Terminal Server Error Messages: 3900 to 7999
ID: Q186548
|
The information in this article applies to:
-
Microsoft Windows NT Server version 4.0, Terminal Server Edition
SUMMARY
This article describes Terminal Server error messages 3900 to 7999.
MORE INFORMATION
Error 3900
Message from *** to *** on ***
Error 3902
**** unexpected end of message ****
Error 3905
Press ESC to exit
Error 3910
Current time at *** is ***
Error 3911
The current local clock is *** Do you want to set the local computer's
time to match the time at ***? ***:
Error 3912
Could not locate a time-server.
Error 3913
Could not find the domain controller for domain ***.
Explanation: Either this domain does not have logon security and therefore
does not have a domain controller, or its domain controller is unavailable.
Action: If this domain does not have logon security, you cannot use this
command. Otherwise, retry the command. If the problem persists, ask your
network administrator if the domain controller is running.
Error 3915
The user's home directory could not be determined.
Explanation: The system could not determine your home directory.
Action: Ask your network administrator to add a home directory for you.
Error 3916
The user's home directory has not been specified.
Explanation: The system could not determine your home directory.
Action: Ask your network administrator to add a home directory for you.
Error 3917
The name specified for the user's home directory (***) is not a
universal naming convention (UNC) name.
Explanation: Your home directory is not a network path that can be
connected to. The directory must specify a full path, including the server
and share names.
Action: Ask your network administrator to verify that the home directory
path specified in the user account is correct.
Error 3918
Drive *** is now connected to ***. Your home directory is ***\***.
Error 3919
Drive *** is now connected to ***.
Error 3920
There are no available drive letters left.
Error 3932
*** is not a valid domain or workgroup name.
Explanation: The name you specified is not a valid domain or workgroup
name.
Action: Check the spelling of the name. Retype the command with a valid
domain or workgroup name.
Error 3951
You specified too many values for the *** option.
Explanation: You specified too many values for the listed option.
Action: Retype the command with the correct number of values. To see the
syntax of this command, type:
NET HELP command
Error 3952
You entered an invalid value for the *** option.
Explanation: You typed an invalid value for the listed option.
Action: Retype the command with valid values. To see the syntax of this
command, type:
NET HELP command
Error 3953
The syntax is incorrect.
Explanation: You did not use the correct syntax of this command.
Action: To see the syntax of this command, type:
NET HELP command
Error 3960
You specified an invalid file number.
Explanation: The file identification number you specified is either outside
the valid range or is nonnumeric.
Action: Retype the command with a valid file identification number. To see
a list of the server's open files and their identification numbers, type:
NET FILE
Error 3961
You specified an invalid print job number.
Explanation: The print job identification number you specified is either
outside the valid range or is nonnumeric.
Action: Retype the command with a valid print job identification number. To
see a list of a server's print jobs, type:
NET PRINT \\computername\sharename
Error 3963
The user or group account specified cannot be found.
Explanation: The user or group account you typed does not exist.
Action: Retype the command, specifying an existing account.
Error 3965
The user was added but could not be enabled for File and Print Services
for NetWare.
Error 3966
File and Print Services for NetWare is not installed.
Error 3967
Cannot set user properties for File and Print Services for NetWare.
Error 3968
Password for *** is: ***
Error 3969
NetWare compatible logon
Error 5001
The cluster resource cannot be moved to another group because other
resources are dependent on it.
Error 5002
The cluster resource dependency cannot be found.
Error 5003
The cluster resource cannot be made dependent on the specified resource
because it is already dependent.
Error 5004
The cluster resource is not online.
Error 5005
A cluster node is not available for this operation.
Error 5006
The cluster resource is not available.
Error 5007
The cluster resource could not be found.
Error 5008
The cluster is being shut down.
Error 5009
A cluster node cannot be evicted from the cluster while it is online.
Error 5010
The object already exists.
Error 5011
The object is already in the list.
