Problems with Calcomp 907 Plotter Driver
ID: Q109202
|
The information in this article applies to:
-
Microsoft Windows versions 3.1, 3.11
SUMMARY
According to Calcomp, the Calcomp 907 plotter driver version 3.00 for
Microsoft Windows 3.1 has configuration problems and limitations that may
affect the desired output on Calcomp plotters that support the 907 command
language.
MORE INFORMATION
The problems concern the plot scaling and transmutation retry features
of the Calcomp 907 driver and the Calcomp 907 plotters themselves and are
listed below.
- Plot Scaling. The resolution setting of the plotter must be set to 2032
dots per inch (dpi) to allow plotter scaling features to be enabled. Any
other resolution cannot scale with the Calcomp driver.
- Transmission Retry. The Calcomp 907 plotter driver configuration allows
changes to the transmutation retry value, but the value entered has no
effect on the transmission retry. Calcomp suggests changing the
transmission retry value by using Microsoft Windows Control Panel.
The following are limitations of the version 3.00 Calcomp 907 plotter
driver:
- Maximum paper size is 128 inches wide by 128 inches long. (This includes
continuous roll paper.)
- Maximum number of copies is 99.
The products included here are manufactured by Calcomp, a vendor
independent of Microsoft; we make no warranty, implied or otherwise,
regarding these products' performance or reliability.
Additional query words:
3.10 3.1 907 Calcomp CALCOMP.HLP project
Keywords :
Version : WINDOWS:3.1,3.11
Platform : WINDOWS
Issue type :