Garbage or Vertical Lines Print on HP PaintJet

ID: Q100983


The information in this article applies to:
  • Microsoft Windows versions 3.0, 3.0a, 3.1, 3.11


SYMPTOMS

The original Hewlett-Packard (HP) PaintJet printer may print vertical lines through all lines containing graphics or TrueType fonts. The printer may print garbage characters also.


CAUSE

The lines through the characters may occur if the parity for the RS-232 serial interface is set incorrectly. The printer may print garbage characters if the other interface settings do not match the settings in the serial interface dialog box in Control Panel.


RESOLUTION

To correct this problem, check the serial interface settings in Control Panel. The common settings for this printer are 9600 baud, no parity, 8 data bits and 1 stop bit, and XON/XOFF protocol. To set the DIP switches to match this configuration, set them all to the OFF position. (The OFF position is marked with an open circle on the printer.)

The DIP switches are as follows:


   DIP #     Setting         ON          OFF
   -----------------------------------------------------------------
   1         Language        MET         English
   2         Character Set   Roman8      PC8
   3         Protocol        DTR         XON/XOFF
   4 & 5     Parity          See markings on printer (both off is none)
   6 & 7     Baud            See table on printer (both off is 9600) 


MORE INFORMATION

The products included here are manufactured by Hewlett-Packard, a vendor independent of Microsoft; we make no warranty, implied or otherwise, regarding these products' performance or reliability.

Additional query words: w4wprint win31 2.00 2.00a 2.00a-CD 2.00b 2.00c true type ttf paint jet 3.10 3.11

Keywords :
Version : WINDOWS:3.0,3.0a,3.1,3.11
Platform : WINDOWS
Issue type :


Last Reviewed: December 3, 1999
© 2000 Microsoft Corporation. All rights reserved. Terms of Use.