Error 5012
The cluster group is not available for any new requests.
Error 5013
The cluster group could not be found.
Error 5014
The operation could not be completed because the cluster group is not online.
Error 5015
The cluster node is not the owner of the resource.
Error 5016
The cluster node is not the owner of the group.
Error 5017
The cluster resource could not be created in the specified resource
monitor.
Error 5018
The cluster resource could not be brought online by the resource
monitor.
Error 5019
The operation could not be completed because the cluster resource is
online.
Error 5020
The cluster resource could not be deleted or brought offline because it
is the quorum resource.
Error 5021
The cluster could not make the specified resource a quorum resource
because it is not capable of being a quorum resource.
Error 5022
The cluster software is shutting down.
Error 5023
The group or resource is not in the correct state to perform the
requested operation.
Error 5024
The properties were stored but not all changes will take effect until
the next time the resource is brought online.
Error 5025
The cluster could not make the specified resource a quorum resource
because it does not belong to a shared storage class.
Error 5026
The cluster resource could not be deleted since it is a core resource.
Error 5027
The quorum resource failed to come online.
Error 5028
The quorum log could not be created or mounted successfully.
Error 5029
The cluster log is corrupt.
Error 5030
The record could not be written to the cluster log since it exceeds the
maximum size.
Error 5031
The cluster log exceeds its maximum size.
Error 5032
No checkpoint record was found in the cluster log.
Error 5033
The minimum required disk space needed for logging is not available.
Error 6118
The list of servers for this workgroup is not currently available
Error 7001
The specified session name is invalid.
Error 7002
The specified protocol driver is invalid.
Error 7003
The specified protocol driver was not found in the system path.
Error 7004
The specified Terminal Connection driver was not found in the system
path.
Error 7005
A Registry key could not be created in the Event Log for this session.
Error 7006
A service with the same name already exists on the system.
Error 7007
A close operation is pending on the session.
Error 7008
There are no free output buffers available.
Error 7009
The MODEM.INF file was not found.
Error 7010
The modem name was not found in MODEM.INF.
Error 7011
The modem did not accept the command sent to it. Verify the configured
modem name matches the attached modem.
Error 7012
The modem did not respond to the command sent to it. Verify the modem is
properly cabled and powered on.
Error 7013
Carrier detect has failed or carrier has been dropped due to disconnect.
Error 7014
Dial tone not detected within required time. Verify phone cable is
properly attached and functional.
Error 7015
Busy signal detected at remote site on callback.
Error 7016
Voice detected at remote site on callback.
Error 7017
Transport driver error
Error 7018
This program cannot be run in text mode.
Error 7019
The system has reached its licensed logon limit. Please try again later.
Error 7020
The Terminal Connection you are using is not licensed to use this
system. Your logon request is denied.
Error 7021
The system license has expired. Your logon request is denied.
Error 7022
The specified session cannot be found.
Error 7023
The specified session name is already in use.
Error 7024
The requested operation cannot be completed because the Terminal
Connection is currently busy processing a connect, disconnect, reset, or
delete operation.
Error 7025
An attempt has been made to connect to a session whose video mode is not
supported by the current client.
Error 7026
The license diskette has been installed the maximum number of times.
Either remove it from another system or purchase another license
diskette.
Error 7027
The license diskette had an error while installing. Please contact the
supplier for further information.
Error 7028
The license has already been installed on this system. It cannot be
installed more than once on a given system.
Error 7029
The license diskette has already been removed the maximum number of
times.
Error 7030
The license diskette had an error while removing. Please contact the
supplier for further information.
Error 7031
A Base license is already installed on this machine. Only one Base
license can be installed at a time.
Error 7032
A Base license is not installed on this machine. A Base license must be
installed before any other licenses can be installed.
Error 7033
The Base license cannot be removed while other licenses are installed.
Please remove all other licenses first.
