The information in this article applies to:
SUMMARYThis article describes Terminal Server error messages 3100 to 3199. MORE INFORMATIONError 3100Explanation: A software error occurred. Action: Contact technical support. Error 3101Explanation: This message should occur only on a down-level computer. Any action to correct the problem should be performed on that computer. The system required more of a resource than was available. Action: Change the value of the listed option in the configuration file to allow the system to access more of the resource. Error 3102Explanation: This message should occur only on a down-level computer. Any action to correct the problem should be performed on that computer. A software error occurred. Action: Contact technical support. Error 3103Explanation: This message should occur only on a down-level computer. Any action to correct the problem should be performed on that computer. A software error occurred. Action: Contact technical support. Error 3104Explanation: This message should occur only on a down-level computer. Any action to correct the problem should be performed on that computer. A software error occurred. Action: Contact technical support. Error 3105Explanation: This message should occur only on a down-level computer. Any action to correct the problem should be performed on that computer. A software error occurred. Action: Contact technical support. Error 3106Explanation: A software error occurred. Action: Contact technical support. Error 3107Explanation: This message should occur only on a down-level computer. Any action to correct the problem should be performed on that computer. A program or command could not run because LAN Manager is not started or installed. Action: Check that LAN Manager is installed and that the Workstation service is started. Then type the command again. Error 3108Explanation: This message should occur only on a down-level computer. Any action to correct the problem should be performed on that computer. A software error occurred. Action: Contact technical support. Error 3109Explanation: This message should occur only on a down-level computer. Any action to correct the problem should be performed on that computer. A software error occurred. Action: Contact technical support. Error 3110Explanation: This message should occur only on a down-level computer. Any action to correct the problem should be performed on that computer. A software error occurred. Action: Contact technical support. Error 3111Explanation: This message should occur only on a down-level computer. Any action to correct the problem should be performed on that computer. A software error occurred. Action: Contact technical support. Error 3112Explanation: A software error occurred. Action: Contact technical support. Error 3113Explanation: A software error occurred. Action: Contact technical support. Error 3114Explanation: This message should occur only on a down-level computer. Any action to correct the problem should be performed on that computer. The error log is full, and one or more error log entries have been lost. Action: If you want to save the current error log file, copy it to another filename. Then clear the error log. You may do this remotely with Event Viewer. Error 3120Explanation: This message should occur only on a down-level computer. Any action to correct the problem should be performed on that computer. The server's main information segment is larger than the largest segment that can be allocated. Action: Decrease the values for one or more of the following entries in the server's configuration file: MAXCHDEVJOB MAXCONNECTIONS MAXOPENS MAXCHDEVQ MAXLOCKS MAXSHARES MAXCHDEVSThen, restart the Server service. Error 3121Explanation: This message should occur only on a down-level computer. Any action to correct the problem should be performed on that computer. The server cannot increase the size of a memory segment. Action: Be sure that the MEMMAN entry in the server's CONFIG.SYS file allows swapping and that there is at least 1 megabyte of free space on the swap disk. The swap disk is specified by the SWAPPATH entry in the Config.sys file. You could also decrease the value of the NUMBIGBUF entry in the server's configuration file. Error 3122Explanation: This message should occur only on a down-level computer. Any action to correct the problem should be performed on that computer. The user accounts database, Net.acc, is missing, damaged, or in a format that is incompatible with this version of LAN Manager. Action: Copy the backup file, Netacc.bkp, to Net.acc. If Netacc.bkp does not exist, copy Net.acc or Netacc.bkp from a backup floppy or from the LAN Manager distribution disks. If you have upgraded your LAN Manager software, you may need to convert the user accounts database to a new format. See the instructions that came with your upgrade. Error 3123Explanation: This message should occur only on a down-level computer. Any action to correct the problem should be performed on that computer. All networks named in the SRVNETS entry of the server's configuration file must use the LAN Manager workstation software. Action: Be sure that all networks named in the SRVNETS entry of the server's configuration file are also named in the WRKNETS entry of that file. Error 3124Explanation: This message should occur only on a down-level computer. Any action to correct the problem should be performed on that computer. The configuration