HP OmniBook Default CONFIG.SYS File

ID: Q100051

The information in this article applies to:

Microsoft Windows 3.1
Microsoft MS-DOS operating system version 5.0
Microsoft Excel for Windows, version 4.0a
Microsoft Word for Windows, version 2.0c

SUMMARY

This article contains the default CONFIG.SYS file that is included with the Hewlett-Packard (HP) OmniBook 300. You can always find this default file on the read-only memory (ROM) drive, usually drive D.

MORE INFORMATION

Default CONFIG.SYS


rem
rem CONFIG.SYS -- OmniBook default startup file for drive C
rem
rem SHELL must refer to COMMAND.COM on drive D.

shell=d:\command.com /p /e:1024 d:\ 

rem Install HIMEM.SYS, the extended memory manager.

device=d:\windows\himem.sys /machine:2

rem Install OBCIC, the OmniBook PCMCIA modem card recognizer TSR, with
rem generic modem recognition turned on.

install=d:\omnibook\obcic.exe /GEN 1

rem Set other system variables. If SMARTDrive is installed,
rem BUFFERS can be set to 10.

files=30
buffers=30

rem OmniBook needs at least 12 stacks available.

stacks=12,256

rem LASTDRIVE=Y leaves one drive letter available for Novell networks.

lastdrive=y

The OmniBook 300 is manufactured by Hewlett-Packard, a vendor independent of Microsoft; we make no warranty, implied or otherwise, regarding this product's performance or reliability.

Additional query words: 4.00a 2.00c 3.10 5.00 config configuration omni book Hewlett Packard

Keywords :
Version : MS-DOS:5.0; WINDOWS:2.0c,3.1,4.0a
Platform : MS-DOS WINDOWS
Issue type :