Cannot Use Novell Network After Upgrading Compaq DOS

ID: Q127058

The information in this article applies to:
  • Microsoft Windows 95

SYMPTOMS

After you install Windows 95 on a computer running Compaq DOS, you cannot log on to the Novell network using EMSNETX.EXE as the network redirector.


CAUSE

EMSNETX.EXE (Novell's EMS version of NETX.EXE) requires that an EMS provider be loaded. Compaq DOS uses CEMM.EXE as the EMS provider. When you install Windows 95, Setup removes the following line from the CONFIG.SYS file, disabling the EMS provider: 


   DEVICE=<path>\CEMM.EXE RAM


RESOLUTION

Adding the CEMM.EXE line back to the CONFIG.SYS file is not recommended. CEMM.EXE may not work correctly in Windows 95. The preferred solution is to install the Windows 95 client for NetWare networks. To do so, follow these steps:

  1. Click the Start button, point to Settings, then click Control Panel.


  2. Double-click the Network icon.


  3. Click the Add button on the Configuration tab.


  4. Click Client and then click the Add button.


  5. In the Manufacturers box, click Microsoft. In the Network Clients box, click Client For NetWare Networks. Click the OK button.


  6. Click the OK button, and then when you are prompted to, restart the computer.


You could also use NETX.EXE instead of EMSNETX.EXE. The third-party products discussed here are manufactured by vendors independent of Microsoft; we make no warranty, implied or otherwise, regarding these products' performance or reliability.

Keywords :
Version :
Platform :
Issue type :


Last Reviewed: September 2, 1999
© 2000 Microsoft Corporation. All rights reserved. Terms of Use.