entries CHARWAIT, CHARTIME, and CHARCOUNT must all be zero or must all have non-zero values. Action: Correct the entries and restart the Server service. Error 3125Explanation: This message should occur only on a down-level computer. Any action to correct the problem should be performed on that computer. The server received an invalid request to run a command. The request may have been damaged by the network. Action: No action is needed. If this error occurs frequently, contact technical support. Error 3126Explanation: This message should occur only on a down-level computer. Any action to correct the problem should be performed on that computer. The server found a resource shortage in a network driver when it tried to issue a network control block (NCB). Action: Be sure that the NETn entries in the configuration file specify valid NetBIOS device drivers and that these device drivers are in the Lanman\Drivers folder. Also, be sure that the Config.sys file contains a DEVICE line specifying the absolute paths of the device drivers. You may be able to increase the NCBs for the listed network by changing an option in the network's NETn entry in the configuration file. See the installation guide that came with your network adapter for information about those options. If you need assistance, contact your network administrator. Error 3127Explanation: This message should occur only on a down-level computer. Any action to correct the problem should be performed on that computer. The server cannot respond to a ReleaseMemory alert. Otherwise, the server is functioning normally. Action: No action is needed. Error 3128Explanation: This message should occur only on a down-level computer. Any action to correct the problem should be performed on that computer. The server cannot respond to a ReleaseMemory alert. Otherwise, the server is functioning normally. Action: No action is needed. Error 3129Explanation: This message should occur only on a down-level computer. Any action to correct the problem should be performed on that computer. The schedule file, Sched.log, in the LOGS directory, is damaged. Action: Restore the schedule file from a backup copy, or delete the file and create a new one using the AT utility. Error 3130Explanation: This message should occur only on a down-level computer. Any action to correct the problem should be performed on that computer. The server could not find the Net.msg file. Action: The NET.MSG file should be in the Lanman\Netprog folder. If it is not there, copy it from the LAN Manager distribution disks. Error 3131Explanation: This message should occur only on a down-level computer. Any action to correct the problem should be performed on that computer. There is not enough memory available to run the Server service. Action: Stop other applications and services (except the Workstation service) that are running on the computer and try again. If the problem continues, you will have to add memory to the computer. Error 3132Explanation: This message should occur only on a down-level computer. Any action to correct the problem should be performed on that computer. The server was unable to access required memory. Action: Be sure there is at least 1 megabyte of free space on the swap disk. The swap disk is specified by the SWAPPATH entry in the Config.sys file. Then, restart the computer and try to start the Server service again. Error 3140Explanation: A software error occurred. Action: Contact technical support. Error 3141Explanation: This message should occur only on a down-level computer. Any action to correct the problem should be performed on that computer. A software error occurred. Action: Contact technical support. Error 3150
Error 3151Explanation: This message should occur only on a down-level computer. Any action to correct the problem should be performed on that computer. The Messenger service could not display a message because an error occurred while the message box was being created. Action: If message logging was on, the message was still logged to the file and can be viewed by displaying or printing the message log file. Error 3152Explanation: A software error occurred. Action: Contact technical support. Error 3160Explanation: This message should occur only on a down-level computer. Any action to correct the problem should be performed on that computer. The workstation's main information segment is larger than the largest segment that can be allocated. Action: Decrease the values for one or more of the following entries in the [workstation] section of the configuration file. If you need assistance, contact your network administrator. MAXCMDS NUMCHARBUF NUMWORKBUF MAXTHREADS NUMDGRAMBUF SIZCHARBUF NUMALERTS NUMSERVICES SIZERRORAfter you change the configuration file, restart the Workstation service. If you change the MAXCMDS or MAXTHREADS entry, you will have to restart the computer. Error 3161Explanation: This message should occur only on a down-level computer. Any action to correct the problem should be performed on that computer. A software error occurred. Action: Contact technical support. Error 3162Explanation: This message should occur only on a down-level computer. Any action to correct the problem should be performed on that computer. A software error occurred. Action: Contact technical support. Error 3163Explanation: This message should occur only on a down-level computer. Any action to correct the problem should be