startup. Releasing and renewing the IP address manually works. CAUSE
Some Ethernet switches have a feature that checks ports for a loop
condition when ports become active (this is the learning mode for spanning
tree algorithm). If a loop is found, traffic is not allowed across the
port. This process of checking for a loop condition takes approximately 10-
15 seconds during which the Windows NT Workstation computer appears to be
on the network, yet no traffic is being passed. Additionally, some newer switch features such as Port Trunking or Port Aggregation may increase the problem. The DHCPREQUEST packet
(along with any other traffic during that time) is lost.
RESOLUTION
To resolve this problem, disable the spanning tree algorithm feature of
your Ethernet switch. This may not be necessary on all manufactures
switches, some vendors may allow you to simply move spanning tree
initialization to the background. This enables the switch port to almost
immediately become functional, but still preform spanning tree discovery in
the background (non-blocking). Please note that spanning tree is only
necessary on ports that connect to other switches (or bridges). Additionally, if Port Trunking or Port Aggregation is enabled on ports attched to DHCP clients, then either disable these features or convert the client to a static IP address if these features are required. Ports that
have only clients connected do not need spanning tree enabled. For
information on how to do this, please contact the switch manufacturer.
Additional query words: prodnt renew catalyst
Keywords : kbnetwork nthowto nttcp NTSrv |
Last Reviewed: February 2, 2000 © 2000 Microsoft Corporation. All rights reserved. Terms of Use. |