Error 7034
The license cannot be installed because it does not match the Base
license OEM ID. Please obtain the correct OEM license to install.
Error 7035
The application attempted to enable DOS graphics mode. DOS graphics mode
is not supported.
Error 7036
The license diskette does not match the license selected for removal.
Please verify that the desired license diskette is in the drive.
Error 7037
Your interactive logon privilege has been disabled. Please contact your
administrator.
Error 7038
The requested operation can be performed only on the system console.
This is most often the result of a driver or system DLL requiring direct
console access.
Error 7039
No diskette is in the selected drive or the diskette structure is
corrupt and non-readable. Please verify that a valid license diskette is
in the drive.
Error 7040
The client failed to respond to the server connect message.
Error 7041
Disconnecting the console session is not supported.
Error 7042
Reconnecting a disconnected session to the console is not supported.
Error 7043
The license password is incorrect.
Error 7044
The request to shadow another session was denied.
Error 7045
The requested session access is denied.
Error 7046
The requested service or operation cannot be started. A license is
required to enable the requested service or operation. Please contact
your supplier for further information.
Error 7047
The Domain Controller has been configured, but cannot be started. A
license is required to enable the Domain Controller. Please contact your
supplier for further information.
Error 7048
The license has an incompatible version number.
Error 7049
The specified Terminal Connection driver is invalid.
Error 7050
The requested session cannot be shadowed. This may be because the
session is disconnected or does not currently have a user logged on.
Also, you cannot shadow a session from the system console or shadow the
system console.
Error 7051
The requested session is not configured to allow shadowing.
Error 7052
Your request to connect to this WinFrame server has been rejected. Your
WinFrame Client license number is currently being used by another user.
Please call your system administrator to obtain a new copy of the
WinFrame Client with a valid, unique license number. Click OK to
continue.
Error 7053
Your request to connect to this WinFrame server has been rejected. Your
WinFrame Client license number has not been entered for this copy of the
WinFrame Client. Please call your system administrator for help in
entering a valid, unique license number for this WinFrame Client. Click
OK to continue.
Error 7054
Logon failed. The NetWare password is valid, however an error occurred
when attempting to update your password on this domain. Click OK to
continue.
Error 7055
The default administrator for NetWare logons is not configured correctly
for this domain. Notify your system administrator. Click OK to continue.
Error 7056
Required licenses have already been installed. The update license is not
required.
Error 7057
The upgrade license is for a different WinFrame product. WinFrame
upgrades are product specific and can only be applied to the same
WinFrame product.
Error 7058
The required licenses are not installed. Either a WinFrame Base license
or WinFrame Upgrade license needs to be installed to allow more than one
logon.
Error 7059
The serial number is invalid. A valid serial number must be provided in
order to obtain a License Number and continue with the registration
process.
Error 7060
The product SKU field of the serial number is invalid. The product SKU
database does not contain an entry for the given SKU.
Error 7061
The license number is invalid. A valid License Number must be provided
in order to continue with the registration process.
Error 7062
The Activation Code is invalid. A valid Activation Code must be provided
in order to complete the registration process.
Error 7063
The license is not configured for pooling. Please contact the supplier
for further information.
Error 7064
The pool count for a license cannot exceed the user count or be less
than 0.
Error 7065
An error occurred while setting the pool count. Please contact the
supplier for further information.
Error 7066
The configuration Registry has been tampered with or corrupted in the
license area. You must re-install your licenses. Notify your system
administrator.
Error 7067
The configuration Registry has been tampered with or corrupted in the
license area and is missing values. You must re-install your licenses.
Notify your system administrator.
Error 7068
Security identifiers for the license area of the configuration Registry
could not be created. You must re-install your licenses. Notify your
system administrator.
Error 7069
Security identifiers for the license area of the configuration Registry
could not be written. You must re-install your licenses. Notify your
system administrator.
Additional query words:
Keywords :
Version : winnt:4.0
Platform : winnt
Issue type : kbinfo