performed on that computer. The Workstation service may have been started improperly. Always use the NET START command to start the workstation; do not run Wksta.exe directly. Action: To start the Workstation service, type: NET START WORKSTATION If more problems occur, contact technical support. Error 3164Explanation: This message should occur only on a down-level computer. Any action to correct the problem should be performed on that computer. The internal table that maintains information about network servers is full. You can access all network servers normally, but you may not be able to see all servers when you type the NET VIEW command. This happens only on very large networks. Action: Contact your network administrator. Your administrator may want to divide the network into domains, using the DOMAIN entry in each computer's configuration file. Error 3165Explanation: This message should occur only on a down-level computer. Any action to correct the problem should be performed on that computer. A software error occurred. Action: Contact technical support. Error 3166Explanation: This message should occur only on a down-level computer. Any action to correct the problem should be performed on that computer. The Workstation service failed to start the user accounts database. Action: Contact technical support. Error 3167Explanation: This message should occur only on a down-level computer. Any action to correct the problem should be performed on that computer. A software error occurred. Action: Contact technical support. Error 3170Explanation: A software error occurred. Action: Contact technical support. Error 3171Explanation: This message should occur only on a down-level computer. Any action to correct the problem should be performed on that computer. An error occurred when LAN Manager tried to identify the members of the specified group. The group is probably too large. Action: Split the group into two or more smaller groups. Error 3172Explanation: An error occurred when an alert message was sent. The user name designated to receive the alert may no longer exist. Action: Use Server Manager to repair the error. Error 3173Explanation: A software error occurred. Action: Verify that the Alerter service has been started. If the service has already been started, contact technical support. Error 3174Explanation: This message should occur only on a down-level computer. Any action to correct the problem should be performed on that computer. LAN Manager cannot read the schedule file because the file is damaged. Action: Restore the schedule file from a backup copy, if you have one. If not, delete the file and create a new one with the AT utility. Error 3175Explanation: This message should occur only on a down-level computer. Any action to correct the problem should be performed on that computer. The schedule file contains a record with an invalid format. Action: Restore the schedule file from a backup copy. If you do not have one, delete the AT schedule file and create a new one with the AT utility. Error 3176Explanation: This message should occur only on a down-level computer. Any action to correct the problem should be performed on that computer. The server created a schedule file. Action: No action is needed. Error 3177Explanation: This message should occur only on a down-level computer. Any action to correct the problem should be performed on that computer. The server could not start one of its networks. Action: Be sure that each network listed in the SRVNETS entry in the server's configuration file has a corresponding entry in the [networks] section of the configuration file. Error 3178Explanation: This message should occur only on a down-level computer. Any action to correct the problem should be performed on that computer. You used the AT utility to specify a program that could not run. Action: Check the filename of the program you tried to schedule. If it is in a directory that is not on the computer's search path, be sure to specify its full path. Be sure that all programs you schedule are executable. Error 3180Explanation: This message should occur only on a down-level computer. Any action to correct the problem should be performed on that computer. An error occurred when the lazy-write process tried to write to the specified hard disk. Action: Run CHKDSK on the specified drive to check for problems with the disk or the files affected by the lazy-write process. Error 3181Explanation: This message should occur only on a down-level computer. Any action to correct the problem should be performed on that computer. The fault-tolerance system found a bad disk sector and rerouted data to a good sector (this is called hotfixing). No data was lost. Action: Run CHKDSK soon to ensure that enough good disk sectors are available for hotfixing. Error 3182Explanation: This message should occur only on a down-level computer. Any action to correct the problem should be performed on that computer. An error occurred during an operation on the listed disk because of problems with the disk. The operation probably did not succeed. Action: Retry the operation. If the problem persists and you are unable to recover data from the disk, use backups of the affected files, if you have any. Error 3183Explanation: This message should occur only on a down-level computer. Any action to correct the problem should be performed on that computer. The user accounts database file is damaged, so the