Pentium-Based Machine Hangs with Communication Applications

ID: Q110568


The information in this article applies to:
  • Microsoft Windows versions 3.1, 3.11
  • Microsoft Windows for Workgroups versions 3.1, 3.11


SYMPTOMS

Pentium-based machines with a peripheral component interface (PCI) bus and a 16550 UART chip stop responding (hang) or exhibit other unexpected behavior when you use communication applications, such as Microsoft At Work PC Fax or Microsoft Terminal.

In some cases, you may be able to run the software successfully once but then experience problems when you try to run it a second time (before Windows is restarted).


CAUSE

The PCI bus uses a new universal asynchronous receiver transmitter (UART) chip that identifies itself as a 16550 chip but does not handle the 16-bit buffer the same way that the 16550 UART chip does.

These problems occur if there is data in the chip when the serial communications application attempts to open the communications port. A problem with the chip implementation causes the chip to become trapped in a mode in which data is always detected in its FIFO buffer. The products included here are manufactured by vendors independent of Microsoft; we make no warranty, implied or otherwise, regarding these products' performance or reliability.

Additional query words: appnote 3.11 3.10 3.1 gateway2000 exit restarted gateway Dell XPS AMI motherboard kit machine built-in com comm port ports NEC Image 466ES PCs print Remote Access Services

Keywords : win31 awfax ras wfwg
Version : WINDOWS:3.1,3.11
Platform : WINDOWS
Issue type :


Last Reviewed: September 22, 1999
© 2000 Microsoft Corporation. All rights reserved. Terms of Use.