How to Enable IPSec Traffic Through a Firewall

ID: Q233256

The information in this article applies to:

Microsoft Windows 2000 Advanced Server
Microsoft Windows 2000 Datacenter Server
Microsoft Windows 2000 Professional
Microsoft Windows 2000 Server

SUMMARY

IP Security (IPSec) is used to securely transmit data between computers. It is implemented at the Networking layer (Layer 3) of the Open Systems Interconnection (OSI) model. This provides protection for all IP and upper-layer protocols in the TCP/IP protocol suite. The primary benefit of securing information at Layer 3 is that all programs and services using IP for data transport can be protected.

MORE INFORMATION

IPSec does not disturb the original IP header and can be routed as normal IP traffic. Routers and switches in the data path between the communicating hosts simply forward the packets to their destination. However, when there is a firewall or gateway in the data path, IP forwarding must be enabled at the firewall for the following IP protocols and UDP ports:

IP Protocol ID 50:
For both inbound and outbound filters. Should be set to allow Encapsulating Security Protocol (ESP) traffic to be forwarded.

IP Protocol ID 51:
For both inbound and outbound filters. Should be set to allow Authentication Header (AH) traffic to be forwarded.

UDP Port 500:
For both inbound and outbound filters. Should be set to allow ISAKMP traffic to be forwarded.

L2TP/IPSec traffic looks just like IPSec traffic on the wire. The firewall just has to allow IKE (UDP 500) and IPSec ESP formatted packets (IP protocol = 50).

Additional query words:

Keywords : kbenv kbnetwork
Version : WINDOWS:2000
Platform : WINDOWS
Issue type : kbinfo