backup file made at the listed date is now being used. Changes made to the user accounts database since this time were lost. Local security is still in effect. Action: To update the user accounts database, retype changes made to it since the listed date. Error 3184Explanation: This message should occur only on a down-level computer. Any action to correct the problem should be performed on that computer. The user accounts database file is missing, so the backup file made at the listed date is now being used. Changes made to the user accounts database since this time were lost. Local security is still in effect. Action: To update the user accounts database, retype changes made to it since the listed date. Error 3185Explanation: This message should occur only on a down-level computer. Any action to correct the problem should be performed on that computer. Local security could not start because the user accounts database file, Net.acc, is missing or damaged and no backup file exists on the hard disk. Action: Restore Net.acc from a backup. The backup file will be named either Net.acc or Netacc.bkp. Then restart the computer. If there is no backup, reinstall LAN Manager using the Setup program. Error 3186Explanation: This message should occur only on a down-level computer. Any action to correct the problem should be performed on that computer. Local security could not start because of the listed error. Action: Find and correct the cause of the listed error, and then restart the computer. Error 3190Explanation: This message should occur only on a down-level computer. Any action to correct the problem should be performed on that computer. A software error occurred. Action: Contact technical support. Error 3191Explanation: This message should occur only on a down-level computer. Any action to correct the problem should be performed on that computer. The workstation is out of the specified resource. Action: Adjust the workstation's configuration file to increase the amount of this resource. If you need assistance, contact your network administrator. Error 3192Explanation: This message should occur only on a down-level computer. Any action to correct the problem should be performed on that computer. An error occurred on a request that was sent to the specified server. The workstation may have been connected to a resource that is no longer shared. Action: Ask a network administrator to reshare the resource so that you can use it. If this solution fails, contact technical support. Error 3193Explanation: This message should occur only on a down-level computer. Any action to correct the problem should be performed on that computer. The connection between your workstation and the specified server was unexpectedly broken. The server may have been restarted or a network problem may have occurred. Action: If the server was restarted, retry the operation to reestablish the connection. If you need more assistance, contact technical support. This message displays a network control block (NCB) value and the NCB error that was returned. Save this information for technical support. Error 3194Explanation: This message should occur only on a down-level computer. Any action to correct the problem should be performed on that computer. The session with the specified server was ended because the server stopped responding. Action: Ask your network administrator if the server is running. If so, reconnect to the server. The amount of time a workstation waits for a server to respond to a request is determined by the SESSTIMEOUT entry in the workstation's configuration file. If your sessions with servers are frequently ended by this error, you may want to increase the value of SESSTIMEOUT. If you need assistance, contact your administrator. Error 3195Explanation: This message should occur only on a down-level computer. Any action to correct the problem should be performed on that computer. An unexpected network control block (NCB) error occurred on the session with the specified server. The server may have been restarted, or a network problem may have occurred. Action: Ask your network administrator if the server was recently restarted. If you need more assistance, contact technical support. This message displays an NCB value and the NCB error that was returned. Save this information for technical support. Error 3196Explanation: This message should occur only on a down-level computer. Any action to correct the problem should be performed on that computer. An attempt to write data to a file failed. Action: See if the specified disk is full. Also, be sure that you have write permission for the target file. Error 3197Explanation: This message should occur only on a down-level computer. Any action to correct the problem should be performed on that computer. The specified NetBIOS driver found a problem that required the network adapter card to be reset. Resetting the card did not solve the problem. Action: Contact technical support. Error 3198Explanation: This message should occur only on a down-level computer. Any action to correct the problem should be performed on that computer. The amount of the listed resource requested was more than the maximum. The maximum amount was allocated. Action: Ask your network administrator check the workstation's configuration. Additional query words:
Keywords : |
|
Last Reviewed: July 15, 1999 © 2000 Microsoft Corporation. All rights reserved. Terms of Use. |